Ruko-102124-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 28 mm)

Ruko-102124-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 28 mm)

Ruko-102124-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 28 mm)

Ruko-102124-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 28 mm)

RUKO HSS 90º conical countersink Ø max. 28 mm DIN 335 form C

Brand: Ruko

Reference TUR 102124

Last items in stock

€71.62

VAT included

The Ruko-102124 conical countersink, with a maximum diameter of 28 mm, features a 90° countersinking angle and an optimized design for precise cuts in non-ferrous metals, steel, and plastics. It includes a translucent plastic case.

In stock 2 Items

Email address

Description

The Ruko-102124 is a high-precision tapered countersink, designed according to DIN 335, offering a 90° countersinking angle and a maximum diameter of 28 mm. This tool is ideal for countersinking a wide variety of materials, including steel, cast iron, light and non-ferrous metals, as well as thermoplastics and hard plastics. Its innovative design and high-speed steel (HSS) construction ensure exceptional performance and a long service life.

The DIN 1412 C split point cutting edge and 118° cutting angle, along with a 20/30° taper angle, allow for efficient and precise cutting.

The CBN grinding and chip evacuation channels are optimized to minimize noise, vibration, and burr formation, resulting in a superior finish on every job.

Cutting point with split point DIN 1412 C
Cutting angle: 118º
Cone angle: 20/30º
Right-hand cutting
Chip evacuation channel design
Suitable for non-ferrous metals, steel, and hard plastics
Sheet metal capacity up to 4 mm thick
Translucent plastic case with hanger
Cylindrical shank
3 cutting edges

Product Details

High: 3,30
Width: 3,30
EAN: 4007140002914
Manufacturer: Ruko
Weight (kg): 0,0900
Depth: 8,10
Reference: TUR 102124
GPSR Safety warning: No
GPSR Manufacturer information: AGHASA TURIS S.A, Calle de Rey Pastor, 17
28914 Leganés, Madrid - +34916334450
GPSR EU responsible person: AGHASA TURIS S.A, Calle de Rey Pastor, 17
28914 Leganés, Madrid - +34916334450
GPSR e-mail manufacturer: [email protected]

In stock 2 Items

Reviews (0)

No reviews

11 other products in the same category:

Broca Alpen Madera Larga Timber Twist Ø 3,0 x 250 mm. (Blister 1 Unidad)

Broca Alpen Madera Larga Timber Twist Ø 3,0 x 250 mm. (Blister 1 Unidad) 2

Drills

Alpen Long Wood Timber Twist Drill Bit Ø 3.0 x 250 mm. (Blister 1 Unit)

AFT 09083250

Alpen Long Timber Twist Wood Drill Bit - Measurement: Ø 3.00 mm.- Length: 250 mm.- The new TIMBER TWIST allows work without interruptions. Thanks to the drastic decrease in friction when drilling, it not only requires the application of les

SDS Plus adapter with manual chuck Bosch 2607000982

Available

Drills

SDS Plus adapter with manual chuck Bosch 2607000982

SCO 35957

The Bosch SDS Plus adapter with manual chuck allows you to use manually held drill bits in tools with SDS Plus system. Its robust design ensures a secure grip and easy installation. Ideal for drilling jobs in various materials, it combines versatility and efficiency in daily use.

Ruko-A102156-Juego de 6 avellanadores cónicos, DIN 335 forma C

Available

Drills

Set of 6 RUKO DIN 335 form C conical countersinks, HSS steel, 90° angle.

TUR A102156

Set of 6 Ruko-A102156 conical countersinks, DIN 335 form C. Designed with a split point cutting edge and a 118° angle, they are ideal for non-ferrous metals, steel, and plastics. Includes a plastic case with a transparent lid.

Ruko-204145-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 14,50 mm)

Drills

RUKO HSS milled helical drill bit, diameter 14.50 mm, tapered shank DIN 345.

TUR 204145

Ruko-204145 high-performance twist drill bit with a DIN 345 type N tapered shank. 14.50 mm diameter, suitable for drilling steel, cast iron, and alloys. High break strength, 118° cutting angle, and bright finish. Includes plastic case.

Ruko-108550-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 50 mm)

Drills

RUKO HSS hollow drill bit with Weldon shank, 55 mm deep and 50 mm in diameter.

TUR 108550

Ruko-108550 HSS hollow drill bit with Weldon shank and 55 mm depth (Ø 50 mm). Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Includes a translucent plastic case.

Bi-Metal Hole Saw 32mm High-Speed Steel

Drills

Bi-Metal Hole Saw 32mm High-Speed Steel

SCO 39765

The 32mm bi-metal hole saw is designed for cutting through metals, aluminum, wood, and PVC. Its high-speed steel construction ensures durability and precision for both professional and DIY applications.

Ruko-102407-Avellanador plano DIN 373 180º HSS paso fino rosca M12

Drills

RUKO fine pitch flat countersink DIN 373 M12 180º HSS

TUR 102407

The Ruko-102407 is a DIN 373 180° flat countersink made of fine-pitch HSS. Designed for hex and socket head screws, it is ideal for steel, cast iron, and light metals. A translucent plastic case is included.

Broca Stein Widia Carburo Tungsteno 14

Broca Stein Widia Carburo Tungsteno 14 2

Available

Drills

Widia tungsten carbide stein drill bit 14 mm

ALFA 47064

High quality drill bit.For drilling concrete, stoneware brick.

Ruko-217315-Broca centradora doble DIN 333 A HSS (Ø 3,15 mm)

Available

Drills

RUKO double centering drill bit DIN 333 A HSS Ø 3.15 mm for drilling precision.

TUR 217315

DIN 333 A HSS double centering drill (Ø 3.15 mm) designed for centering holes. It features a 60° centering angle and a 120° rake angle, with h9 tolerance and right-hand cutting. Ideal for precision applications.

Broca Hss Din 338 N Mango Reducido M-25

Available

Drills

Hss Drill Bit Din 338 N Reduced Handle M-25

COF 09732500R

Drills with reduced handle in high-speed steel rectified HSS DIN 338N 118º. For steel and iron. Color blackDiameter [mm]: 25 Reduced handle diameter: 13

Ruko-204155-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 15,50 mm)

Available

Drills

RUKO 15.50 mm HSS twist drill bit, milled type N DIN 345 with tapered shank.

TUR 204155

Ruko-204155 high-performance twist drill bit with tapered shank, DIN 345 type N HSS milled (Ø 15.50 mm). Ideal for drilling steel, cast iron, and alloys. High break strength and bright finish. Includes translucent plastic case.

Product added to wishlist