Ruko-101050-9T-Broca escalonada HSS-TiN Ø 4,0-12,0 mm (9 pasos)

Ruko-101050-9T-Broca escalonada HSS-TiN Ø 4,0-12,0 mm (9 pasos)

RUKO HSS-TiN Stepped Drill Bit Ø 4.0-12.0 mm (9 steps) for precise drilling.

Brand: Ruko

Reference TUR 101050-9T

Out of stock

€71.67

VAT included

Ruko-101050-9T HSS-TiN stepped drill bit, ideal for drilling sheet metal up to 4 mm thick. Features 9 steps, an optimized cutting design, and spiral chip ejection channels. Includes a translucent plastic storage case.

Email address

Description

The Ruko-101050-9T step drill bit is a high-precision tool designed for drilling sheet metal in various industries, including electrical, plumbing, heating, and automotive. Its innovative design incorporates a split point cutting edge according to DIN 1412 C, allowing for easier and more precise drilling starts. With a 118° cutting angle and a 90° taper angle, this drill bit ensures efficient and clean cutting, optimizing performance with every use.

CBN (Cubic Boron Nitride) grinding and spiral chip flutes minimize noise, vibration, and burr formation, guaranteeing a more comfortable and effective drilling process. Each step of the drill bit is radially adjusted and ground, with clearly laser-marked steps for ease of use.

This tool is suitable for sheet metal up to 4 mm thick and comes in a translucent plastic case with a hanger, ideal for storage and transport.

Model: Ruko-101050-9T
Type: HSS-TiN Step Drill Bit
Diameter: Ø 4.0-12.0 mm (9 steps)
Cutting Point: Split point DIN 1412 C
Cutting Angle: 118º
Cone Angle: 90º
Cutting: Right-handed
Material: Suitable for sheet metal up to 4 mm thick
Rectified: CBN
Presentation: Translucent plastic case with hanger

Product Details

High: 1,70
Width: 1,70
EAN: 4007140001450
Manufacturer: Ruko
Weight (kg): 0,0200
Depth: 7,50
Reference: TUR 101050-9T
GPSR Safety warning: No
GPSR Manufacturer information: AGHASA TURIS S.A, Calle de Rey Pastor, 17
28914 Leganés, Madrid - +34916334450
GPSR EU responsible person: AGHASA TURIS S.A, Calle de Rey Pastor, 17
28914 Leganés, Madrid - +34916334450
GPSR e-mail manufacturer: [email protected]

Reviews (0)

No reviews

12 other products in the same category:

Broca Sds Plus 8 Filos Cortantes Especial Para Hormigon Armado Ø 8 x 160 mm. Broca Paredes, Broca Cimientos, Broca Muros

Broca Sds Plus 8 Filos Cortantes Especial Para Hormigon Armado Ø 8 x 160 mm. Broca Paredes, Broca Cimientos, Broca Muros 2

Available

Drills

SDS Plus Drill Bit 8 Cutting Edges Special for Reinforced Concrete Ø 8 x 160 mm. Wall...

WOLFPACK LINEA PROFESIONAL

AFT 09089640

SDS Plus Drill Bit 8 Cutting Edges - Size: Ø 8 x 160 mm.- High-performance drill bit with 8 solid carbide cutting edges, especially suitable for drilling reinforced concrete.- Problem-free drilling of iron fittings.- Runs with minimal vibrations and rapid removal of drilling dust.- Accurate due to symmetrical head geometry.- Fast due to its quadruple...

Broca Sds Plus Para Hormigón Armado 24 X 450 Mm

Broca Sds Plus Para Hormigón Armado 24 X 450 Mm 2

Drills

SDS Plus Drill Bit For Reinforced Concrete 24 x 450 mm

COF 093324450

Drill bits for concrete and reinforced concrete with a compact and reinforced tip with 4 cutting edges. This drill bit is suitable for percussion and rotation. It offers a longer useful life, greater performance and a greater amount of material extracted. Includes SDS PLUS anchor. The measurements included in this range range from 5 to 25 millimeters in...

BROCA ESCALONADA HSS TITANIO WADFOW

BROCA ESCALONADA HSS TITANIO WADFOW 2

Available

Drills

WADFOW 4-12mm Titanium HSS Step Drill Bit, 10mm Hex Shank, 2mm Pitch

GIB 051187

WADFOW Titanium HSS Step Drill Bit, 4-12 mm range, 2 mm pitch. 10 mm (1/4") hex shank. Packed in double blister. Code: WJD14201. EAN13: 6941786816192. Ideal for precise drilling.

Pack 2 brocas metal hss-r din338 1,0x12/34 / 2k fischer EDM 96206

Available

Drills

FISCHER Drill Bits for Metal HSS-R DIN338 1.0x12/34 - Pack 2 units 530403

EDM 96206

FISCHER Metal Drill Bits HSS-R DIN338 1.0x12/34 - Pack 2 units 530403 Metal Drill Bits HSS-R DIN338 1.0x12/34 High-performance metal drill bit 118° point angle for improved cooling and precision Chisel edge with reinforcements Insensitive to lateral forces Robust drill bit with high resistance to breakage Optimal chip extraction thanks to its n-shaped...

Broca hss4341 para metal, rectificada, ø5,00 x 86,00 mm, 10 uds

Broca hss4341 para metal, rectificada, ø5,00 x 86,00 mm, 10 uds 2

Available

Drills

HSS4341 drill bit for metal, ground, ø5.00 x 86.00 mm, 10 pcs

EDM 21433

HSS4341 metal drill bit, measuring ø5.00 x 86.00 mm, ideal for drilling general steel, cast iron, copper, and aluminum. Its design includes a 135-degree split point for precise positioning and extended tool life. Fully ground to h8 precision, it is suitable for speeds of 800 to 1000 rpm. Presented in a pack of 10, it is an essential tool for metalworking.

Ruko-102112-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 9,4 mm)

Ruko-102112-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 9,4 mm) 2

Drills

RUKO HSS 90º conical countersink Ø max. 9.4 mm DIN 335 form C

TUR 102112

The Ruko-102112 conical countersink, with a maximum diameter of 9.4 mm, features a 90° countersinking angle and an optimized design for precise cuts in non-ferrous metals, steel, and plastics. It includes a translucent plastic case.

Ruko-814065-Broca helicoidal metal duro TC DIN 338 Tipo N (Ø 6,5 mm)

Drills

RUKO carbide twist drill bit TC DIN 338 type N Ø 6.5 mm for precise drilling

TUR 814065

TC DIN 338 Type N carbide twist drill bit (Ø 6.5 mm) with a 118° cutting angle and TiAlN coating. Ideal for drilling high-strength steels and other materials. Increases cutting performance and tool life. Individually packaged.

Ruko-253030-Pack de 10 brocas helicoidales largas DIN 340 TL 3000 HSS-Co 5 Cobalto rectificada con autocentrado (Ø 3 mm)

Available

Drills

RUKO twist drills pack of 10, Ø 3 mm, HSS-Co 5 cobalt, DIN 340, self-centering.

TUR 253030

Pack of 10 Ruko-253030 long twist drill bits, made of HSS-Co 5 Cobalt. Designed for drilling medium and hard chipping materials, with a self-centering conical tip. Suitable for steel, titanium, aluminum, and more. Packaged in a translucent plastic case.

FISCHER DRILL SUPER S-3 WIDIA 3x60 BLISTER 2 UNITS 530522

Available

Drills

FISCHER DRILL SUPER S-3 WIDIA 3x60 BLISTER 2 UNITS 530522

SCO 34828

Fischer Super S-3 Widia drill bit is a high-quality drill bit designed for drilling hard materials. With a diameter of 3 mm and a length of 60 mm, it is ideal for precise work. It comes in a blister pack containing two units, guaranteeing durability and performance in every use.

4589

Available

Drills

Alpen SDS Plus F8 drill bit 5.00 x 160 mm.

AFT 09089215

Alpen SDS Plus F8 drill 5.00 x 160 mm.Measure, diameter x length: 5.0 x 160 mm.High performance drill with 4 solid carbide cutting edges, Especially suitable for drilling reinforced concrete.Problem-free drilling of iron fittings.Runs with minimal vibrations and rapid removal of drilling dust. Exact through symmetrical head geometry.

2305

Drills

Alpen Cobalt Nirosta drill bit 4.50 mm. (Blister 1 Piece)

AFT 09081135

Alpen Cobalt Nirosta drill bit 4.50 mm. (Blister 1 Piece)Diameter: 4.5 mm.Special sharpening that guarantees optimum chip evacuation.Great cutting precision and optimal self-centering.Higher feed and drilling speed.Specially indicated for tough and hard materials, such as stainless chrome-nickel steels and resistant to acids.

BROCA WIDIA PORCELANATO - 8X125MM

BROCA WIDIA PORCELANATO - 8X125MM 2

Available

Drills

Widia Porcelain Drill Bit - 8x125mm, SESA TOOLS

GIB 011371

Designed to drill through high-hardness materials, this tool features a carbide tip and optimized geometry that guarantee superior performance. It's ideal for use on surfaces such as porcelain, stone, and granite, offering precision and durability in every application.

Product added to wishlist