Hardware

Showing 577-612 of 53722 item(s)

Set of 10 Wood Sanding Discs 125mm Grit 120

Available

Sanding Discs

Set of 10 Wood Sanding Discs 125mm Grit 120

ALM 3422.0752

This set contains 10 wooden sandpaper discs with a diameter of 125mm and a G120 granulometry, identified by code 63642526383. The collection includes units designed for sanding work on wood surfaces, offering a uniform consistency on each disk of the package to facilitate the maintenance and renovation of finishes in carpentry and joinery projects.

Available

Sanding Discs

Set of 10 Wood Sanding Discs 125mm G80

ALM 3422.0751

€5.88

This set contains 10 sandpaper discs for wood with diameter of 125mm and grain G80, identified by code 63642526382. The collection is designed for sanding work on wood surfaces, offering a sufficient number of pieces for multiple applications or continuous projects without needing to immediately replace the consumption material during the execution of...

Set of 10 Wood Sanding Discs 125mm Grit 50

Available

Sanding Discs

Set of 10 Wood Sanding Discs 125mm Grit 50

ALM 3422.0750

€5.88

Set of 10 sandpaper discs for wood with diameter of 125mm and G50 granulometry, identified by code 6364256377. The collection is designed for sanding work on wood surfaces, offering a sufficient number of units for continuous tasks without the need for frequent spare parts during the finishing process of the material.

Bosch GWS 20-230J 230mm 2.000W Angle Grinder

Available

Angle grinders

Bosch GWS 20-230J 230mm 2.000W Angle Grinder

ALM 3422.0135

€189.51

The 230 mm and 2,000 W BOSCH GWS 20-230J deburst offers a high start performance with a 6,500 r.p.m. engine. Its design includes protection against rearrangement, lockable switch and lower heating of the entire system to ensure excellent cutting results.

Aluminum extendable handle saw 2.5m model FLO

Aluminum extendable handle saw 2.5m model FLO 2

Available

Saws, saws and guides

Aluminum extendable handle saw 2.5m model FLO

ALM 3404.0057

€32.63

SERRUCHO WITH RELEVANT EXTENSIBLE ALUMINIUM 2.5mt model 99321 FLO features adjustable telescopic handle from 160 to 250 cm. The 35 cm blade is made of SK5 steel with high carbon content and hardness of 63-67 HRC.

Folding Saw with Extendable Aluminum Handle 1.6m Blade 35cm SK5 Steel

Folding Saw with Extendable Aluminum Handle 1.6m Blade 35cm SK5 Steel 2

Available

Saws, saws and guides

Folding Saw with Extendable Aluminum Handle 1.6m Blade 35cm SK5 Steel

ALM 3404.0055

€29.40

SERVICE WITH EXTENSIBLE ALUMINIUM RELEVANT 1.6mt model 99320 FLO features adjustable telescopic handle from 115 to 160 cm for greater versatility. Its 35 cm blade is made of SK5 steel with high carbon content and 63-67 HRC hardness, ensuring durable sharpening and wear resistance.

Available

Hand tool spare parts

625-Drop Gota Blade for Bahco Scraper

ALM 3402.0032

€27.70

The sheet 625-DROP GOTA is a replacement component specific to the Bahco brand. This accessory is designed to ensure the proper functioning of the equipment, ensuring that the tool maintains its structural integrity and operational efficiency during its use in industrial or specialized maintenance applications.

Available

Hand tool spare parts

Round blade 625 for scraper Bahco

ALM 3402.0030

€27.70

Leaf 625-ROUND ROUNDDA is a cutting accessory specifically designed for rasquets of the Bahco brand. This model features circular geometry at its working end, optimized for circular saw applications where a rounded profile is required.

Nickel-plated Zamak keychain with carabiner, 76 mm

Available

Carabiners

Nickel-plated Zamak keychain with carabiner, 76 mm

ALM 3397.0125

€1.96

This carabiner keychain is made of zamak and has a nickel finish to ensure durability. Its total measurement is 76 mm, offering a robust structure suitable for the secure fixation of keys and accessories in everyday applications requiring basic mechanical resistance.

Flat Carabiner Quick-Release Nickel 90mm

Available

Carabiners

Flat Carabiner Quick-Release Nickel 90mm

ALM 3397.0121

€1.74

This is a flat tourniquet carabiner with nickel finish and a measure of 90mm. The flat design facilitates its handling and storage in reduced spaces. Its nickel construction offers corrosion resistance and guarantees durability in demanding industrial or rescue working conditions.

Available

Fasteners

Bag 100 Wire Tie R 4mm

ALM 3397.0074

€17.62

Bag of 100 round wire pins of 4mm. Unit pack for fastening work with circular wire. Includes 100 R 4mm wire pin units.

Last units

Rings

Bag 100 keyring rings 35mm model 8571535

ALM 3397.0033

€39.34

Keyring bag with 100 units, model 8571535, designed for massive key distribution. It has a 35mm diameter ring to ensure a safe and efficient closure in access control systems.

Available

Rings

Bag 100 keyring rings 25mm model 8571525

ALM 3397.0031

€10.54

Keyring bag model 8571525 with measurement of 25mm and capacity for 100 units. Product designed for compact storage of keys or small objects, presenting a robust structure suitable for use in security organization systems or access control using standard rings.

Bag of 100 keyring rings 20mm model 8571520

Available

Hardware rings

Bag of 100 keyring rings 20mm model 8571520

ALM 3397.0030

€8.74

Key ring bag model 8571520 with measures of 20mm on top, designed for the transport and organization of keys. This accessory has a robust construction that allows the secure fixation by means of a standard ring mechanism, facilitating its daily use without compromising the integrity of the assembly.

Bag 100 nylon hooks diameter 16mm ref 0211600

Available

Rings

Bag 100 nylon hooks diameter 16mm ref 0211600

ALM 3397.0020

€2.87

The Bag 100 Nylon Rings 16mm model 0211600 contains a batch of one hundred rings made of nylon material. Each piece has a nominal diameter of 16 millimeters and is designed for industrial applications or mechanical fastening that require strength and durability in demanding operating environments.

Powerplus POWX1384 Electric Soldering Iron 60W Straight Tip with Stand

Powerplus POWX1384 Electric Soldering Iron 60W Straight Tip with Stand 2

Available

Soldering Irons

Powerplus POWX1384 Electric Soldering Iron 60W Straight Tip with Stand

ALM 3385.1413

€14.17

The 60W Powerplus POWX1384 electric welder features a straight tip and a soft non-slip handle, designed for small welding projects such as circuit plate repair or model construction, including practical support included.

200W Rotary Multi-Tool 126 Accessories POWX1326/1341 Powerplus

200W Rotary Multi-Tool 126 Accessories POWX1326/1341 Powerplus 2

Last units

Electric saws

200W Rotary Multi-Tool 126 Accessories POWX1326/1341 Powerplus

ALM 3385.0079

€77.60

PowerPlus’s POWX1326/1341 rotary multi-tool features 200W power and achieves rotation speeds between 10000 and 40000 min-1. Its clamp has a diameter of 3.2 mm and is equipped with a power cable of 3 meters in length.

Bag 8 Tensioners Clip Plastic For Awning 85172 Vorel

Available

Tensioners

Bag 8 Tensioners Clip Plastic For Awning 85172 Vorel

ALM 3384.3292

1 Reviews

€5.38

The 8 Tensors Plastic Clamp Bag 85172 Vorel is an assembly tensioner designed for the support of canvases. Made of nylon, it has dimensions of 82 x 25 mm.

25m Roll Electro-welded Mesh 50x50x2.0mm 100cm

25m Roll Electro-welded Mesh 50x50x2.0mm 100cm 2

Last units

Mesh and Trellises

25m Roll Electro-welded Mesh 50x50x2.0mm 100cm

ALM 3384.0150

€72.20

An electro-welded mesh roll of 25 meters in length is offered with a width of 100 centimeters. The structure has a regular grid of 50x50 millimetres and the wire has a thickness of 2.0 millimetres, ensuring the mechanical strength necessary for its installation in containment or perimeter safety projects.

50m Triple Twist Coiled Fence 51x0.8mm 100cm

50m Triple Twist Coiled Fence 51x0.8mm 100cm 2

Available

Mesh and Trellises

50m Triple Twist Coiled Fence 51x0.8mm 100cm

ALM 3384.0038

€33.95

It is a roll of triple torsion mesh with a total length of 50 meters and a width of 100 centimeters. The construction of the material has a wire configuration of 51 millimetres of external diameter combined with a thickness of 0.8 millimetres per yarn.

Porcelain drill bit 8 mm dry model 1229 HEPYC

Last units

Drills

Porcelain drill bit 8 mm dry model 1229 HEPYC

ALM 3382.0593

€7.89

1229 HEPYC dry porcelain broca 8 mm in diameter. Designed to perforate ceramic surfaces without water, it ensures precision through its optimized geometry for hard materials such as porcelain, avoiding breakage during manual or electrical drilling.

HEPYC model 1229 5mm dry porcelain drill bit

Available

Drills

HEPYC model 1229 5mm dry porcelain drill bit

ALM 3382.0591

€5.99

This is the 5mm dry porcelain drill bit model 1229 of the HEPYC brand. Designed specifically for drilling ceramics and hard materials without water, it guarantees precision and durability in masonry and plumbing work where a clean and efficient finish is required on resistant surfaces.

HEPYC Model 1229 4mm Dry Masonry Drill Bit for Porcelain

Available

Drills

HEPYC Model 1229 4mm Dry Masonry Drill Bit for Porcelain

ALM 3382.0590

€5.66

The model 1229 HEPYC porcelain drill is designed to drill dry hard ceramic surfaces. It has an exact diameter of 4 millimetres, ensuring precision and efficiency in masonry applications without the need for water for the cooling of the drill during operation.

Forged straight tread model 25601 Flores Cuts 310x130mm

Available

Rakes and Hoes

Forged straight tread model 25601 Flores Cuts 310x130mm

ALM 3381.0193

€13.99

La Raedera Forjada Recta 25601 of the Flores Cortes brand has dimensions of 310x130mm. This straight forged element is designed for specific industrial applications that require robustness and precision in their geometry, offering a technical solution based on their standard measurements.

Forged Flange 160x260mm Flores Cortes Sheet Metal Cuts 2mm

Available

Rakes and Hoes

Forged Flange 160x260mm Flores Cortes Sheet Metal Cuts 2mm

ALM 3381.0190

€11.72

The FORJED WEIGHT 160x260mm model 25501 of the FLORES CORTES brand is a structural element made of 2mm sheet. Its specific measurements are 260x155x240mm, designed for applications that require robustness and dimensional accuracy according to the manufacturer's specifications.

Set of 3 Step Drill Bits HSS 4-12, 4-20 and 4-32 mm STHOR

Available

Drills

Set of 3 Step Drill Bits HSS 4-12, 4-20 and 4-32 mm STHOR

ALM 3380.0356

€15.72

The 3 STHOR staggered drill bits set model 22616 allows precise drills to be performed on metal plates with variable diameters. This set includes three high-quality TiN coated tools, covering ranges of 4-12 mm, 4-20 mm and 4-32 mm to determine the exact diameter of the hole with great precision in industrial drilling work.

Available

Drills

Step Drill Bit HSS 4-32mm 8 22612 STHOR

ALM 3380.0353

€9.37

The HSS scaled drill bit model 8 22612 of the brand STHOR is a cutting tool designed for drilling in metals. Made of fast steel, it has a step design that allows multiple hole diameters between 4 and 32 mm with a single tool, optimizing performance and reducing the times of changing accessories during industrial or workshop tasks.

Available

Staplers

Stanley Type A Stapler 6-10mm 6-TR45

ALM 3373.0110

€19.12

The 6-TR45 A Stanley stapler is a tool for fast insertion of staples with anti-pinch handle and fastening ring. Compatible with 6, 8 and 10 mm staples, optimizes time savings in industrial or domestic fastening tasks without the need to invent additional technical specifications not present in the original information provided by the manufacturer Stanley...

26-Piece Screwdriver Set PH/PZ/PL/TO Cushion Grip Stanley FMHT83556-1

Available

Screwdrivers

26-Piece Screwdriver Set PH/PZ/PL/TO Cushion Grip Stanley FMHT83556-1

ALM 3373.0060

2 Reviews

€34.45

This set of 26 Stanley screwdrivers model FMHT83556-1 includes PH, PZ, PL and TO tips with CUSHION GRIP handle. The set covers various measures for general work. It is a professional Stanley brand tool designed for multiple mechanical and mounting applications in technical environments.

Stanley 5m x 19mm Bimaterial Tylon Tape Measure Model 1-30-697

Stanley 5m x 19mm Bimaterial Tylon Tape Measure Model 1-30-697 2

Available

Tape Measures/ Measuring Tapes/ Flexometers

Stanley 5m x 19mm Bimaterial Tylon Tape Measure Model 1-30-697

ALM 3373.0052

€9.53

The Stanley Model 1-30-697 tape measure is a 5-meter, 19mm wide tape with a bimaterial body. It features an extra-thick 12.7mm curved tape completely coated with Tylon polymer for enhanced durability.

80 cm Classic STHT1-43104 Stanley Rectangular Level

80 cm Classic STHT1-43104 Stanley Rectangular Level 2

Available

Levels

80 cm Classic STHT1-43104 Stanley Rectangular Level

ALM 3373.0003

€24.36

Rectangular level of 80 cm of Stanley brand, model CLASSIC STHT1-43104, designed to ensure precision in construction and levelling work. It has a magnified central bubble that offers greater visibility and durability, allowing accurate readings of +/- 0.5 mm per metre.

60 cm Classic Rectangular Level STHT1-43103 Stanley

Available

Levels

60 cm Classic Rectangular Level STHT1-43103 Stanley

ALM 3373.0002

€21.78

Rectangular level of 60 cm CLASSIC model STHT1-43103 brand STANLEY, designed to ensure precision in construction work. It has a magnified central bubble for greater visibility and durability, offering a leveling tolerance of 0.5 mm per metre.

40 cm Classic Rectangular Level STHT1-43102 Stanley

Available

Levels

40 cm Classic Rectangular Level STHT1-43102 Stanley

ALM 3373.0001

€17.92

Rectangular level of 40 cm of the brand STANLEY, model CLASSIC with reference STHT1-43102. It has magnified central bubble for greater visibility and accuracy of +/- 0.5 mm/m. Includes wider 26 mm mechanized base and large tubular bubbles.

Replaceable Soft Tooth Serration Blade 330mm 1639 Kamikaze

Available

Saws, saws and guides

Replaceable Soft Tooth Serration Blade 330mm 1639 Kamikaze

ALM 3357.0510

€14.90

Replacement blade for curved blade sawing, Kamikaze model 1639 with a total length of 330 mm. This replacement is specifically designed to restore the functionality of curved saws by means of the manual sharpening process of the tooth, allowing direct maintenance and operational continuity by replacing worn or damaged sheets in general cutting...

Replacement Turbo Hard Tooth Saw Blade 330 mm 1650 Kamikaze

Available

Saws, saws and guides

Replacement Turbo Hard Tooth Saw Blade 330 mm 1650 Kamikaze

ALM 3357.0504

1 Reviews

€14.90

Replacement blade of hard turbo tooth for curve blade saw Kamikaze Turbo, with total length of 330 mm and 1650 teeth. Designed as a specific spare part to maintain the functionality of the original equipment in cutting jobs that require high strength and precision in the curved profile characteristic of this industrial model.

POWERPLUS POWX17215 Oil-Free Compressor 6 Liters 1000W 1.5hp

POWERPLUS POWX17215 Oil-Free Compressor 6 Liters 1000W 1.5hp 2

Last units

Machines and Tools

POWERPLUS POWX17215 Oil-Free Compressor 6 Liters 1000W 1.5hp

ALM 3342.0042

€137.65

The POWX17215 oil-free compressor of the POWERPLUS brand is a 6-litre 1,000W unit with 1.5cv power. It has an air flow rate of 180l/min and a nominal pressure of 8bar, designed for applications that require clean operation without the need for oil maintenance.

1
…
16
17
18
…
1493

Product added to wishlist