New products

Showing 1417-1428 of 1776 item(s)

Ratchet wrench set 72 teeth 1/2 inch 22 pieces

Available

Ratchet Wrenches

Ratchet wrench set 72 teeth 1/2 inch 22 pieces

EDM 19151

22-piece 1/2-inch set including a 72-tooth ratchet wrench, 17 metric hex sockets from 8 to 32 mm, two extensions of 127 and 250 mm, a universal joint, and a sliding T-handle.

Compact 39 cm polyester tool basket 1200 deniers

Last units

Toolboxes and Carts

Compact 39 cm polyester tool basket 1200 deniers

EDM 19127

€100.32

Compact 39 cm tool basket made of 1200 deniers polyester with rigid polypropylene base. It offers a capacity of 34 liters and supports a maximum load of 11 kg.

Last units

Toolboxes and Carts

Textile tool bag with wheels 33 l

EDM 19121

€207.62

Textile tool bag with wheels of 90 mm, made of fabric of 1200 deniers. It offers a useful capacity of 33 liters and supports up to 18 kg. It includes three transport systems, six outer pockets and a specific separator for screwdrivers, optimizing the organization of the professional equipment.

Available

Welding Wire

MIG-28 welding wire coil 0.8 mm 15 kg

EDM 16885

€102.27

Solid wire coil Mig-28 of 0.8 mm and 15 kg, coppered for carbon steel. It offers stable feed and good adhesion on light oxidation, indicated for MIG/MAG welding in structures, boiler and industrial repair works.

Rechargeable Screwdriver Kit 3.7V with 35 Accessories

Available

Drills and drivers

Rechargeable Screwdriver Kit 3.7V with 35 Accessories

EDM 08822

€31.90

Rechargeable screwdriver kit 3.7 V Li-ion 800 mAh with maximum torque of 2 Nm in electric mode and 8 Nm in manual. Speed of 250 rpm, load USB-C in 60-90 minutes. Includes 35 accessories, shaft lock, double turning sense, 1/4 inch hexagonal clamp, point magnet and working LED light.

20V Hydrocleaner Kit with 2.0Ah Battery and Charger

Available

Pressure Washers

20V Hydrocleaner Kit with 2.0Ah Battery and Charger

EDM 08499

€109.40

20 V battery water pump with working pressure of 22 bar and maximum flow rate of 220 l/h. Includes six-in-one adjustable nozzle, 400 ml detergent tank and 6 meter hose with filter.

20V Percussion Drill without Battery or Charger

Available

Drills and drivers

20V Percussion Drill without Battery or Charger

EDM 08496

€61.32

20 V drill with no battery or charger. It offers 2 speeds of 0-450 and 0-1,750 rpm, impact frequency of 0-9,000 and 0-32,400 ipm, maximum torque of 50 Nm with 19+1+1 settings. Includes 13 mm keyless screw holder, LED light, belt hook and hand strap.

3.7V Rotary Multi-Tool Kit with 51 Accessories

Available

Drills and drivers

3.7V Rotary Multi-Tool Kit with 51 Accessories

EDM 08439

€28.54

3.7V cordless rotary multi-tool with 1500 mAh battery. Offers 6 adjustable speeds between 9,000 and 20,000 rpm, digital speed indicator, and work LED light. Includes 51 accessories for cutting, sanding, and polishing, carrying case, and USB-C charging. Dimensions 160 x ø30 mm.

Brushless rotary hammer 20 V kit with 4.0 Ah battery and charger

Available

Demolition and Pneumatic Hammers

Brushless rotary hammer 20 V kit with 4.0 Ah battery and charger

EDM 08438

€175.37

20 V wireless rotary hammer with brushless motor and SDS Plus mandrel. It offers 2.7 J impact energy and 4,300 ipm. Includes 4.0 Ah Li-ion battery, 60 W charger, three drill bits, two chiselles and transport case for professional use on site.

Available

Electric Blankets and Heating Pads

Programmer remote for model 07033

EDM 02221

€11.70

Programmer command designed specifically for reference 07033. This technical device allows the configuration and programming of operating parameters on supported systems. Its application is limited to the reference indicated, ensuring direct compatibility with the specific model without the need for additional adaptations.

Available

Fittings and Seals

Lead-reinforced 4-guide WC flush valve

SOBI 034000

€42.70

Discharge valve for toilet with four guides and lead reinforcement. This mechanical component guarantees a constant and controlled water flow during the evacuation, optimizing the hydraulic performance of the sanitary system by means of its resistant and stable metal structure.

Available

Fittings and Seals

3-Piece Brass DZR Union Nut 3/4" BSPP

SOBI 081003-MH

€16.59

Three-piece bonding nut in DZR brass with polished finish. Connect 3/4" BSPP-G cylindrical threads (ISO 228-1) (DN20). Straight design for standardized hydraulic installations, allowing unmounting without cutting the pipe.

Inicios