New products

Showing 2989-3024 of 3306 item(s)

Triple PE20xPE20 Brass PN16 Coupling Adapter

Available

Fittings and Seals

Triple PE20xPE20 Brass PN16 Coupling Adapter

GEN 0032 04

Triple T-racor PE20xPE20 coupling made of forged brass according to UNE-EN 12165. It supports maximum pressure of 16 bar (PN16) and temperatures between -10oC and 90oC. It incorporates Genebre Rac-Ge tightening system with chromed brass rings for a secure connection in polyethylene pipes.

Male straight fitting 1"x32 mm brass PN16

Available

Fittings and Seals

Male straight fitting 1"x32 mm brass PN16

GEN 0017 06

€12.31

1"x32 mm straight male tail made of brass forged according to UNE-EN 12165. It incorporates BSP male threaded end ISO 7/1 and Genebre Rac-Ge tightening system. Nominal pressure PN16, operating between -10oC and 90oC, suitable for low, medium and high density polyethylene pipes.

Available

Fittings and Seals

Forged Brass Straight Male BSP 1/2

GEN 0017 04

€5.05

Straight ram for forged brass with threaded BSP 1/2"x20 according to ISO 7/1. It supports maximum pressure of 16 bar (PN16) and temperatures between -10oC and 90oC. Compatible with low-, medium- and high-density polyethylene pipes by means of a specific tightening system for seamless assembly.

Forged brass straight male connector 1.1/4" PE40

Available

Fittings and Seals

Forged brass straight male connector 1.1/4" PE40

GEN 0017 07

€19.86

Straight ram for PE40 pipe connection for forged brass. It presents total step of 1.1/4" and maximum working pressure of 16 bar (PN-16). The threaded end follows ISO 7/1 BSP standard. It uses Genebre Rac-Ge tightening system with ring and stopper in chromed brass.

Available

Fittings and Seals

Female straight 3 inch forged brass BSP

GEN 0012 11

€107.86

3-inch straight female tailing for PE90 pipe, made of forged brass according to UNE-EN 12165 standard. It incorporates BSP female ISO 228/1 threaded and supports PN16 pressures. Includes M10 stainless steel screws and toothed washer. Operating thermal range from -10 to 90 degrees Celsius, compatible with low, medium and high density polyethylene.

Straight female connector 1" x PE32 forged brass

Available

Fittings and Seals

Straight female connector 1" x PE32 forged brass

GEN 0012 06

€12.50

Female straight tail 1" x PE32 made of brass forged according to UNE-EN 12165. It incorporates BSP female ISO 228/1 thread and Genebre Rac-Ge tightening system. Nominal pressure PN16, operating between -10oC and 90oC for polyethylene pipes.

Forged Brass Female Straight Adapter 1/2" x PE20

Available

Fittings and Seals

Forged Brass Female Straight Adapter 1/2" x PE20

GEN 0012 04

€5.32

UNE-EN 12165 for PE20 pipes. Scratch BSP female ISO 228/1, pressure PN16 and thermal range from -10 to 90 degrees. Genebre Rac-Ge tightening system that ensures watertightness in hydraulic fluid installations.

Male straight connector 50 x 1.1/2" forged brass

Available

Fittings and Seals

Male straight connector 50 x 1.1/2" forged brass

GEN 0017 08

€29.08

Straight forged brass tail for PE50 pipe with threaded BSP 1.1/2" according to ISO 7/1. It supports 16 bar and temperatures from -10 to 90oC. It incorporates Genebre Rac-Ge tightening system for a secure and durable connection in polyethylene installations under moderate pressure.

Male straight adapter 2" x PE63 forged brass

Available

Fittings and Seals

Male straight adapter 2" x PE63 forged brass

GEN 0017 09

€49.88

2" x PE63 straight male tail made of brass forged according to UNE-EN 12165. It supports a maximum working pressure of 16 bar (PN-16) and temperatures between -10oC and 90oC. Designed for the safe connection of polyethylene pipes by means of a tightening system that guarantees watertightness and mechanical resistance at the point of binding.

Female straight fitting 1"1/2 PE50 forged brass

Available

Fittings and Seals

Female straight fitting 1"1/2 PE50 forged brass

GEN 0012 08

€29.32

1"1/2" female straight rack for PE50 pipes, made of forged brass according to UNE-EN 12165. It incorporates BSP female ISO 228/1 thread and Genebre Rac-Ge tightening system. It supports maximum pressures of 16 bar and temperatures between -10oC and 90oC, guaranteeing tightness in low, medium and high density polyethylene installations.

Wall penetration fitting 1/2" stainless steel 316

Available

Fittings and Seals

Wall penetration fitting 1/2" stainless steel 316

GEN 0285 04

€33.63

Rack 1/2" rail made of 316 Microfusion stainless steel. It complies with ISO 228/1 in its threads. It supports a maximum working pressure of 20 bar (S-150) and works effectively in a temperature range ranging from -20oC to 220oC, ensuring durability in demanding industrial applications.

Female Wall Fitting L 1/2" x PE20 Brass PN16

Available

Fittings and Seals

Female Wall Fitting L 1/2" x PE20 Brass PN16

GEN 0049 04

€9.43

Rack L female wall for PE20 pipes, made of brass forged according to UNE-EN 12165. It incorporates gas thread BSP female ISO 228/1 and Genebre Rac-Ge tightening system. It supports pressures up to 16 bar (PN-16) and temperatures between -10 and 90 degrees, ensuring a secure and stable connection in fluid installations.

Straight coupling fitting PE75xPE75 PN16 forged brass

Available

Fittings and Seals

Straight coupling fitting PE75xPE75 PN16 forged brass

GEN 0022 10

€190.25

Straight coupling rack PE75xPE75 made of forged brass according to UNE-EN 12165. It supports pressure PN16 and temperatures from -10 to 90 °C. Includes M10x30 stainless steel screws and symmetrical tightening rings that allow flexible mounting at any installation position.

Five-way brass gas thread fitting M-H ISO 228/1

Available

Fittings and Seals

Five-way brass gas thread fitting M-H ISO 228/1

GEN 3772 06 06

€17.90

Five-way rack made of UNE-EN 12165 brass, designed for pump coupling in thermal fluid systems. It has a total length of 81 mm and ends with gas thread M-H in accordance with ISO 228/1.

Two-piece 3/4x1/2 inch water meter adapter

Available

Fittings and Seals

Two-piece 3/4x1/2 inch water meter adapter

GEN 6040 04

€7.18

Two-piece rack with dimensions 3/4x1/2 inches, designed for installation of water meters. It incorporates sealing gasket that prevents leaks and ensures a secure connection between pipes of different diameters in residential or commercial hydraulic systems, facilitating assembly and technical maintenance.

2-piece 1 1/4x1 inch water meter adapter

Available

Fittings and Seals

2-piece 1 1/4x1 inch water meter adapter

GEN 6040 06

€19.93

Rack of two pieces with measures of 1 1/4 x 1 inch, intended for the installation of water meters. It incorporates watertight seal joint for airtight sealing, preventing leaks and ensuring the integrity of the connection in residential or commercial hydraulic systems.

Single-lever medium-high basin mixer K8 chrome

Available

Taps, washbasin and bidet

Single-lever medium-high basin mixer K8 chrome

GEN 60134 28 45 66

€97.01

K8 medium high washbasin with chrome finish. Designed for washbasins and bidets, it allows control of flow and temperature by a single handle. Its surface facilitates cleaning and offers corrosion resistance in residential or commercial facilities.

K8 Plus single-lever basin mixer chrome finish

Available

Taps, washbasin and bidet

K8 Plus single-lever basin mixer chrome finish

GEN 61130 28 45 66

€99.75

K8 Plus washbasin monomand with chrome finish. Control the flow and temperature using a single handle. Its technical design facilitates integration into bathroom spaces, optimizing operational functionality and maintaining the aesthetic coherence of the K8 Plus series.

Available

Shower and Bathtub Faucets

K8 bathroom single tap surface mount

GEN 60100 28 45 66

€150.00

Model K8 bathroom single-command for unified flow and temperature control using a single control. Includes complete installation kit intended for surface mounting. Its structure is designed for humid environments, meeting the technical standards of residential and commercial plumbing.

Single-lever basin mixer 3-way brass cartridge 40mm

Available

Kitchen taps

Single-lever basin mixer 3-way brass cartridge 40mm

GEN 65702 18 45 66

€373.99

Single-way three-way sink for shelf installation, made of brass according to UNE-EN 1982. It incorporates 40 mm ceramic cartridge and cold opening system to optimize energy consumption, allowing the independent supply of network water and filtered.

K8 single-lever sink mixer with detachable chrome shower

Available

Kitchen taps

K8 single-lever sink mixer with detachable chrome shower

GEN 61206 28 45 66

€250.99

K8 Sink Single Command with removable shower and chrome finish. Control flow and temperature by means of a single handle. Its metal structure resists corrosion, facilitating the cleaning of utensils and surfaces in domestic kitchens with efficient and constant operation.

K8 Chrome Brass Single Handle Basin Faucet 40 mm Cartridge

Available

Kitchen taps

K8 Chrome Brass Single Handle Basin Faucet 40 mm Cartridge

GEN 61200 28 45 66

€107.12

K8 sink monomand made of brass according to UNE-EN 1982, with chrome finish EN 248. It incorporates 40 mm ceramic cartridge and M24x1 anti-cal aerator. It supports pressures from 0.5 to 10 bar and temperatures up to 85 °C, ensuring durability and stable technical performance in domestic or professional facilities.

Single-lever bathroom/shower complete kit chrome

Available

Shower and Bathtub Faucets

Single-lever bathroom/shower complete kit chrome

GEN 64100 16 45 66

€264.99

Single bathroom and shower with brass body according to UNE-EN 1982 and 40 mm ceramic cartridge. Includes complete kit with 170 cm flexo, handle and eccentric. Operates with pressure from 0.5 to 10 bar and minimum flow rate of 20 liters per minute, ensuring a constant and efficient flow in residential facilities.

Available

Pressure gauges

Rear outlet gauge 53 mm sphere 0-4 bar

GEN 3818 004

€10.58

Rear output gauge with dial of 53 mm, precision class 2.5 and range from 0 to 4 bar. Designed for panel installation, it offers stable pressure reading in industrial systems with flexible connection.

53 mm Pressure Gauge NPT 1/4" 0-10 bar Bottom Outlet

Available

Pressure gauges

53 mm Pressure Gauge NPT 1/4" 0-10 bar Bottom Outlet

GEN 3820N 010

€9.76

53 mm gauge with NPT 1/4" thread and lower output. It incorporates ABS box, Bourdon tube and brass tailtail according to DIN 17660 standard. Measuring range from 0 to 10 bar for industrial applications.

Radial pressure gauge 0-6 bar 53 mm 1/4 thread

Available

Pressure gauges

Radial pressure gauge 0-6 bar 53 mm 1/4 thread

GEN 3819 006

€10.20

Radial gauge 53 mm with range from 0 to 6 bar, designed for gas systems. It incorporates ABS box, Bourdon tube and brass tailing with thread 1/4" M according to UNE-EN 12165 standard.

Radial pressure gauge 0-6 bar 63 mm red indicator

Available

Pressure gauges

Radial pressure gauge 0-6 bar 63 mm red indicator

GEN 3825 006

€10.42

Radial gauge of 63 mm with range from 0 to 6 bar and precision class 2.5. It incorporates Bourdon tube and brass tail according to UNE-EN 12165 standard. ABS housing and lower output facilitate installation in fluid systems, offering reliable and compact measurement for specific industrial or technical applications.

Radial pressure gauge 0-10 bar 63 mm red indicator

Available

Pressure gauges

Radial pressure gauge 0-10 bar 63 mm red indicator

GEN 3825 010

€10.42

Radial gauge of 63 mm with scale from 0 to 10 bar and red indicator. It incorporates ABS box, Bourdon tube and brass tailtail according to UNE-EN 12165. It features 1/4" thread and 2.5" precision class, designed for mounting with lower output.

Pressure gauge 63 mm stainless steel glycerin

Available

Pressure gauges

Pressure gauge 63 mm stainless steel glycerin

GEN 3829 006

€24.65

Pressure gauge with rear connection BSP G 1/4" and diameter of 63 mm. Made of AISI 304 stainless steel, it incorporates glycerine fluid for vibration damping. Its Bourdon tube mechanism complies with the UNE-EN 12165 standard, while the set conforms to EN 837-1.

Available

Pressure gauges

Pressure Gauge 0-10 bar G1/4" AISI 304

GEN 3829 010

€24.65

Pressure gauge with rear connection BSP G 1/4" and stainless steel case AISI 304. Includes needle cushioning glycerin and polycarbonate visor. Scale from 0 to 10 bar with brass Bourdon tube. It complies with EN 837-1 and ASME B40.1-1991 standards for precise industrial measurement.

63 mm Pressure Gauge 0-6 bar M-1/4" Stainless Steel

Available

Pressure gauges

63 mm Pressure Gauge 0-6 bar M-1/4" Stainless Steel

GEN 3822 006

€23.43

63 mm gauge with range from 0 to 6 bar, designed for gas systems. It incorporates Bourdon tube, AISI 304 stainless steel housing and brass tailing according to the UNE-EN 12165 standard. Its radial lower outlet and glycerine filling facilitate installation and protect the internal mechanism from vibrations.

53 mm Pressure Gauge 0-10 bar 1/4" Quick Connector Bottom Outlet

Available

Pressure gauges

53 mm Pressure Gauge 0-10 bar 1/4" Quick Connector Bottom Outlet

GEN 3820 010

€9.55

53 mm gauge with ABS box and Bourdon tube mechanism. Includes brass groove according to UNE-EN 12165 and 1/4" metric thread. Its measuring range ranges from 0 to 10 bar, while the lower radial output allows a flexible installation in gas systems.

Smooth Female-to-Female Sleeve 1/2" Stainless Steel 316

Available

Fittings and Seals

Smooth Female-to-Female Sleeve 1/2" Stainless Steel 316

GEN 0270 04

€5.48

A 1/2" female-female smooth sleeve made of 316 Microfusion stainless steel. It meets ISO 7-1 and ISO 4144 standards, with maximum working pressure of 20 bar and operating temperature range between -20oC and 220oC.

Smooth Female-to-Female Sleeve 1.1/2" Stainless Steel 316

Available

Fittings and Seals

Smooth Female-to-Female Sleeve 1.1/2" Stainless Steel 316

GEN 0270 08

€18.63

Straight female-female sleeve 1.1/2" made of 316 stainless steel using Microfusion technology. It meets ISO 7-1 and ISO 4144 standards. It supports maximum pressures of 20 bar and temperatures between -20°C and 220°C, ensuring durability in demanding industrial applications.

Smooth female-to-female ferrule 1" stainless steel 316

Available

Fittings and Seals

Smooth female-to-female ferrule 1" stainless steel 316

GEN 0270 06

€10.16

1" female-female smooth sleeve made of 316 stainless steel by microfusion. It meets ISO 7-1 and ISO 4144 standards. It supports pressures up to 20 bar and temperatures between -20oC and 220oC, ensuring durability in demanding industrial systems.

Double corrugated elastic sleeve 2" EPDM with galvanized fittings

Available

Fittings and Seals

Double corrugated elastic sleeve 2" EPDM with galvanized fittings

GEN 2830 09

€67.66

2-inch double-wave elastic sleeve made of EPDM, equipped with galvanized gas thread fittings. It supports a maximum working pressure of 10 kg/cm2 and operates in a temperature range between -10oC and +105oC, with a total length of 200 mm for flexible connections.

Inicios