Hardware

Showing 433-468 of 66688 item(s)

Standard Ceramic Tile and Slate Drill Bit 8 mm

Available

Drills

Standard Ceramic Tile and Slate Drill Bit 8 mm

EDM 16059

Drill bit designed for drilling hard ceramic materials such as porcelain and slate, with a diameter of 8 mm and a maximum speed of 1200 RPM. Ideal for applications requiring precision on abrasive surfaces.

Standard ceramic drill bit for porcelain and slate 6 mm

Available

Drills

Standard ceramic drill bit for porcelain and slate 6 mm

EDM 16058

€5.12

Ceramic drill bit for drilling porcelain, tile and slate with a diameter of 6 mm and 1200 rpm. Designed for abrasive materials, it requires continuous water cooling during use.

Standard Ceramic Drill Bit for Porcelain and Slate ø5 mm

Available

Drills

Standard Ceramic Drill Bit for Porcelain and Slate ø5 mm

EDM 16057

€5.12

Standard drill bit for drilling in ceramic tile and granite, diameter 5 mm, 1200 rpm. Designed for hammer drills, it offers high resistance in ceramic materials and artificial stones.

Standard Ceramic Tile and Slate Drill Bit 4 mm

Available

Drills

Standard Ceramic Tile and Slate Drill Bit 4 mm

EDM 16056

€5.02

Drill bit designed for drilling hard ceramic materials such as porcelain and slate, with a diameter of 4 mm. Resistant to high rotation speeds up to 1200 rpm, requiring constant water cooling during the drilling process.

Professional Porcelain Drill Bits 4-5-6-8 mm Set of 4

Available

Drills

Professional Porcelain Drill Bits 4-5-6-8 mm Set of 4

EDM 16055

€83.15

Professional drills for drilling ceramic and porcelain materials, diameters 4, 5, 6 and 8 mm, set of 4 pieces with carbide tip for high resistance and precision in industrial applications.

Professional drill for ceramic and porcelain ø10 mm

Available

Drills

Professional drill for ceramic and porcelain ø10 mm

EDM 16054

€29.52

Professional drill for drilling ceramic, porcelain and slate with a diameter of 10 mm. Manufactured according to DIN 8039, with revolutionary high-performance carbide geometry. Resistant to abrasive and hard materials, recommended for applications in dense ceramics. Maximum operating speed of 600 rpm.

Professional Drill for Ceramic, Porcelain and Slate ø8 mm

Available

Drills

Professional Drill for Ceramic, Porcelain and Slate ø8 mm

EDM 16053

€24.39

Professional drill for drilling ceramic materials such as glazed tile, porcelain and slate with a diameter of 8 mm. Manufactured according to DIN 8039, with a ground body and revolutionary high-performance carbide geometry. Maximum operating speed of 800 rpm.

Professional Drill for Ceramic Tile and Slate 6 mm

Available

Drills

Professional Drill for Ceramic Tile and Slate 6 mm

EDM 16052

€18.61

Professional carbide drill for drilling glaze, ceramic and slates with a diameter of 6 mm. Designed according to DIN 8039 standard, it offers high wear resistance and precision in demanding operations.

Professional Drill for Ceramic and Porcelain ø5 mm

Available

Drills

Professional Drill for Ceramic and Porcelain ø5 mm

EDM 16051

€18.77

Professional drill for drilling glaze and porcelain with a 5 mm diameter. Designed for high resistance and precision in industrial applications, it offers uniform wear and superior durability on refractory materials.

Professional Drill for Ceramic and Porcelain ø4 mm

Available

Drills

Professional Drill for Ceramic and Porcelain ø4 mm

EDM 16050

€17.74

Professional drill for tile and porcelain, 4 mm, designed according to DIN 8039 standard with high-performance carbide insert for abrasive applications. Wear resistant and suitable for maximum rotation speeds of 1200 rpm.

Bricks for drilling in concrete and stone with ø5-6-8-10 mm

Available

Drills

Bricks for drilling in concrete and stone with ø5-6-8-10 mm

EDM 16049

€21.88

Wall drills for brick, concrete and stone drilling, diameter ø5-6-8-10 mm, three-edge monoblock tip and 130° angle for greater precision. Includes 4 pieces with a total weight of 12.47 kg.

Available

Drills

12 mm wall drill bit with 3-edge tip

EDM 16048

€8.35

Wall drill bit with a 3-flute monoblock tip geometry and 130° angle, ideal for percussion work. Diameter ø12 mm with 3 evacuation channels that improve the drill's lifespan and accuracy.

Available

Drills

Delta 3 Plus 10 mm Wall Drill

EDM 16047

€5.92

Wall drill with a 3-flute monoblock tip geometry and a 130° angle, designed for percussion work. Diameter ø10 mm with 3 evacuation channels that improve tool life and allow centered and precise holes.

Available

Drills

Delta 3 Plus 8mm Wall Drill Bit

EDM 16046

€4.45

Wall drill bit with an 8 mm diameter, designed for drilling in brick, block and concrete. Its tip with 3 flutes and a 130° angle provides precision and centering during operation. The triple channel evacuation improves performance in percussion.

Available

Drills

Delta 3 Plus 6 mm Wall Drill Bit

EDM 16045

€3.59

Wall drill bit with a 3-flute monoblock tip geometry and 130° angle, designed for percussion work. Diameter ø6 mm with 3 evacuation channels that improve precision and tool lifespan.

Available

Drills

Delta 3 Plus 5 mm Wall Drill

EDM 16044

€3.59

Wall drill bit in tempered steel with a diameter of 5 mm, designed for precise drilling in resistant materials. Includes optimized cutting blades for greater durability and efficiency in industrial work.

HSS-CO StepCut Drill Bits ø2-3-4-5-6-8 mm, 6-Piece Set

Available

Drills

HSS-CO StepCut Drill Bits ø2-3-4-5-6-8 mm, 6-Piece Set

EDM 16042

€63.56

Set of 6 HSS-CO StepCut drill bits with a diameter of 2 mm, designed for drilling in tubes and curved surfaces. Manufactured from high-speed steel HSS-CO 5%, with N-type helix at 30°. Includes stepped tip that prevents slippage during the process.

HSS-Co StepCut ø10 mm Drill Bit for Tubing Drilling

Available

Drills

HSS-Co StepCut ø10 mm Drill Bit for Tubing Drilling

EDM 16041

€27.84

HSS-Co StepCut ø10 mm drill with N-type helix and 30° angle, designed for drilling on curved and unstable surfaces. Resistant to high stresses up to 120 kg/mm², ideal for materials such as stainless steel.

HSS-Co StepCut Ø9 mm Drill Bit for Tubes and Curved Surfaces

Available

Drills

HSS-Co StepCut Ø9 mm Drill Bit for Tubes and Curved Surfaces

EDM 16040

€26.39

HSS-Co drill bit with StepCut tip for drilling in tubes and curved surfaces. Diameter Ø9.0 mm, N-type helix at 30°, manufactured according to DIN 338 standard with HSS CO 5% material. Net weight 15.04 kg.

HSS-CO StepCut ø8 mm Drill Bit for Tubes and Curved Surfaces

Available

Drills

HSS-CO StepCut ø8 mm Drill Bit for Tubes and Curved Surfaces

EDM 16039

€20.47

Drill bit with stepped tip (StepCut) for drilling in tubes and curved surfaces, manufactured in HSS-Co 5% according to DIN 338, N-type helix at 30°, diameter 8 mm, ideal for stainless steel and metals up to 120 kg/mm².

HSS-CO StepCut Drill Bit Diameter 7 mm for Drilling Tubes

Available

Drills

HSS-CO StepCut Drill Bit Diameter 7 mm for Drilling Tubes

EDM 16038

€16.96

HSS-CO StepCut drill of 7 mm designed for tube drilling with specialized steel rapid and CO coating, offering high wear resistance and precise performance in metallic and non-metallic materials.

HSS-Co StepCut ø6 mm Drill Bit for Tubing and Curved Surface Drilling

Available

Drills

HSS-Co StepCut ø6 mm Drill Bit for Tubing and Curved Surface Drilling

EDM 16037

€13.02

6 mm HSS-Co StepCut drill designed for precise drilling in tubes and curved surfaces, with optimized cutting technology that minimizes deviation during processing.

HSS-Co StepCut ø5 mm Drill Bit for Tubing

Available

Drills

HSS-Co StepCut ø5 mm Drill Bit for Tubing

EDM 16036

€12.25

HSS-Co StepCut ø5 mm drill bit with stepped tip and N-type helix at 30°, designed for drilling tubes and curved surfaces with high precision. Manufactured according to DIN 338 standard, it offers stability in materials resistant up to 120 kg/mm².

HSS-Co StepCut Ø4 mm Drill Bit for Tubes and Curved Surfaces

Available

Drills

HSS-Co StepCut Ø4 mm Drill Bit for Tubes and Curved Surfaces

EDM 16035

€9.75

HSS-Co StepCut Ø4 mm drill for drilling in tubes and curved surfaces, with N-type helix at 30° and anti-adhesive coating. Superior mechanical resistance over 120 kg/mm², ideal for industrial applications in metallic and non-metallic materials.

Available

Drills

Broca din338 hss-co stepcut ø3,00 mm

EDM 16034

€7.10

HSS-Co drill with StepCut tip, diameter 3.00 mm for precise milling in resistant materials. Designed for CNC machine tools and machining centers, it offers high wear resistance thanks to its HSS-CO technology and optimizes the surface quality of the drill.

Din338 hss-co drill with split point tip 2 mm

Available

Drills

Din338 hss-co drill with split point tip 2 mm

EDM 16033

€31.15

Brocas din338 hss-co with split point tip and special edge for stainless steel, diameter 2 mm. Designed for work on stainless steels and metals, with a 130° tip angle and N-type helix 30°.

Available

Drills

Split Point Drill 10 mm

EDM 16032

€16.53

HSS-Co drill with split point tip and specialized edge for drilling in stainless steels and resistant metals, diameter 10 mm, tip angle 130°, N type helix 30°.

Available

Drills

HSS-Co Drill with Split Point Tip 9 mm

EDM 16031

€14.51

HSS-Co drill with split point tip of 9 mm, tip angle 130° and N-type helix 30°. Designed for precise drilling in resistant materials such as stainless steel, it offers stability during cutting and greater control in industrial applications.

Broca din338 hss-co split point inox 8 mm

Available

Drills

Broca din338 hss-co split point inox 8 mm

EDM 16030

€10.93

Drill with split point for precise machining in stainless steel, diameter 8 mm. The HSS-Co design offers high resistance and durability in industrial applications.

Available

Drills

HSS-Co Drill with Split Point Tip 7 mm

EDM 16029

€8.77

HSS-Co drill with split point tip and special edge for stainless steel, diameter 7 mm, tip angle 130°, N type helix 30°. Designed for precise drilling in stainless steels and other metals, it offers superior performance thanks to its self-centering technology and special chip-breaking groove.

HSS-Co Drill with Split Point Tip 6 mm for Stainless Steel

Available

Drills

HSS-Co Drill with Split Point Tip 6 mm for Stainless Steel

EDM 16028

€6.86

HSS-Co drill with split point ø6 mm, tip angle 130° and N-type helix 30°. Designed for precise drilling in stainless steels and resistant materials with high durability.

DIN 338 HSS-Co Split Point 5 mm Drill for Stainless Steel

Available

Drills

DIN 338 HSS-Co Split Point 5 mm Drill for Stainless Steel

EDM 16027

€5.09

HSS-Co drill with split point tip of 5 mm designed for machining stainless steel. It features a 130° tip angle and N-type helix of 30° for efficient performance in resistant materials.

Broca din338 hss-co split point 4 mm 2 uds

Available

Drills

Broca din338 hss-co split point 4 mm 2 uds

EDM 16026

€8.57

HSS-Co drill with Split Point tip of 4 mm, innovative design for drilling stainless steels and resistant metals. It features a 130° tip angle and N-type helix of 30° for efficient chip removal.

Available

Drills

HSS-Co Drill with Split Point Tip 3 mm

EDM 16025

€6.52

HSS-Co drill with split point tip and special edge for stainless steel, diameter 3 mm, tip angle 130°, N type helix 30°. Designed for drilling in stainless steels and resistant metals with optimized performance.

Ground HSS-CO Drill Bits ø2-8 mm, 6-Piece Set

Available

Drills

Ground HSS-CO Drill Bits ø2-8 mm, 6-Piece Set

EDM 16024

€21.10

HSS-CO ground drills with a diameter of 2 mm, featuring a square tip and special steel for precise machining. Complete set of 6 pieces with an optimized surface finish to reduce friction during cutting.

Ground HSS-CO Drill 10 mm Self-centering Tip 135°

Available

Drills

Ground HSS-CO Drill 10 mm Self-centering Tip 135°

EDM 16023

€9.39

Ground HSS-CO drill according to DIN 338, diameter 10 mm, self-centering tip 135°, N type helix 30° for milling in steels and metals up to 120 kg/mm² with high wear resistance.

1
…
12
13
14
…
1853

Product added to wishlist