List of products by brand Ruko

Showing 1081-1116 of 3267 item(s)

Ruko-815115-Broca helicoidal DiN 338 tipo N con plaquita de corte de metal duro soldada (Ø 11.50 mm)

Available

Drills

RUKO Ø 11.50 mm twist drill with DIN 338 type N carbide cutting insert

TUR 815115

Ruko-815115 DIN 338 Type N Twist Drill with Brazed Carbide Cutting Insert (Ø 11.50 mm). Made of HSS-G, ideal for drilling high-strength steels with permanent coolant. Fine-grain K20 material for universal use.

Ruko-256050-Broca helicoidal DiN 1869 TL 3000 HSS-G extra larga (5x315 mm)

Ruko-256050-Broca helicoidal DiN 1869 TL 3000 HSS-G extra larga (5x315 mm) 2

Drills

RUKO extra long spiral drill bit HSS-G 5x315 mm DiN 1869 TL 3000

TUR 256050

€37.68

The Ruko-256050 5x315 mm twist drill bit is designed for deep drilling under demanding conditions. Made of HSS-G steel, it offers high precision and is suitable for common materials. Slow drilling speeds and frequent chip removal are recommended.

Ruko-1081211-Broca sólida "Solid 3S" HSS vástago Weldon (Ø 11 mm)

Available

Drills

RUKO HSS solid drill bit with Weldon shank Ø 11 mm for high precision and durability.

TUR 1081211

€47.82

Solid 3S HSS drill bit with Weldon shank (Ø 11 mm) for pillar and bench drills. 30 mm drilling depth, CBN ground with three cutting edges. Ideal for drilling steel, light metals, and non-ferrous metals. Includes plastic case.

Ruko-2144010S-Pack de 2 brocas helicoidales DIN 338 tipo N HSS-G vaporizada negra (Ø 1 mm)

Ruko-2144010S-Pack de 2 brocas helicoidales DIN 338 tipo N HSS-G vaporizada negra (Ø 1 mm) 2

Available

Drills

RUKO HSS-G Black Steamed Twist Drill Bits 1 mm - Pack of 2

TUR 2144010S

€2.12

Pack of 2 DIN 338 type N HSS-G black steam-coated twist drills (Ø 1 mm). Made of high-speed steel, they offer high precision and performance. Ideal for drilling in common materials, their design allows for effective centering and low feed effort.

Ruko-224200-Broca SDS-plus 4 labios (20 x 300 mm)

Drills

RUKO SDS-PLUS 4-flute drill bit 20 x 300 mm for drilling in concrete and masonry.

TUR 224200

€56.99

Ruko-224200 SDS-plus 4-flute drill bit (20 x 300 mm) designed for drilling reinforced concrete, granite, and stone. Its stabilized core reduces vibration, while the double-fluted spiral improves material removal. Packaged with a plastic hanging clip.

Ruko-21440525-Broca helicoidal DIN 338 tipo N HSS (Ø 5,25 mm)

Available

Drills

RUKO HSS type N twist drill bit Ø 5.25 mm - DIN 338, high precision and durability.

TUR 21440525

€2.66

DIN 338 type N HSS 5.25 mm twist drill bit, designed for drilling in common materials. It offers high concentricity and rotational accuracy, with right-hand cutting and is suitable for steel, cast iron, and metal alloys.

Ruko-108546-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 46 mm)

Drills

RUKO HSS hollow drill bit, Weldon shank, 55 mm deep (Ø 46 mm)

TUR 108546

€232.13

Ruko-108546 HSS hollow drill bit with Weldon shank, designed for pillar and floor drills. 55 mm depth and 46 mm diameter. Ideal for steel, light metals, and non-ferrous metals. Includes a translucent plastic case.

Ruko-815053-Broca helicoidal DiN 338 tipo N con plaquita de corte de metal duro soldada (Ø 5.30 mm)

Available

Drills

RUKO type N twist drill with cutting insert, diameter 5.30 mm, DIN 338.

TUR 815053

€13.46

Ruko-815053 DiN 338 type N twist drill bit, with a diameter of 5.30 mm. Made of HSS-G and equipped with a welded carbide cutting insert, ideal for drilling high-strength steels with permanent coolant.

Ruko-101050-9E-Broca escalonada HSS-E Co 5 Cobalto Ø 4,0-12,0 mm (9 pasos)

Available

Drills

RUKO HSS-E Co 5 cobalt step drill Ø 4.0-12.0 mm (9 steps)

TUR 101050-9E

€49.09

HSS-E Co 5 Cobalt Step Drill Bit Ø 4.0-12.0 mm, ideal for drilling sheet metal in various industries. Optimized design with right-hand cutting, 118° angle, and spiral flutes for efficient cutting. Includes translucent plastic case.

Ruko-814050-Broca helicoidal metal duro TC DIN 338 Tipo N (Ø 5 mm)

Available

Drills

RUKO carbide twist drill TC DIN 338 Type N Ø 5 mm, high precision.

TUR 814050

€36.89

TC DIN 338 Type N carbide twist drill bit (Ø 5 mm) with a 118° cutting angle and TiAlN coating. Ideal for drilling high-strength steels and other materials. Increases cutting performance and tool life. Individually packaged.

Ruko-108031-Broca hueca con dientes metal duro y asiento de rosca (Ø 31 mm)

Available

Drills

RUKO carbide hollow drill bit Ø 31 mm with threaded seat and high durability.

TUR 108031

€118.04

Ruko-108031 carbide hollow drill bit with a 31 mm diameter and 50 mm depth. Featuring an M18 x 6 P 1.5 internal thread, it is compatible with pillar drills and Fein KBN drills. Ideal for cast steel and chrome alloys.

Ruko-218080-Broca extra larga punta de metal duro y mango hexagonal 8 x 400 mm

Available

Drills

RUKO extra long carbide drill bit, 8 mm x 400 mm, hexagonal shank.

TUR 218080

€12.57

Extra-long carbide drill bit with hexagonal shank, 8 x 400 mm. Designed for drilling concrete, stone, and masonry. Made of special steel, it offers high strength and elasticity. Ideal for hammer drills. Includes individual plastic bag.

Available

Drills

RUKO BRAND HSS TiAIN hollow drill bit Ø 32 mm, Weldon shank, high precision.

TUR 108232F

€148.65

TiAIN-FUTURA HSS hollow drill bit with Weldon shank (Ø 32 mm) and 30 mm cutting depth. Its wear-resistant coating allows for dry drilling, ideal for steel beams and high-chromium steels. Compatible with various drills.

Ruko-123103-Broca SDSplus 4 puntas 10x450mm

Ruko-123103-Broca SDSplus 4 puntas 10x450mm 2

Available

Drills

RUKO SDSplus drill bit, 4 points, 10x450mm, with maximum energy transfer.

TUR 123103

€33.00

The Ruko-123103 10x450mm drill bit features four cutting edges that optimize drilling in concrete. Its design reduces vibration and friction, ensuring shorter drilling times and maximum energy transfer without risk of breakage.

Ruko-259102E-Broca helicoidal FLOWSTEP® HSSE-Co 5 (Ø 10.2 mm)

Available

Drills

RUKO FLOWSTEP® HSSE-Co 5 10.2 mm twist drill bit for metal and wood.

TUR 259102E

€30.19

The Ruko-259102E FLOWSTEP® HSSE-Co 5 (Ø 10.2 mm) twist drill bit offers extended life and allows you to drill up to 5 times more holes. It provides precise centering and an efficient drilling process in portable power tools, without jamming.

Ruko-1081525-Broca hueca con dientes metal duro vástago Weldon para vías de tren (Ø 25 mm)

Available

Drills

RUKO hollow carbide drill bit Ø 25 mm Weldon shank for railway tracks.

TUR 1081525

€104.40

Ruko-1081525 carbide hollow drill bit with Weldon shank, ideal for cutting railway tracks. 25 mm diameter and 25 mm depth. Its design allows for right-hand cutting without the need for pre-drilling or centering.

Ruko-108027-Broca hueca con dientes metal duro y asiento de rosca (Ø 27 mm)

Available

Drills

RUKO carbide hollow drill bit Ø 27 mm with threaded seat and high durability.

TUR 108027

€101.94

Ruko-108027 carbide hollow drill bit with teeth and threaded seat (Ø 27 mm). Depth of 50 mm, M18 x 6 P 1.5 internal thread. Compatible with pillar drills and Fein KBN. Ideal for cast steel and alloys.

Ruko-123120-Broca SDSplus 4 puntas 12x160mm

Ruko-123120-Broca SDSplus 4 puntas 12x160mm 2

Available

Drills

RUKO SDSplus 4-point drill bit 12x160mm with maximum energy transfer.

TUR 123120

€10.99

The Ruko-123120 12x160mm drill bit features four cutting edges that optimize drilling in concrete. Its design reduces vibration and friction, ensuring shorter drilling times and maximum energy transfer without risk of breakage.

Ruko-815036-Broca helicoidal DiN 338 tipo N con plaquita de corte de metal duro soldada (Ø 3.60 mm)

Available

Drills

RUKO type N twist drill Ø 3.60 mm with carbide cutting insert

TUR 815036

€12.46

Ruko-815036 DIN 338 Type N Twist Drill Bit, 3.60 mm diameter, made of HSS-G with a brazed carbide cutting insert. Ideal for drilling high-strength steels, requires continuous cooling for optimal performance.

Ruko-2150375-Pack de 10 brocas helicoidales DIN 338 tipo N HSS-Co 5 Cobalto rectificada con autocentrado (Ø 3,75 mm)

Available

Drills

RUKO HSS-Co 5 cobalt twist drills 3.75 mm DIN 338 type N, pack of 10 units.

TUR 2150375

€16.14

Pack of 10 DIN 338 type N HSS-Co 5 Cobalt twist drills, ground and self-centering (Ø 3.75 mm). Designed for drilling difficult materials, they offer high heat resistance and hardness. Includes a translucent plastic storage case.

Ruko-221100-Broca para hormigón y granito, punta metal duro 10 x 120 mm

Available

Drills

RUKO drill bit for concrete and granite, carbide tip 10 x 120 mm

TUR 221100

€8.69

Ruko-221100 drill bit for concrete and granite, with a 10 x 120 mm carbide tip. Designed for hammer drills, it features a durable cutting edge and a 130° cutting angle, ideal for materials such as marble and brick.

Ruko-204165-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 16,50 mm)

Available

Drills

RUKO 16.50 mm HSS twist drill bit with tapered shank DIN 345 type N

TUR 204165

€21.82

Ruko-204165 high-performance twist drill bit with tapered shank, DIN 345 type N HSS milled (Ø 16.50 mm). Ideal for drilling steel, cast iron, and alloys. High break strength, 118° cutting angle, and bright finish. Includes plastic case.

Ruko-2144070S-Broca helicoidal DIN 338 tipo N HSS-G vaporizada negra (Ø 7 mm)

Ruko-2144070S-Broca helicoidal DIN 338 tipo N HSS-G vaporizada negra (Ø 7 mm) 2

Available

Drills

RUKO HSS-G steamed black twist drill Ø 7 mm DIN 338 type N

TUR 2144070S

€3.73

Ruko-2144070S twist drill bit made of HSS-G high-speed steel, with a diameter of 7 mm. Designed for drilling in common materials, it offers high precision and efficient centering thanks to its conical tip. Ideal for jobs requiring controlled feed.

Ruko-815031-Broca helicoidal DiN 338 tipo N con plaquita de corte de metal duro soldada (Ø 3.10 mm)

Available

Drills

RUKO type N twist drill Ø 3.10 mm with carbide cutting insert

TUR 815031

€12.46

Ruko-815031 DIN 338 Type N Twist Drill with Brazed Carbide Cutting Insert (Ø 3.10 mm). Made of HSS-G, ideal for drilling high-strength steels with permanent coolant. Fine-grain K20 material for universal use.

Ruko-815130-Broca helicoidal DiN 338 tipo N con plaquita de corte de metal duro soldada (Ø 13.00 mm)

Drills

RUKO Ø 13 mm twist drill with DIN 338 type N carbide cutting insert

TUR 815130

€51.74

Ruko-815130 DIN 338 Type N Twist Drill Bit, Ø 13.00 mm, made of HSS-G with a brazed carbide cutting insert. Ideal for drilling high-strength steels, it requires continuous cooling for optimal performance.

Ruko-101060T-Broca escalonada HSS-TiN Ø 6,0-37,0 mm (12 pasos)

Drills

RUKO HSS-TiN Step Drill Bit Ø 6.0-37.0 mm with 12 cutting steps.

TUR 101060T

€288.49

Ruko-101060T HSS-TiN stepped drill bit, 6.0-37.0 mm diameter, ideal for drilling sheet metal up to 4 mm thick. Optimized design with right-hand cutting, 118° angle, and spiral chip flutes. Includes plastic case.

Ruko-224201-Broca SDS-plus 4 labios (20 x 450 mm)

Available

Drills

RUKO SDS-plus drill bit with 4 lips, 20 mm x 450 mm, for efficient drilling.

TUR 224201

€61.49

Ruko-224201 SDS-plus 4-flute drill bit (20 x 450 mm) designed for drilling reinforced concrete, granite, and stone. Its double-fluted spiral improves material removal, while its stabilized core reduces vibration and friction. Packaged with a plastic hanging clip.

Ruko-108018-Broca hueca con dientes metal duro y asiento de rosca (Ø 18 mm)

Available

Drills

RUKO carbide hollow drill bit Ø 18 mm with threaded seat and high durability.

TUR 108018

€105.44

Ruko-108018 carbide hollow drill bit with an 18 mm diameter and 50 mm depth. With an M18 x 6 P 1.5 internal thread, it is compatible with pillar drills and Fein KBN drills. Ideal for cast steel and chrome alloys.

Ruko-108551-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 51 mm)

Drills

HSS RUKO hollow drill bit, Weldon shank 55 mm depth, diameter 51 mm.

TUR 108551

€257.72

Ruko-108551 HSS hollow drill bit with Weldon shank and 55 mm depth (Ø 51 mm). Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Includes a translucent plastic case.

Ruko-815055-Broca helicoidal DiN 338 tipo N con plaquita de corte de metal duro soldada (Ø 5.50 mm)

Available

Drills

RUKO Ø 5.50 mm twist drill with DIN 338 type N carbide cutting insert

TUR 815055

€13.88

Ruko-815055 DIN 338 Type N Twist Drill with Brazed Carbide Cutting Insert (Ø 5.50 mm). Made of HSS-G, ideal for drilling high-strength steels with permanent coolant. Fine-grain K20 material for universal use.

Ruko-108022-Broca hueca con dientes metal duro y asiento de rosca (Ø 22 mm)

Available

Drills

RUKO carbide hollow drill bit with a diameter of 22 mm and a threaded seat.

TUR 108022

€101.94

Ruko-108022 carbide hollow drill bit with a 22 mm diameter and 50 mm depth. Designed for pillar and floor drills, with an M18 x 6 P 1.5 connection. Ideal for cast steel and chrome alloys.

Ruko-211153-Broca SDS-plus S4 (15 x 450 mm)

Drills

RUKO 15mm x 450mm SDS-plus drill bit for drilling in concrete and masonry.

TUR 211153

€30.00

Ruko-211153 SDS-plus S4 drill bit (15 x 450 mm) designed for hammer drills. Made with a carbide insert (Widia) and reinforced core, it offers stability and reduces vibration. Ideal for drilling granite, concrete, stone, marble, and brick.

Ruko-259085E-Broca helicoidal FLOWSTEP® HSSE-Co 5 (Ø 8.5 mm)

Drills

RUKO FLOWSTEP® HSSE-Co 5 twist drill bit, 8.5 mm diameter.

TUR 259085E

€17.34

The FLOWSTEP® HSSE-Co 5 (Ø 8.5 mm) twist drill bit offers extended life and allows you to drill up to 5 times more holes. It provides fast and efficient drilling, precise centering on round surfaces, and a smooth, jam-free drilling process. Compatible with portable drills.

Ruko-259095-Broca helicoidal FLOWSTEP® HSS (Ø 9.5 mm)

Available

Drills

RUKO FLOWSTEP® HSS Ø 9.5 mm helical drill bit, high precision and durability.

TUR 259095

€16.77

The FLOWSTEP® HSS twist drill bit (Ø 9.5 mm) offers extended service life, allowing up to 5 times more holes to be drilled. Its design ensures precise centering and an efficient drilling process, compatible with portable electric drills.

Ruko-2501214TRO-Juego de 19 Brocas HSS-G

Ruko-2501214TRO-Juego de 19 Brocas HSS-G 2

Available

Drills

RUKO 19-piece set of high-precision and durable HSS-G drill bits made of high-speed steel.

TUR 2501214TRO

€54.20

Set of 19 HSS-G DIN 338 type N twist drill bits, with diameters from 1.0 mm to 10.0 mm in 0.5 mm increments. Presented in a practical plastic case, ideal for various drilling applications.

Ruko-211063-Broca SDS-plus S4 (6 x 260 mm)

Available

Drills

RUKO 6mm x 260mm SDS-plus drill bit for drilling in concrete and masonry.

TUR 211063

€9.52

The Ruko-211063 SDS-plus S4 drill bit (6 x 260 mm) is designed for hammer drills with an SDS-plus connection. Made with a carbide insert (Widia) and reinforced core, it offers stability and reduces vibration. Ideal for drilling granite, concrete, stone, and brick.