Industrial automation

Showing 1-36 of 938 item(s)

Remote Receiver Module Modicon TM3

New

Last units

Industrial automation

Remote Receiver Module Modicon TM3

IMPO TM3XREC1

Remote receiver module of the Modicon TM3 range, compatible with M221, M241, M251 and M340 drivers. Power 24 V DC with consumption of 40 mA, supports up to 7 I/O expansion modules. Connection by RJ45 cable up to 5 m, degree of protection IP20, operating between -10°C and 55°C.

40P SUB-D connector 25, 1.5 m terminal block

New

Last units

Industrial automation

40P SUB-D connector 25, 1.5 m terminal block

IMPO BMXFCA152

Pré-formed cab with 40-way SUB-D 25 connector for connection between sub-base and module in Modicon X80 systems. 1.5 m length, compatible with BMXART0414, BMXART0814 and ABE7CPA412. Designed for industrial installations with proactive compliance RoHS EU, without toxic heavy metals or mercury.

16-channel electromechanical relay base 24 V DC

New

Last units

Industrial automation

16-channel electromechanical relay base 24 V DC

IMPO ABE7R16S111

Soldered electromechanical relay base ABE7 for Modicon Atrium system, with 16 channels, 24 V DC power supply, normally open contact per channel, maximum current per common 12 A, electrical durability 500 000 cycles, protection rating IP41, fixed by clips or screws on 35 mm DIN rail.

Analog input kit 0-10 V 2 channels 10 bits

New

Last units

Industrial automation

Analog input kit 0-10 V 2 channels 10 bits

IMPO STBAVI1255K

Basic analog input kit for Modicon STB systems, with 2 voltage channels 0...10 V, 10 bit resolution, single 25 Hz pass filter. It supports cold exchange, 5 ms response time and 10 ms upgrade. Isolation between channels and 1500 V logic bus for 1 minute.

Redundant AC 100-240 V power supply module

New

Available

Industrial automation

Redundant AC 100-240 V power supply module

IMPO BMXCPS4002

Redundant power module for Modicon X80 controllers, compatible with base versions ≥ 3.0. Operates in AC 100–240 V voltage, 50/60 Hz, with secondary output from 18 W to 3.3 V DC and 40 W to 24 V DC. Includes temperature monitoring, redundancy testing and operating status.

Empty control station 16 holes 4 rows

New

Available

Industrial automation

Empty control station 16 holes 4 rows

IMPO XAPA3116

Empty control station of the Harmony XAP range, made of glass-reinforced polyester, designed for 22 mm diameter control and signalling units. It has 16 holes distributed in 4 vertical rows, flush mounting, IP65/IP69K degree of protection and resistance to extreme chemical agents.

Analog Output Module 2 Channels 0-10 V

New

Available

Industrial automation

Analog Output Module 2 Channels 0-10 V

IMPO TMC2AQ2V

Analog output module for Modicon M221C controllers with 2 voltage outputs in the 0...10 V range, 12-bit resolution, 20 ms conversion time, and 40 ms stabilization time. Supports resistive load with minimum impedance of 2 kΩ, maximum cable length of 30 m.

Internal BOS Bus Extension Kit for Modicon STB

New

Available

Industrial automation

Internal BOS Bus Extension Kit for Modicon STB

IMPO STBXBE1300K

Internal bus extension kit BOS for distributed solutions Modicon STB, compatible with STB standard modules. 24 V DC power supply with operating range 19.2–30 V, logical power output from 5.25 V DC to 1.2 A.

STB Ethernet/IP 10/100 Mbit/s network interface module

New

Available

Industrial automation

STB Ethernet/IP 10/100 Mbit/s network interface module

IMPO STBNIC2212

Standard network interface module for distributed solutions Modicon STB, compatible with Ethernet/IP according to IEEE 802.3, with transmission speed of 10/100 Mbit/s, female RJ45 port with double-armoured braided pair wiring, full duplex support, and 24 V DC power supply with tolerance of 19,2–30 V.

Standard Digital Input Kit 115 V AC 2 E

New

Available

Industrial automation

Standard Digital Input Kit 115 V AC 2 E

IMPO STBDAI5260K

Standard digital input kit for Modicon STB systems, with 2 discrete input channels at 115 V AC. Supports positive or negative logic, 1.5 ms response and 1780 V channel isolation for 1 minute. Compatible with STBXBA2000 base and STBPDT2100/2105 power distribution module.

Modicon 8-port copper managed switch

New

Available

Industrial automation

Modicon 8-port copper managed switch

IMPO MCSESM083F23F0

Managed Switch ABE7 with 8 Ethernet 10/100BASE-TX ports on CAT 5E copper cable, HiPER ring and RSTP redundant network support, remote web management, SNMP, SSH and HTTPS, 12–24 V DC power supply, 6 W consumption, DIN 35 mm rail mounting, IP30 protection grade, compatible with industrial standards and advanced security via VLAN, MAC and roles.

PC connection cable for Modicon M340 CPU 4.5 m

New

Available

Industrial automation

PC connection cable for Modicon M340 CPU 4.5 m

IMPO BMXXCAUSBH045

Connection cable for Modicon M340 CPU with 4.5 m length, designed for industrial communications in automated environments. Supports Modbus TCP protocol and physical connection type RJ45. Resistant to electromagnetic interference and with high durability insulation, ensuring stability in critical installations.

Pre-formed cable 40P 10 m 20 wires AWG 22

New

Available

Industrial automation

Pre-formed cable 40P 10 m 20 wires AWG 22

IMPO BMXFCW1001

40P terminal block with 10 m pre-formed cable, 20 wires, AWG 22 gauge, 0.324 mm² cross-section, color-coded according to DIN 47100, designed for 40-pin Modicon X80 I/O modules.

Discrete I/O Module 8 Inputs 8 Relay Outputs 24 V DC

New

Available

Industrial automation

Discrete I/O Module 8 Inputs 8 Relay Outputs 24 V DC

IMPO BMXDDM16025

Discreet I/O module of the Modicon X80 range with 8 digital input current collector (24 V DC positive) and 8 discrete outputs via relay. It supports output voltages up to 240 V AC/30 V DC with a maximum current of 2000 mA.

Passive I/O Base 16 Channels Modicon Atrium

New

Available

Industrial automation

Passive I/O Base 16 Channels Modicon Atrium

IMPO ABE7H16R10

Passive I/O base for discrete I/O systems in Modicon Atrium, with 16 independent channels, DC power supply 19...30 V, connection via screw terminals for flexible and solid wires with cross-section 0,09...2,5 mm², maximum current per channel 0,5 A, protected by internal 2 A fuse, IP41 protection rating, compatible with 35 mm DIN rail, certified according...

Red mushroom head 30 mm trigger action

New

Available

Industrial automation

Red mushroom head 30 mm trigger action

IMPO ZB4BT844

Standard 30 mm mushroom head for emergency stop pushbutton with mechanical locking, made of silver chrome-plated metal, with a mounting diameter of 22 mm. Features IP66/IP67/IP69K protection rating and shock resistance up to 50 gn, suitable for demanding industrial environments.

2-position selector head black textured knob

New

Available

Industrial automation

2-position selector head black textured knob

IMPO ZB4BD29

Standard 2-position selector head with rough black knob, 22 mm front mount, made of silver chromed metal. Designed for demanding industrial applications, it offers high pressure wash resistance (IP69K), 1,000,000-cycle mechanical durability and shock protection (IK06).

24 V DC bus bar gray

New

Available

Industrial automation

24 V DC bus bar gray

IMPO TM5ACBM01R

24 V DC bus base, grey, designed for integration into Modicon TM5, LMC058 and M258 systems. Compatible with remote reception modules and power distribution. Built with PVC-free materials and no toxic heavy metals, it complies with RoHS EU and REACh standards without SVCH. Weight: 0.02 kg.

Digital output kit 2SD relay 24 V 2A screw/spring

New

Available

Industrial automation

Digital output kit 2SD relay 24 V 2A screw/spring

IMPO STBDRC3210K

Standard digital output kit with two 24 V DC relay outputs, 600 VA resistive switching capacity, 1,000,000-cycle mechanical durability and 100,000-cycle electric. Compatible with STBXBA2000 bases and STBPDT3100/3105 power distribution modules.

Basic digital output kit 4 channels 24 V DC

New

Available

Industrial automation

Basic digital output kit 4 channels 24 V DC

IMPO STBDDO3415K

Basic digital output kit for Modicon STB systems, with 4 solid state outputs, 24 V DC operating voltage, positive logic, 560 μs off-a-on response and 870 μs on-a-off. Compatible with STBXBA1000 base and STBPDT3100/3105 power distribution module.

M340 Back Panel Expansion Kit

New

Available

Industrial automation

M340 Back Panel Expansion Kit

IMPO BMXXBE2005

Expansion kit for back panel of the Modicon M340 automatic platform, compatible with BMXXBE1000 modules. Includes cable and line finishers to ensure stable connection in industrial environments. Designed for installation in Class I Division 2 hazardous areas, it complies with IEC 61010-2-201 and ATEX Area 2/22 standards, with CE, UL, CSA and RCM...

4 GB Memory Card for Modicon M580

New

Available

Industrial automation

4 GB Memory Card for Modicon M580

IMPO BMXRMS004GPF

M580 Modicon controller memory card, compatible with BMEP58 processor. It offers 4 GB of storage capacity, with 3.93 GB dedicated to data. Supports up to 100,000 writing cycles and guarantees data retention for 10 years. Designed to operate in industrial environments, with thermal tolerance from -40 to 85 °C.

Passive base Modicon ABE9 IP67

New

Available

Industrial automation

Passive base Modicon ABE9 IP67

IMPO ABE7H34E200

Passive Sub-base Modicon ABE9 with IP67 rating, designed for installation in demanding industrial environments. It offers secure and protected connection for control modules, with total resistance to dust and water. Made of materials conforming to REACh without SVCH and without mercury, it complies with the proactive compliance of RoHS EU.

24 V DC auxiliary power supply kit for I/O module

New

Available

Industrial automation

24 V DC auxiliary power supply kit for I/O module

IMPO STBCPS2111K

Auxiliary power supply kit for I/O modules in distributed solutions Modicon STB. Nominal 24 V DC power supply with regulated output from 5.25 V DC to 1.2 A. Compatible with input voltages from 19,2 to 30 V.

Modicon M340 CANopen Transparent Ready Processor Module

New

Available

Industrial automation

Modicon M340 CANopen Transparent Ready Processor Module

IMPO BMXP3420302

Module processor of the Modicon M340 platform with capacity for 1024 digital I/O and 256 analog I/O in multi-track configuration. Supports CANopen Transparent Ready communication, Ethernet TCP/IP 10/100 Mbit/s and USB 12 Mbit/s port. Includes 36 specific application channels and CANopen independent axis motion control.

Analog output module 2 channels isolated 15 bits

New

Available

Industrial automation

Analog output module 2 channels isolated 15 bits

IMPO BMXAMO0210

2-channel analog output module for Modicon X80 system, with galvanic insulation between channels and earth. It supports current signals 0...20 mA and 4...20 mA, as well as voltage ±10 V.

Modicon M340 11-slot processor module

New

Available

Industrial automation

Modicon M340 11-slot processor module

IMPO BMXP342000

Module processor of the Modicon M340 platform, with capacity for 1024 digital inputs/outputs and 256 analog inputs/outputs in multitrack configuration. It has 36 specific application channels, RJ45 series communication with Modbus RTU/ASCII support and USB at 12 Mbit/s.

Pre-formed cable 40-way 0.5 m

New

Available

Industrial automation

Pre-formed cable 40-way 0.5 m

IMPO BMXFCC053

Pre-formed cable for Telefast Modicon ABE7 sub-bases, designed for I/O modules with 40-way connectors. Features a 40P connector and two HE10 connectors, with a length of 0.5 m and cable cross-section of 0.324 mm². Total of 40 wires, weight 0.21 kg. Complies with proactive RoHS EU compliance, free from toxic heavy metals and mercury.

Green flush-mounted indicator light 30.5 mm

New

Available

Industrial automation

Green flush-mounted indicator light 30.5 mm

IMPO XB5FVG3

Green flush-mounted indicator light from the Harmony XB5 range, powered at 110-120 V AC, with integrated LED and a current consumption of 14 mA. Features IP66 protection, IK03 protection rating, and resistance to vibrations up to 5 gn.

Color 4.3" Touch Screen with Ethernet Harmony STU

New

Available

Industrial automation

Color 4.3" Touch Screen with Ethernet Harmony STU

IMPO HMISTO735

4.3" color touchscreen with 480 x 272 pixels resolution, 10BASE-T/100BASE-TX Ethernet interface, compatible with Modbus TCP protocols and third parties. Supports 8999 pages, 12-24 V DC power supply, 8.1 W consumption, CE, UL and NEMA 4X/13 certified, designed for demanding industrial environments.

USB A to mini B cable 1.8 m for Modicon M340

New

Available

Industrial automation

USB A to mini B cable 1.8 m for Modicon M340

IMPO BMXXCAUSBH018

USB connection cable type A to mini B for integration with Modicon M340 CPU, compatible with XBTGT, XBTGK and XBTGTW graphics terminals. 1.8 m length, with high durability connectors and robust design for industrial environments. It complies with REACh and RoHS regulations, without SVCH or toxic heavy metals.

6-position rack frame for Modicon M340

New

Available

Industrial automation

6-position rack frame for Modicon M340

IMPO BMXXBP0600

Modicon M340 automatic platform frame with 6 X slots, compatible with BMXP34 processors, I/O modules and BMXCPS fonts. Supports expansion using XBE connector. 1.5 W consumption, IP20 protection grade, mounting with 4 M6 screws or 35 mm DIN rail clips.

20P terminal block with pre-formed 3 m cable

New

Available

Industrial automation

20P terminal block with pre-formed 3 m cable

IMPO BMXFTW301S

Pre-formed Bornero with 20 tracks and 3 m cable, compatible with Modicon X80 BMXAMO0210, BMXAMM0600 and BMXAMI0410 modules. Color-coded cables according to DIN 47100 standard. Lateral removable terminal block. Weight: 0.47 kg. Complies with proactive compliance RoHS EU, without mercury or toxic heavy metals.

20P Terminal Block with SUB-D 25 Connector, 1.5 m

New

Available

Industrial automation

20P Terminal Block with SUB-D 25 Connector, 1.5 m

IMPO BMXFCA150

Pré-formed cap for connection between sub-base and module in Modicon X80 systems, with 25 male SUB-D connector at one end and 20-way removable terminal block at the other. 1.5 m length, compatible with ABE7CPA410, ABE7CPA02 and BMXAMI0410 models.

2-channel counting module 60 kHz

New

Available

Industrial automation

2-channel counting module 60 kHz

IMPO BMXEHC0200

Modicon M340 platform counting module with 2 channels, counting capacity up to 60 kHz, input for proximity sensors 2/3 cables and incremental encoders. Push-pull outputs with 24 V DC voltage, positive/negative configurable logic. It supports counting, time and relation measurement functions, with integrated protection against overloads and short circuits.

Discrete I/O Module 16 Inputs 16 Outputs 24 V DC

New

Available

Industrial automation

Discrete I/O Module 16 Inputs 16 Outputs 24 V DC

IMPO BMXDDM3202K

Discreet I/O module of the Modicon X80 range with 16 digital inputs type current collector (24 V DC positive, 2.5 mA) and 16 outputs in solid state (24 V DC, 0.1 A). It supports proximity sensors 2/3 cables according to IEC 61131-2 type 1. Output response time: 1,2 ms.

1
2
3
…
27

Industrial automation

Industrial components: transfer switches, enclosure connectors and panel gear.

FAQ

Frequently asked questions

Industrial gear

For homes?

Aimed at industrial/commercial — not typical domestic plates.

Transferpact?

Network transfer switches — qualified installer.

Enclosures?

Panel connectors/accessories available.

Standards?

Follow sheet and local rules.

Brands?

Schneider/IMPO and others.

Product added to wishlist