New products

Showing 3529-3557 of 3557 item(s)

PP Eccentric Reducer 160/125 mm for Drainage

Out of stock

Fittings and Seals

PP Eccentric Reducer 160/125 mm for Drainage

ITAL VS0650733

Eccentric reduction of polypropylene copolymer triple layer with intermediate mineral reinforcement. Diameters from 160 to 125 mm for waste drainage at low and high temperature, ventilation and evacuation of rainwater by gravity in technical sanitation and drainage facilities.

Ver producto

PPR Reducer 110-90 mm NIRON PREMIUM Socket Welding Grey

Out of stock

Fittings and Seals

PPR Reducer 110-90 mm NIRON PREMIUM Socket Welding Grey

ITAL 27NR11090

€41.70

PPR NIRON PREMIUM reduction from 110 to 90 mm for fusion welding. Model RA7050 in grey color, designed to connect pipes of different diameter in plumbing installations, ensuring an airtight bond and compatible with standard polypropylene systems.

Ver producto

Out of stock

Fittings and Seals

PE100 transition fitting 32x1" brass

ITAL ERFM 321

€33.77

Transitional Rack SDR11 with PE100 polyethylene body and brass male threaded terminal. Nominal diameter of 32 mm and 1 inch thread. Nominal pressure of 16 bar. Compatible with the Elofit system for transporting water and chemical fluids under pressure, operating between -40 and 40 degrees Celsius.

Ver producto

Long PE100 SDR11 pipe clamp holder 110 mm 16 bar

Out of stock

Fittings and Seals

Long PE100 SDR11 pipe clamp holder 110 mm 16 bar

ITAL ECRT 110

€18.60

Long polyethylene PE100 SDR11 holder with nominal diameter of 110 mm and pressure of 16 bar. It belongs to the Elofit system and complies with the UNE-EN ISO 12201 standard. Suitable for drinking water, brackish, sea, waste and chemical fluids, operating between -40 and 40 degrees Celsius in pressure installations.

Ver producto

Out of stock

Fittings and Seals

PE100 Electrofusion Sleeve 110 mm SDR11

ITAL EME 110

€18.44

Electrosoldable PE100 polyethylene sleeve with nominal diameter of 110 mm and SDR11 ratio. Designed for a rated pressure of 16 bar, this accessory guarantees a hermetic bond by electrofusion. It belongs to the Elofit system, certified according to the UNE-EN ISO 12201 standard, and is suitable for the transport of drinking water, brackish water, waste...

Ver producto

Out of stock

Fittings and Seals

PPR 75mm Socket Welding Sleeve Grey

ITAL 27NMAN75

€11.86

NIRON PREMIUM 75 mm sleeve made of polypropylene PPR. It incorporates type A matrix and weld socket connection. Grey finish, reference RA7050. Designed for watertight connections in plumbing facilities with polypropylene pipes, guaranteeing hydraulic integrity in domestic or industrial applications.

Ver producto

Out of stock

Fittings and Seals

PPR 110 mm Sleeve Type A Matrix Grey

ITAL 27NMAN110

€33.24

NIRON PAUL PREMIUM RA7050 110 mm in polypropylene PPR. Type A matrix for socket welding, grey color. Designed for watertight connections in hot and cold water installations, ensuring structural integrity and compatibility with standard pipes.

Ver producto

PPR Union Joint 63 mm Thread H ISO BSP 2 inches

Out of stock

Fittings and Seals

PPR Union Joint 63 mm Thread H ISO BSP 2 inches

ITAL 27NRFF632L

€86.42

Link NIRON PREMIUM RA7050 for 63 mm PPR systems with 2-inch H ISO BSP thread. Made of polypropylene and standard brass, it allows the secure connection between welded and threaded tubes in fluid installations.

Ver producto

PE100 female transition fitting brass 75 mm 16 bar

Out of stock

Fittings and Seals

PE100 female transition fitting brass 75 mm 16 bar

ITAL ERFF 75212

€135.02

SDR11 transition rack with straight end threaded female in brass, made of high density PE100 polyethylene. It has a nominal diameter of 75 mm and a working pressure of 16 bar, complying with the UNE-EN ISO 12201 standard.

Ver producto

90 Degree Weldable Elbow PE100 110 mm SDR11

Out of stock

Fittings and Seals

90 Degree Weldable Elbow PE100 110 mm SDR11

ITAL EGEM 110

€56.87

90 degree electrosoldable elbow made of PE100 polyethylene with a nominal diameter of 110 mm. It has an SDR11 ratio and supports nominal pressure of 16 bar. Designed for Elofit systems, it allows watertight connections by electrofusion in water and chemical fluid transport facilities under variable pressure and temperature conditions.

Ver producto

Full bore ball valve 2" stainless steel AISI 316

Out of stock

Faucets area and stopcocks

Full bore ball valve 2" stainless steel AISI 316

GEN 2014 09

€193.22

Full 2-piece dial valve with nominal diameter of 2 inches and ISO 7-1 threaded ends. Made of AISI 316 stainless steel, it incorporates PTFE seats with fiberglass and unexpulsable stem. It supports pressures up to 63 bar and temperatures between -25 and 180 degrees Celsius, ensuring tightness in demanding industrial applications.

Ver producto

Full bore ball valve 1/2" stainless steel AISI 316

Out of stock

Faucets area and stopcocks

Full bore ball valve 1/2" stainless steel AISI 316

GEN 2014 04

€31.62

Full two-piece dial valve in AISI 316 stainless steel. Extremos threaded according to ISO 7-1. PTFE seats with 15% fiberglass. Maximum working pressure of 63 bar and temperature range between -25 and 180 degrees Celsius.

Ver producto

Full bore ball valve 3/4" PN25 chrome-plated brass

Out of stock

Faucets area and stopcocks

Full bore ball valve 3/4" PN25 chrome-plated brass

GEN 3033 05

€18.67

Full pass sphere valve PN25 made of chromed brass according to UNE-EN 12165. It incorporates PTFE joints and ends with 3/4" male-male BSP gas thread. It supports maximum temperatures of 150oC and has manual control by steel lever.

Ver producto

Out of stock

Faucets area and stopcocks

Brass square safety valve 1/2" 6 bar

GEN 3189 04

€11.48

Safety valve brass square with AISI 302 spring and female-female threads ISO 228/1 1/2". Adjustment pressure 6 bar, maximum 10 bar and temperature up to 90oC. Includes shutter and EPDM membrane for effective sealing in hydraulic systems.

Ver producto

Heavy duty ball valve 1 1/4" PN40 full port brass chrome plated

Out of stock

Faucets area and stopcocks

Heavy duty ball valve 1 1/4" PN40 full port brass chrome plated

GEN 3021 07

€48.64

1 1/4" heavy series sphere valve with nominal pressure PN-40 and total step. Made of brass according to UNE-EN 12165 with chrome finish. It incorporates PTFE joints and ends with gas thread BSP H-H according to ISO 228/1. It supports maximum temperatures of 150oC.

Ver producto

Out of stock

Shower and Bathtub Faucets

Ge Class Chrome Brass Shower Thermostat

GEN 67104 14 45 67

€272.00

Ge Class shower thermostat with brass body and flowers according to UNE-EN 1982. Incorporates thermostatic cartridge anti-silent scalding and chromed ABS flyers. It works with a minimum flow rate of 12 litres/minute to 3 bar and can withstand pressures of up to 10 bar, ensuring thermal stability in residential or commercial installations through its...

Ver producto

Female Quick Coupler Full Step 1/2" Forged Brass

Out of stock

Fittings and Seals

Female Quick Coupler Full Step 1/2" Forged Brass

GEN 0037 04

€11.00

Rack T female total 1/2" pass for PE20 pipes, made of forged brass according to UNE-EN 12165. It supports 16 bar and temperatures from -10 to 90 degrees. It incorporates ISO 228/1 female BSP thread and Genebre Rac-Ge tightening system for watertight connections in low, medium and high density polyethylene.

Ver producto

Female T fitting full bore 1 1/4" PE40 forged brass

Out of stock

Fittings and Seals

Female T fitting full bore 1 1/4" PE40 forged brass

GEN 0037 07

€44.27

Racor T female pass total of 1 1/4" for PE40 pipes. Made of forged brass according to UNE-EN 12165, it supports 16 bar. End threaded female BSP according to ISO 228/1. Genebre Rac-Ge connection system with tight rings and chromed brass stopper for watertight unions.

Ver producto

Oval Chrome Shower Support for Faucet Mounting

Out of stock

Shower Hoses and Handheld Showers

Oval Chrome Shower Support for Faucet Mounting

GEN 100068 45

€10.68

Oval shower holder with chrome finish, designed for safe fixation of taps. Its robust structure ensures a stable and durable installation in the bathroom, offering a functional solution for the assembly of shower accessories.

Ver producto

Forged brass straight coupling fitting 16 bar

Out of stock

Fittings and Seals

Forged brass straight coupling fitting 16 bar

GEN 0022 07

€29.92

Straight coupling for PE40 pipe with total step and maximum working pressure of 16 bar. Made of forged brass according to UNE-EN 12165, it incorporates Genebre Rac-Ge tightening system with chromed rings. Operating temperature range from -10oC to 90oC, suitable for low, medium and high density polyethylene.

Ver producto

Out of stock

Kitchen taps

Single-lever basin K8 shower chrome

GEN 61205 28 45 66

€209.00

Single K8 sink with removable shower and HZ pipe. Chrome finish and unified flow control. Designed for standard installation in kitchens, it offers practical functionality and durability in the daily use of the washing area.

Ver producto

Out of stock

Kitchen taps

Single-lever sink mixer K8 chrome brass

GEN 61196 28 45 66

€154.96

Monomand for the K8 series sink with high pipe. Made of brass according to UNE-EN 1982 and Zamak handle. It incorporates 40 mm ceramic cartridge with directed output and anti-calal aerator M24x1. It works with pressures between 0.5 and 10 bar, supporting maximum temperatures of 85 °C for efficient and durable domestic use.

Ver producto

53 mm Pressure Gauge 0-6 bar 1/4" Quick Connector Bottom Outlet

Out of stock

Pressure gauges

53 mm Pressure Gauge 0-6 bar 1/4" Quick Connector Bottom Outlet

GEN 3820 006

€9.55

53 mm gauge with Bourdon tube mechanism and ABS box. Includes brass tailing according to the UNE-EN 12165 standard, with 1/4" metric thread for gas. Its measuring range ranges from 0 to 6 bar, while the lower radial output allows a versatile installation in different pressure systems.

Ver producto

Double wave elastic sleeve 1" EPDM galvanized fittings

Out of stock

Fittings and Seals

Double wave elastic sleeve 1" EPDM galvanized fittings

GEN 2830 06

€36.70

1-inch double-wave elastic sleeve made of EPDM with galvanized gas thread fittings. It supports a maximum working pressure of 10 kg/cm2 and operates between -10oC and +105oC. Its total length of 200 mm allows flexible connections in fluid systems, absorbing vibrations and compensating deviations in the pipe.

Ver producto

Out of stock

Shower Hoses and Handheld Showers

Style Shower T5 5-jet shower handle

GEN DXT5 45

€40.38

Style Shower T5 shower handle with five jets to vary water flow. It weighs 0.242 kg, facilitating its handling and installation. Its technical design ensures efficient flow distribution, integrating precisely into contemporary shower systems and offering a versatile and functional bathroom experience.

Ver producto

Stud 1/2" stainless steel 316 microfusion

Out of stock

Fittings and Seals

Stud 1/2" stainless steel 316 microfusion

GEN 0280 04

€5.17

1/2" male made of 316 stainless steel by microfusion. It meets ISO 7-1 and ISO 4144 standards for threads and dimensions. It supports maximum pressure of 20 bar and temperatures between -20°C and 220°C, ensuring durability in demanding industrial applications.

Ver producto

Out of stock

Faucets area and stopcocks

Brass extension kit for recessed valves

GEN K3052P

€4.01

Extension kit for recessed valves made of brass according to UNE-EN 12165 standard. Includes fastening screw for safe mounting. Designed to extend valve connection in plumbing facilities, ensuring compatibility and durability in hot and cold water systems.

Ver producto

Y-type strainer filter 2.1/2" brass gas thread H-H

Out of stock

Fittings and Seals

Y-type strainer filter 2.1/2" brass gas thread H-H

GEN 3302 10

€151.46

2.1/2" Y-type filter with H-H gas screw ends according to ISO 228/1. Body made of UNE-EN 12165 brass and AISI 304 stainless steel sieve. It supports nominal pressure PN-16 and a maximum temperature of 140°C. Includes NBR/PTFE cap joint and 500 or 1200 micron light options for particle retention.

Ver producto

Out of stock

Faucets area and stopcocks

2-way Solenoid Valve 3/4" Brass 220V

GEN 4020 05 220V

€179.56

Two-way valve with nominal diameter of 3/4" and indirect drive. It works with a voltage of 220V for precise fluid control. The body is made of brass according to UNE-EN 12165, while the control pilot uses stainless steel to ensure durability and resistance in industrial or domestic applications.

Ver producto

Inicios