507

Brass Manual Brush Standard Welder

Brass Manual Brush Standard Welder

507

Brass Manual Brush Standard Welder

Brass Manual Brush Standard Welder

Manual Brush Soldering Iron Standard

Reference AFT 02220001

Out of stock

€2.02

VAT included

Brass-plated Manual Brush Standard Welder

Brass-plated steel tines.

Uses:

Email address

Description

Manual brass-plated standard welder brush.
- Brass-plated steel tines.
- Uses:
> polishing oxidized surfaces in general.
> polishing welding slag.
> varnish removal.
> removal of small incrustations in general.

Product Details

High: 6
Width: 4
EAN: 8435231923330
Manufacturer: MAURER
Long: 28cm
Measures: 4x4x28 cm
Weight (kg): 0,142
Depth: 28
Reference: AFT 02220001
Safety warning: No
GPSR Safety warning: No
GPSR Manufacturer information: WOLFPACK LINEA PROFESIONAL / Spain / Avenida de Andalucía 139, 18015 Granada / [email protected] / +34 958208900
GPSR EU responsible person: WOLFPACK LINEA PROFESIONAL / Spain / Avenida de Andalucía 139, 18015 Granada / [email protected] / +34 958208900
GPSR e-mail manufacturer: [email protected]

Reviews (0)

No reviews

10 other products in the same category:

Anclaje de acero lp 6.8 zincado blanco 8x80mm 10 ø

Available

Fixing and connection

White zinc-plated steel anchor 8x80mm Ø10mm

EDM 48705

White zinc-plated steel anchor 8x80mm Ø10mm Material: White zinc-plated steel Measurements: 8x80mm Ø10mm High resistance and durability Perfect for fixing elements on concrete surfaces Easy installation and high load capacity

4362

Available

Diy

Zinc-plated thread hooks 4.0/20x70 mm. (Blister 15 Pieces)

WOLFPACK LINEA PROFESIONAL

AFT 06175050

Zinc-plated thread hooks 4.0/20x70 mm. (Blister 15 Pieces)As they are zinc plated they are very resistant to corrosion.Measure (height x length): 4.0/20x70 mm.Blister of 15 pieces.

Disco diam liso humedo 115mm clp18 sw115-p

Available

Abrasives

Smooth Diamond Disc Wet Cut Ø115mm CLP18 SW115 MOTA

MOTA HERRAMIENTAS

EDM 39660

Smooth Wet Cut Diamond Disc Ø115mm CLP18 SW115 Mota Diameter: 115mm Cutting type: Wet Hole: 22.23mm Maximum speed: 13200 RPM Smooth diamond blade for precise cuts Ideal for use on hard materials such as ceramics, porcelain and stone Compatible with angle grinders High resistance and durability Perfect for construction and renovation work

8717

Available

Diy

Lithium Grease Cartridge 400 ml.

AFT 14040050

Lithium Grease 400 ml Cartridge.400 ml Cartridge.Lithium grease is a grease that resists high pressure, prevents corrosion and rust, on metals. Even in the presence of water, it supports temperatures between -15 °C and 160 °C.It can be used in chains, sliders or gears, and is applicable to almost all types of bearings, such as motor windings electrical,...

3137

Available

Diy

Double Sided Tape 2.6 m. x 18mm.

WOLFPACK LINEA PROFESIONAL

AFT 14060180

Double Sided Tape 2.6 m. x 18 mm.Length x width: 2.6 meters x 18 mm.The pieces to be joined must be dry, free of dust and grease. Place the tape on one of the pieces to be joined by pressing the two parts. The maximum resistance is obtained after 24 hours. The use of the tape is not recommended on surfaces that are difficult to adhere to, such as. Rubber,...

7905

Available

Diy

Supergen Classic Glue 40 ml.

AFT 14020002

Supergen Classic Glue 40 ml.40 ml tube.Contact glue for resistant, flexible and long-lasting joints. Indicated for DIY and repair work.It is easy to apply and always guarantees truly professional results.Flexible gluing, it maintains elasticity and accompanies the stresses of each material.Adhesive formulated with harmless organic solvents. Does not...

4070

Available

Diy

Industrial Wheel Gray Rubber Through with brake 100 mm.

WOLFPACK LINEA PROFESIONAL

AFT 11112002

Industrial Gray Rubber Wheel with brake 100 mm.Diameter: 100 mm.Width wheel: 30 mm.Through hole diameter: 12 mm.Made of rubber.

Galvanized Tensioners M 14 mm. 9/16" Domestic Use

Available

Diy

Galvanized turnbuckles M 14 mm. 9/16" Domestic Use

WOLFPACK LINEA PROFESIONAL

AFT 01020078

Galvanized turnbuckles M 14 mm. 9/16" Domestic UseMeasure: M 14 mm. 9/16"Uses: temporary tensioning of cables, ropes, wire, etc.Galvanized , They provide hardness and greater durability against rust.Domestic use.Its use is not appropriate for professional or industrial tasks or for securing any load

136

Available

Diy

Zinc plated ring 4.5x40 mm. (Bag 200 Units)

WOLFPACK LINEA PROFESIONAL

AFT 01050980

Zinc plated ring 4.5x40 mm. (Bag 200 Units)Size: 4.5 x 40 mm.Bag 200 units.Zinc plated, providing greater hardness and durability.

Sierra de corona bim completo con adaptador y broca piloto ø60 wolfcraft

Available

Diy

Wolfcraft BIM Hole Saw with Adapter and Pilot Drill 60mm (5484000)

EDM 82537

Synopsis: Bim hole saw complete with adapter and ø60mm pilot drill bit 5484000 from the Wolfcraft brand. Diameter of the saw: 60mm Includes adapter and pilot drill bit Material: BIM (bi-metal) Compatible with standard drills Ideal for cutting clean holes in wood, plastic and metal Durable and resistant design Easy to use and high precision Perfect for...

Product added to wishlist