New products

Showing 37-72 of 6865 item(s)

Miniature Circuit Breaker Acti9 NG125H 2P 50 A Curve C

Last units

Miniature circuit breakers

Miniature Circuit Breaker Acti9 NG125H 2P 50 A Curve C

IMPO 18720

Miniature circuit breaker Acti9 NG125H, 2 poles, 50 A, Curve C, with breaking capacity of 36 kA at 380-415 V AC, thermal-magnetic design, DIN 35 mm rail mounting, suitable for installations in small businesses and buildings, featuring position indicator and integrated lock for operational safety.

Available

Industrial automation

Empty control station 16 holes 4 rows

IMPO XAPA3116

€129.57

Empty control station of the Harmony XAP range, made of glass-reinforced polyester, designed for 22 mm diameter control and signalling units. It has 16 holes distributed in 4 vertical rows, flush mounting, IP65/IP69K degree of protection and resistance to extreme chemical agents.

Available

Industrial automation

Analog Output Module 2 Channels 0-10 V

IMPO TMC2AQ2V

€104.87

Analog output module for Modicon M221C controllers with 2 voltage outputs in the 0...10 V range, 12-bit resolution, 20 ms conversion time, and 40 ms stabilization time. Supports resistive load with minimum impedance of 2 kΩ, maximum cable length of 30 m.

Internal BOS Bus Extension Kit for Modicon STB

Available

Industrial automation

Internal BOS Bus Extension Kit for Modicon STB

IMPO STBXBE1300K

€188.65

Internal bus extension kit BOS for distributed solutions Modicon STB, compatible with STB standard modules. 24 V DC power supply with operating range 19.2–30 V, logical power output from 5.25 V DC to 1.2 A.

STB Ethernet/IP 10/100 Mbit/s network interface module

Available

Industrial automation

STB Ethernet/IP 10/100 Mbit/s network interface module

IMPO STBNIC2212

€571.71

Standard network interface module for distributed solutions Modicon STB, compatible with Ethernet/IP according to IEEE 802.3, with transmission speed of 10/100 Mbit/s, female RJ45 port with double-armoured braided pair wiring, full duplex support, and 24 V DC power supply with tolerance of 19,2–30 V.

Available

Industrial automation

Standard Digital Input Kit 115 V AC 2 E

IMPO STBDAI5260K

€151.75

Standard digital input kit for Modicon STB systems, with 2 discrete input channels at 115 V AC. Supports positive or negative logic, 1.5 ms response and 1780 V channel isolation for 1 minute. Compatible with STBXBA2000 base and STBPDT2100/2105 power distribution module.

Industrial polycarbonate box Thalassa TBP IP66 IK08 2 units

Available

Industrial electrical paneling

Industrial polycarbonate box Thalassa TBP IP66 IK08 2 units

IMPO NSYTBP16128

€25.11

One-piece moulded polycarbonate industrial case with IP66 and IK08 protection grade, designed for wall mounting in outdoor environments. Made of RAL 7035 grey polycarbonate, resists operating temperatures between -25 °C and +80 °C, with class II electrical insulation and TÜV UL certification.

Available

Industrial automation

Modicon 8-port copper managed switch

IMPO MCSESM083F23F0

€1,256.04

Managed Switch ABE7 with 8 Ethernet 10/100BASE-TX ports on CAT 5E copper cable, HiPER ring and RSTP redundant network support, remote web management, SNMP, SSH and HTTPS, 12–24 V DC power supply, 6 W consumption, DIN 35 mm rail mounting, IP30 protection grade, compatible with industrial standards and advanced security via VLAN, MAC and roles.

Miniature circuit breaker 3P 20 A D curve

Available

Miniature circuit breakers

Miniature circuit breaker 3P 20 A D curve

IMPO M9F23320

€387.59

Miniature 3P circuit breaker with D curve, breaking capacity 10 kA at 480Y/277 V AC, rated current 20 A, thermal-magnetic technology, DIN rail mounting, protection degree IP20, suitable for operating temperatures from -30 °C to 70 °C, certified UL 1077 and CSA C22.2 No 235.

Miniature Circuit Breaker 2P 25 A Curve D

Available

Miniature circuit breakers

Miniature Circuit Breaker 2P 25 A Curve D

IMPO M9F23225

€262.74

Miniature circuit breaker Multi 9 C60SP, 2P, 25 A, Curve D, with breaking capacity of 10 kA at 480Y/277 V AC, UL 1077 and CSA C22.2 No 235 certified, designed to protect circuits in industrial and commercial installations under high voltage and short-circuit current conditions.

Miniature Circuit Breaker 3P 20 A Curve C

Available

Miniature circuit breakers

Miniature Circuit Breaker 3P 20 A Curve C

IMPO M9F22320

€182.78

Miniature circuit breaker Multi 9 C60SP, 3 poles, 20 A, Curve C, designed for DC circuits. Breaking capacity of 10 kA at 480Y/277 V DC, with thermal-magnetic protection. Complies with UL 1077, CSA C22.2 No 235, and IEC 60529 standards.

Coil for contactor TeSys D LX1D8 380 V AC 50/60 Hz

Available

Contactors

Coil for contactor TeSys D LX1D8 380 V AC 50/60 Hz

IMPO LX1D8Q7

€114.39

TeSys D contactor coil model LX1D8, designed for LC1D115 and LC1D150 contactors. It works with AC control voltage of 380 V at 50/60 Hz, with average strength of 21,011 at 20 °C and inductance of 482,42 H.

Current Transformer 400 A, 4-Pole, Class 0.5

Available

Transformers

Current Transformer 400 A, 4-Pole, Class 0.5

IMPO LV432654

€1,321.44

4-pole current transformer, 400 A, ratio 400/5 A, accuracy class 0.5, rated voltage 530 V, frequency 50/60 Hz, connection via 2.5 mm² cable connector, protection rating IP40 and IK04, compatible with ComPact NSX400/630, INSE and NB ranges, designed for control applications in AC systems.

Enclosed DOL Starter TeSys LG1K 2.5-4A 380VAC

Available

Motor Starters and Motor Protection Circuit Breakers

Enclosed DOL Starter TeSys LG1K 2.5-4A 380VAC

IMPO LG1K065Q708

€333.80

TeSys LG1K locked DOL starter, designed for safety applications with AC-3 employment category. It supports up to 1.5 kW at 400/415 V AC, with thermal protection adjustment range from 2.5 to 4 A. Control using white (I) and black (O) pushbuttons, and red emergency stop rotary control.

Schneider TeSys D 3P 16 A AC-3 Contactor

Available

Contactors

Schneider TeSys D 3P 16 A AC-3 Contactor

IMPO LC1D123P7

€50.82

Electrical contactor from the TeSys D range, designed for motor and resistive load control. Features 3 normally open poles, 230 V AC 50/60 Hz control voltage, AC-3/AC-4 duty category, rated current of 16 A at 60 °C, and switching power up to 7.5 kW at 690 V AC.

PC connection cable for Modicon M340 CPU 4.5 m

Available

Industrial automation

PC connection cable for Modicon M340 CPU 4.5 m

IMPO BMXXCAUSBH045

€203.90

Connection cable for Modicon M340 CPU with 4.5 m length, designed for industrial communications in automated environments. Supports Modbus TCP protocol and physical connection type RJ45. Resistant to electromagnetic interference and with high durability insulation, ensuring stability in critical installations.

Pre-formed cable 40P 10 m 20 wires AWG 22

Available

Industrial automation

Pre-formed cable 40P 10 m 20 wires AWG 22

IMPO BMXFCW1001

€138.57

40P terminal block with 10 m pre-formed cable, 20 wires, AWG 22 gauge, 0.324 mm² cross-section, color-coded according to DIN 47100, designed for 40-pin Modicon X80 I/O modules.

Discrete I/O Module 8 Inputs 8 Relay Outputs 24 V DC

Available

Industrial automation

Discrete I/O Module 8 Inputs 8 Relay Outputs 24 V DC

IMPO BMXDDM16025

€320.93

Discreet I/O module of the Modicon X80 range with 8 digital input current collector (24 V DC positive) and 8 discrete outputs via relay. It supports output voltages up to 240 V AC/30 V DC with a maximum current of 2000 mA.

Passive I/O Base 16 Channels Modicon Atrium

Available

Industrial automation

Passive I/O Base 16 Channels Modicon Atrium

IMPO ABE7H16R10

€58.36

Passive I/O base for discrete I/O systems in Modicon Atrium, with 16 independent channels, DC power supply 19...30 V, connection via screw terminals for flexible and solid wires with cross-section 0,09...2,5 mm², maximum current per channel 0,5 A, protected by internal 2 A fuse, IP41 protection rating, compatible with 35 mm DIN rail, certified according...

Acti9 C120N 2P 63 A B Curve Automatic Switch

Available

Miniature circuit breakers

Acti9 C120N 2P 63 A B Curve Automatic Switch

IMPO A9N18344

€102.62

Miniature automatic switch Acti9 C120N, 2 poles, 63 A, B curve, with breaking capacity Icn 10,000 A according to IEC 60898-1, nominal operating voltage 230-400 V AC, 50/60 Hz, design with 35 mm DIN rail mounting, position indicator, and IP20 protection, suitable for residential and small commercial applications.

Acti9 iC60L 4P 1 A K Curve Magnetic Thermal Circuit Breaker

Available

Miniature circuit breakers

Acti9 iC60L 4P 1 A K Curve Magnetic Thermal Circuit Breaker

IMPO A9F95401

€231.07

Miniature circuit breaker 4P, 1 A, K curve, with breaking capacity of 15000 A (IEC 60898-1) and 100 kA (IEC 60947-2), designed to protect circuits in residential and small commercial installations. Compatible with DIN rail mounting, supports voltages up to 440 V AC, and features electrical durability of 10000 cycles.

Acti9 iC60L 3P 2 A K Curve Magnetic Thermal Circuit Breaker

Available

Miniature circuit breakers

Acti9 iC60L 3P 2 A K Curve Magnetic Thermal Circuit Breaker

IMPO A9F95302

€167.92

Miniature circuit breaker 3P, 2 A, K curve, with breaking capacity Icn 15000 A (400 V AC) according to IEC 60898-1 and Icu 100 kA (220-240 V AC) according to IEC 60947-2.

PratiKa Unika 32 A mounting box with punched holes

Available

CETAC Plugs and Sockets

PratiKa Unika 32 A mounting box with punched holes

IMPO 83920

€27.15

Wall mounting box of the PratiKa Unika range, designed for industrial electrical installations. Made of self-extinguishing polymer, with fire resistance of 750 °C and IP65 protection grade.

Available

Accessories for electric boxes

Extended red side rotary handle 250

IMPO 31058

€55.15

Extended lateral rotary command of direct style, with red handle and yellow front plate, designed for integration into equipment of the ranges INV100...250 and INS250. Made without mercury, it complies with proactive compliance with the EU RoHS Directive and does not contain hazardous SVCH substances, ensuring environmental compatibility and...

Acti9 P25M 3P 18 A K Curve Motor Protector

Available

Motor Starters and Motor Protection Circuit Breakers

Acti9 P25M 3P 18 A K Curve Motor Protector

IMPO 21111

€80.53

Miniature circuit breaker Acti9 P25M, 3 poles, 18 A, K curve, designed for motor protection. Thermal-magnetic technology, breaking capacity Icu 15 kA at 400...415 V AC, 50/60 Hz. Suitable for AC-3 applications, with position indicator and 35 mm DIN rail mounting. Complies with Icu standards, certifications CEBEC, NEMKO, IMQ, SEMKO, DEMKO.

Miniature Circuit Breaker 3P 20 A D Curve 50 kA

Available

Miniature circuit breakers

Miniature Circuit Breaker 3P 20 A D Curve 50 kA

IMPO 18850

€354.75

Miniature circuit breaker Acti9 NG125L, 3-pole, 20 A, D curve, with breaking capacity Icu of 50 kA at 380–415 V AC, thermal-magnetic design, DIN 35 mm rail mounting, suitable for installations in small buildings and small businesses, with position indicator and integrated lock.

Miniature Circuit Breaker Acti9 NG125N 2P 25 A Curve C

Available

Miniature circuit breakers

Miniature Circuit Breaker Acti9 NG125N 2P 25 A Curve C

IMPO 18624

€93.13

Miniature circuit breaker Acti9 NG125N, 2 poles, 25 A, Curve C, with breaking capacity Icu of 25 kA at 380–415 V AC, thermal-magnetic design, 35 mm DIN rail mounting, suitable for installations in small shops and buildings, with position indicator and integrated lock for safety.

Available

Industrial automation

Red mushroom head 30 mm trigger action

IMPO ZB4BT844

€38.08

Standard 30 mm mushroom head for emergency stop pushbutton with mechanical locking, made of silver chrome-plated metal, with a mounting diameter of 22 mm. Features IP66/IP67/IP69K protection rating and shock resistance up to 50 gn, suitable for demanding industrial environments.

2-position selector head black textured knob

Available

Industrial automation

2-position selector head black textured knob

IMPO ZB4BD29

€20.64

Standard 2-position selector head with rough black knob, 22 mm front mount, made of silver chromed metal. Designed for demanding industrial applications, it offers high pressure wash resistance (IP69K), 1,000,000-cycle mechanical durability and shock protection (IK06).

Available

Accessories for electric boxes

6.5 mm triangular closing insert

IMPO NSYTT6CRN

€32.82

6.5 mm triangular locking insert designed for Space CRN and Thalassa PLM cabinet systems. Compatible with CRNG Spacial range, direct mounting in standard closure. Made of resistant material, without SVCH, proactive compliance with EU RoHS and mercury free. Green Premium product, suitable for multipurpose applications in industrial and commercial...

Modular insulated box Thalassa PLS 36x54x23 cm

Available

Industrial electrical paneling

Modular insulated box Thalassa PLS 36x54x23 cm

IMPO NSYPLS3654AG

€163.08

Thalassa PLS modular insulation box, one-piece polyester molded body reinforced with fiberglass, transparent cover in polycarbonate. Class II insulation, degree of protection IP66 and IK09. Nominal dimensions: 360 mm (high) × 540 mm (width) × 230 mm (deepness). Wall mounting.

Wall-mounted polyester insulated cabinet 530x430x200 mm with glass door

Available

Frames and doors for electrical enclosures

Wall-mounted polyester insulated cabinet 530x430x200 mm with glass door

IMPO NSYPLM54TG

€452.14

Compact polyester wall cabinet reinforced with fiberglass and tempered glass door, with dimensions 530x430x200 mm. Designed for wall installation, it offers IP66 protection and IK08 protection grade. Electrical insulation class II, temperature resistant between -40 °C and +80 °C.

Steel reinforcement plate 800 mm for modular chassis

Available

Accessories for electric boxes

Steel reinforcement plate 800 mm for modular chassis

IMPO NSYMPS80

€126.43

Steel reinforced sheet supports with zinc coating, designed for modular assembly in cabinet structures and chassis coupling assemblies. Dimensions: 800 mm depth, 75 mm width, 50 mm height. Includes 23 die drills for screw fixing. Compatible with Spacial SF and SMHF ranges.

Coil for contactor TeSys D LX1D8 220 V AC 50/60 Hz

Available

Contactors

Coil for contactor TeSys D LX1D8 220 V AC 50/60 Hz

IMPO LX1D8M7

€114.39

TeSys D contactor coil model LX1D8, designed for LC1D115 and LC1D150 contactors. It works with AC control voltage from 220 V to 50/60 Hz, average strength from 9895 to 20 °C, closed circuit inductance of 210.72 H.

Coil for contactor TeSys D LX1D8 24 V AC 50/60 Hz

Available

Contactors

Coil for contactor TeSys D LX1D8 24 V AC 50/60 Hz

IMPO LX1D8B7

€114.39

Tesys D contactor coil model LX1D8, designed for LC1D115 and LC1D150 contactors. It works with AC control voltage from 24 V to 50/60 Hz, with closed circuit inductance of 3.03 H.

PrismaSeT XS Transparent Door 24 Modules 1 Row

Available

Frames and doors for electrical enclosures

PrismaSeT XS Transparent Door 24 Modules 1 Row

IMPO LVSXDT124

€176.64

Transparent door of the PrismaSet XS range, designed for recessed or surface mounting, with 24 18 mm modules in a single row. Made of colourless glass and EIA steel, it offers IP40 and IK09 protection. Compatible with PrismaSet ZENcelo ELV+ systems. It supports operating temperatures between -25 °C and +60 °C.

Inicios