Hardware

Showing 169-180 of 53724 item(s)

30L Fabric Tool Backpack with Rigid Base

Last units

Toolboxes and Carts

30L Fabric Tool Backpack with Rigid Base

EDM 19166

30 liter tool backpack made of resistant fabric with rigid waterproof polypropylene base. It supports a maximum load of 12 kg and includes high density foam backrest, adjustable padded straps and 15 inch laptop-specific compartment.

Ratchet wrench set 72 teeth 1/2 inch 22 pieces

Available

Ratchet Wrenches

Ratchet wrench set 72 teeth 1/2 inch 22 pieces

EDM 19151

€128.16

22-piece 1/2-inch set including a 72-tooth ratchet wrench, 17 metric hex sockets from 8 to 32 mm, two extensions of 127 and 250 mm, a universal joint, and a sliding T-handle.

Compact 39 cm polyester tool basket 1200 deniers

Last units

Toolboxes and Carts

Compact 39 cm polyester tool basket 1200 deniers

EDM 19127

€100.32

Compact 39 cm tool basket made of 1200 deniers polyester with rigid polypropylene base. It offers a capacity of 34 liters and supports a maximum load of 11 kg.

Last units

Toolboxes and Carts

Textile tool bag with wheels 33 l

EDM 19121

€207.62

Textile tool bag with wheels of 90 mm, made of fabric of 1200 deniers. It offers a useful capacity of 33 liters and supports up to 18 kg. It includes three transport systems, six outer pockets and a specific separator for screwdrivers, optimizing the organization of the professional equipment.

Available

Welding Wire

MIG-28 welding wire coil 0.8 mm 15 kg

EDM 16885

€102.27

Solid wire coil Mig-28 of 0.8 mm and 15 kg, coppered for carbon steel. It offers stable feed and good adhesion on light oxidation, indicated for MIG/MAG welding in structures, boiler and industrial repair works.

Rechargeable Screwdriver Kit 3.7V with 35 Accessories

Available

Drills and drivers

Rechargeable Screwdriver Kit 3.7V with 35 Accessories

EDM 08822

€31.90

Rechargeable screwdriver kit 3.7 V Li-ion 800 mAh with maximum torque of 2 Nm in electric mode and 8 Nm in manual. Speed of 250 rpm, load USB-C in 60-90 minutes. Includes 35 accessories, shaft lock, double turning sense, 1/4 inch hexagonal clamp, point magnet and working LED light.

20V Hydrocleaner Kit with 2.0Ah Battery and Charger

Available

Pressure Washers

20V Hydrocleaner Kit with 2.0Ah Battery and Charger

EDM 08499

€109.40

20 V battery water pump with working pressure of 22 bar and maximum flow rate of 220 l/h. Includes six-in-one adjustable nozzle, 400 ml detergent tank and 6 meter hose with filter.

20V Percussion Drill without Battery or Charger

Available

Drills and drivers

20V Percussion Drill without Battery or Charger

EDM 08496

€61.32

20 V drill with no battery or charger. It offers 2 speeds of 0-450 and 0-1,750 rpm, impact frequency of 0-9,000 and 0-32,400 ipm, maximum torque of 50 Nm with 19+1+1 settings. Includes 13 mm keyless screw holder, LED light, belt hook and hand strap.

3.7V Rotary Multi-Tool Kit with 51 Accessories

Available

Drills and drivers

3.7V Rotary Multi-Tool Kit with 51 Accessories

EDM 08439

€28.54

3.7V cordless rotary multi-tool with 1500 mAh battery. Offers 6 adjustable speeds between 9,000 and 20,000 rpm, digital speed indicator, and work LED light. Includes 51 accessories for cutting, sanding, and polishing, carrying case, and USB-C charging. Dimensions 160 x ø30 mm.

Brushless rotary hammer 20 V kit with 4.0 Ah battery and charger

Available

Demolition and Pneumatic Hammers

Brushless rotary hammer 20 V kit with 4.0 Ah battery and charger

EDM 08438

€175.37

20 V wireless rotary hammer with brushless motor and SDS Plus mandrel. It offers 2.7 J impact energy and 4,300 ipm. Includes 4.0 Ah Li-ion battery, 60 W charger, three drill bits, two chiselles and transport case for professional use on site.

Mini electric air pump with LED light and nozzles

Available

Machines and Tools

Mini electric air pump with LED light and nozzles

EDM 99062

€24.01

Mini electric air pump with LED light and quick fill function. Incorporates rechargeable lithium polymer battery of 3.7 V and 2000 mAh, with fast charging via USB-C cable. It offers a flow capacity of 200 l/min and allows both inflating and deflating elements.

Adhesive steel gap filler for 8-14 mm level difference, gold, 83 x 3.6 cm

Available

Joint Covers

Adhesive steel gap filler for 8-14 mm level difference, gold, 83 x 3.6 cm

EDM 86264

€11.72

Flooring model steel joint to compensate for uneven levels from 8 to 14 mm between surfaces. Its installation is fast thanks to the integrated adhesive band. It has a gold finish (06) and dimensions of 83 x 3.6 cm, ensuring a stable and safe transition on the pavement.

1
…
14
15
16
…
4477

Product added to wishlist