Nural- 5 Auto Rearview (1 Tube 0.5 cm³.)

Nural- 5 Auto Rearview Mirror (1 Tube 0.5 cm³.).
- Tube 0.5 cm³.
- Case for a single application. The case is made up of a tube of adhesive (part A) and a nylon mesh (part B). The mesh is activator impregnated and measures 40mm x 40mm. Remove the support, if it came with the rear view mirror. Mark exactly on the outside the correct place where the support is going to be placed.
- Remove all the residue of the previous adhesive that could remain on the support or on the windshield with a knife. Before handling the mesh with activator, check that your hands are free of dirt. Measure the support and cut the mesh to the required size. Cut the nozzle of the tube (part A) and apply the product evenly on the support so that the entire area is covered. Carefully place the mesh on the adhesive of the support.
- Make sure that the support is in the correct position and place it on the windshield in the previously indicated position. Hold the mount tight against the windshield for at least 30 seconds. Before placing the arm of the rear view mirror leave 15 minutes.