Ruko-101351-Broca escalonada HSS con 3 canales de salida Ø 4,0-20,0 mm (9 pasos)

Ruko-101351-Broca escalonada HSS con 3 canales de salida Ø 4,0-20,0 mm (9 pasos)

RUKO HSS Step Drill Bit with 3 Flutes Ø 4.0-20.0 mm (9 steps)

Brand: Ruko

Reference TUR 101351

Last items in stock

€78.81

VAT included

Ruko-101351 HSS stepped drill bit with 3 flutes, diameter from 4.0 to 20.0 mm. Ideal for drilling sheet metal up to 4 mm thick. Optimized design for precise and clean cutting, with laser-marked steps and a plastic case.

In stock 2 Items

Email address

Description

The Ruko-101351 step drill bit is a high-precision tool designed for sheet metal drilling in various industries, including electrical, plumbing, heating, and automotive. Its innovative design incorporates a split point cutting edge according to DIN 1412 C, allowing for easier and more precise drilling starts. With a 118° cutting angle and a 90° taper angle, this drill bit is optimized for right-hand cutting, ensuring efficient and high-quality results.

CBN (Cubic Boron Nitride) grinding and spiral chip flutes ensure a clean cut, minimizing noise, vibration, and burr formation. Each step of the drill bit is radially adjusted and ground, providing increased durability and performance. The steps are laser-marked for easy identification and use.

This tool is suitable for sheet metal up to 4 mm thick and is especially effective for drilling aluminum and soft metals.

Drilling diameter: Ø 4.0-20.0 mm (9 steps)
Cutting point: Split point DIN 1412 C
Cutting angle: 118º
Cone angle: 90º
Right-hand cutting
CBN ground for greater precision
Spiral flute design
Laser-marked steps
Suitable for sheet metal up to 4 mm thick
Includes translucent plastic case with hanger

Product Details

High: 2,50
Width: 2,50
EAN: 4007140109026
Manufacturer: Ruko
Weight (kg): 0,0600
Depth: 8,50
Reference: TUR 101351
GPSR Safety warning: No
GPSR Manufacturer information: AGHASA TURIS S.A, Calle de Rey Pastor, 17
28914 Leganés, Madrid - +34916334450
GPSR EU responsible person: AGHASA TURIS S.A, Calle de Rey Pastor, 17
28914 Leganés, Madrid - +34916334450
GPSR e-mail manufacturer: [email protected]

In stock 2 Items

Reviews (0)

No reviews

12 other products in the same category:

Corona SDS Muros 95 mm.

Corona SDS Muros 95 mm. 2

Drills

SDS Wall Crown 95 mm.

WOLFPACK LINEA PROFESIONAL

AFT 09112290

The 95mm SDS Wall Hole Saw is ideal for drilling into masonry, walls, marble, cement, and brick. It includes a hole saw, a chuck, and a pilot bit that is easy to install and remove. The cross-shaped pilot bit improves accuracy and stability while drilling. With hardened tips for smooth, fast cutting, it's perfect for electrical installations, air...

Ruko-204520-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 52,00 mm)

Drills

RUKO HSS milled twist drill bit, 52 mm diameter, DIN 345 tapered shank.

TUR 204520

Ruko-204520 high-performance twist drill bit with a DIN 345 type N tapered shank. Designed for drilling steel, cast iron, and alloys. Features a 118° cutting angle and a bright finish. Includes a translucent plastic case. Diameter: 52 mm.

Ruko-108218-Broca hueca HSS vástago Weldon profundidad 30 mm (Ø 18 mm)

Available

Drills

HSS RUKO hollow drill bit, Weldon shank 30 mm depth, diameter 18 mm.

TUR 108218

HSS hollow drill bit with Weldon shank, 30 mm depth and 18 mm diameter. Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Presented in a translucent plastic case.

Husillo Sds Broca Interc. 14-30

Husillo Sds Broca Interc. 14-30 2

Available

Drills

SDS Spindle Interc Drill Bit 14-30

COF 09810014

Spindles with drill bits for the centering drill clamping system for bimetallic crowns. SDS plus drill chuck anchor.Diameter [mm]: 14 - 30

Ruko-102140-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 63 mm)

Ruko-102140-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 63 mm) 2

Drills

RUKO HSS 90º conical countersink Ø max. 63 mm DIN 335 form C

TUR 102140

Ruko-102140 countersink, DIN 335, 90°, HSS, with a maximum diameter of 63 mm. Designed for precise cutting of non-ferrous metals, steel, and plastics. Includes a translucent plastic case. Morse taper handle and 3 cutting edges.

Ruko-217016-Broca centradora doble DIN 333 A HSS (Ø 1,60 mm)

Available

Drills

RUKO double centering drill bit DIN 333 A HSS Ø 1.60 mm for drilling precision.

TUR 217016

DIN 333 A HSS double centering drill (Ø 1.60 mm) designed for centering holes. It features a 60° centering angle and a 120° rake angle, with h9 tolerance and right-hand cutting. Ideal for precision work.

Ruko-2500725T-Pack de 10 brocas helicoidales DIN 338 tipo N HSS-TiN rectificada con autocentrado (Ø 7,25 mm)

Available

Drills

RUKO HSS-TiN Twist Drills Ø 7.25 mm, Pack of 10, Self-Centering, DIN 338.

TUR 2500725T

Pack of 10 DIN 338 type N HSS-TiN twist drill bits, 7.25 mm in diameter. Designed for efficient cutting of steel and cast iron, they offer greater durability and speed thanks to their titanium nitride coating. Includes plastic case.

Ruko-2144025-Pack de 2 brocas helicoidales DIN 338 tipo N HSS (Ø 2,5 mm)

Available

Drills

RUKO HSS Type N Twist Drills Ø 2.5 mm - Pack of 2 Units DIN 338

TUR 2144025

Pack of 2 high-precision DIN 338 type N HSS twist drills (Ø 2.5 mm), ideal for drilling steel, cast iron, and alloys. They feature high concentricity, a bright surface, and right-hand cutting, ensuring optimal performance in a variety of applications.

Ruko-102882-Avellanador cónico ULTIMATECUT 4S HSS DIN 355 90° (Ø 23,0 mm)

Ruko-102882-Avellanador cónico ULTIMATECUT 4S HSS DIN 355 90° (Ø 23,0 mm) 2

Available

Drills

ULTIMATECUT 4S HSS tapered countersink Ø 23 mm, DIN 355, 90° angle

TUR 102882

The ULTIMATECUT 4S HSS DIN 355 90° taper countersink (Ø 23.0 mm) offers superior performance in a variety of applications. With four cutting edges and an uneven pitch design, it ensures smooth and precise cuts in materials such as steel, aluminum, and plastics.

Ruko-259095E-Broca helicoidal FLOWSTEP® HSSE-Co 5 (Ø 9.5 mm)

Available

Drills

RUKO FLOWSTEP® HSSE-Co 5 twist drill bit, 9.5 mm diameter.

TUR 259095E

The Ruko-259095E FLOWSTEP® HSSE-Co 5 (Ø 9.5 mm) twist drill bit, with its extended lifespan, allows you to drill up to 5 times more holes. It offers fast and efficient drilling, precise centering on round surfaces, and a smooth, jam-free drilling process.

Ruko-204175-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 17,50 mm)

Available

Drills

RUKO HSS milled helical drill bit, diameter 17.50 mm, tapered shank DIN 345.

TUR 204175

Ruko-204175 high-performance twist drill bit with tapered shank DIN 345, Ø 17.50 mm. Ideal for drilling steel, cast iron, and alloys. High break strength, 118° cutting angle, and bright finish. Includes translucent plastic case.

Broca Mango Cónico Cobalto 23 Mm.

Drills

Cobalt Conical Handle Drill Bit 23 mm.

COF 09692300

Cobalt drill bit with conical handle "Morse Cone" made of HSS CO high-speed steel, rectified and 118º tip, sharp.Diameter [mm]: 23 Cone: 3 Total length: 253 Cut length: 155

Product added to wishlist