Macho Manual - M27 X 3,00 Mm

Macho Manual - M27 X 3,00 Mm

Macho Manual - M27 X 3,00 Mm

Macho Manual - M27 X 3,00 Mm

Manual Tap - M27 x 3.00 mm

Out of stock

Reference COF 09952730

€190.30

VAT included

Manual tap sets (3 pieces) STEPS: METRIC- WITHWORTH - GAS - BSF - BSP - UNC - UNF, SAE - BSPT - UNEF - BA AND PG - NPT. The tap set contains two or three pieces depending on the thread pitch.

Diameter x pitch [mm]: M27 x 3.00
Contains: 3
Model: -

Email address

Description

Manual Tap - M27 x 3.00 mm

This set of manual taps includes 3 pieces with different thread pitches, covering a wide variety of standard measurements such as METRIC , WITHWORTH, GAS, BSF, BSP, UNC, UNF, SAE, BSPT, UNEF, BA, PG and NPT. Each tap set contains two or three pieces, depending on the required thread pitch.

Diameter x pitch [mm]: M27 x 3.00
Contains: 3 pieces
Model: -

Product Details

EAN	8445187160192
Reference	COF 09952730
High	3,50
Width	10,00
Depth	15,00
Weight (kg)	0,845

Reviews (0)

No reviews

GPSR

Fabricante	COFAN
Dirección postal	Polígono Industrial El Saladar, 13600 Alcázar de San Juan, Ciudad Real , 13600 Alcázar de San Juan
Contacto electrónico	[email protected]
Referencia	COF 09952730
EAN	8445187160192

12 other products in the same category:

S.of. 701w hammer drill with case dwd024ks-qs dewalt

Available

Drilling / Screwing

DEWALT 701W Hammer Drill with Case (DWD024KS-QS)

EDM 84551

DEWALT 701W Hammer Drill with Case (DWD024KS-QS) 13mm automatic drill chuck 1 variable speed Keyless chuck for quick bit change Lock button for continuous operation Output power: 302W Speed: 0-2800rpm Torque: 8.6Nm Weight: 1.82kg Rubber rear handle for greater comfort

Avellanador Cónico 90º - 7.0 Mm

Available

Drilling / Screwing

90º Conical Countersink - 7.0 mm

COF 09910070

90° Ground High Speed Steel Conical Countersink with three CutsDrill range: 7.0 Length [mm]: 50 Stem Diameter: 6 mm

Macho Manual - M16 X 1.00 Mm

Macho Manual - M16 X 1.00 Mm 2

Last units

Drilling / Screwing

Manual Tap - M16 x 1.00 mm

COF 09951610

Manual tap sets (3 pieces) STEPS: METRIC- WITHWORTH - GAS - BSF - BSP - UNC - UNF, SAE - BSPT - UNEF - BA AND PG - NPT. The tap set contains two or three pieces depending on the thread pitch.Diameter x pitch [mm]: M16 x 1.00 Contains: 2 Model: Metric

Macho Manual - M20 X 1.50 Mm

Macho Manual - M20 X 1.50 Mm 2

Available

Drilling / Screwing

Manual Tap - M20 x 1.50 mm

COF 09952015

Manual tap sets (3 pieces) STEPS: METRIC- WITHWORTH - GAS - BSF - BSP - UNC - UNF, SAE - BSPT - UNEF - BA AND PG - NPT. The set of taps contains two or three pieces depending on the thread pitch.Diameter x pitch [mm]: M20 x 1.50 Contains: 2 Model: -

Avellanador Cónico 90º - 11.5 Mm

Available

Drilling / Screwing

90º Conical Countersink - 11.5 mm

COF 09910115

90° Ground High Speed Steel Conical Countersink with three CutsDrill range: 11.5 Length [mm]: 56 Stem Diameter: 8 mm

Macho Máquina Din376/374 Forma B M-27x3,00

Last units

Drilling / Screwing

Machine Male DIN376/374 Form B M-27x3.00

COF 09632730

For through holes 400-800 N/mmDiameter x pitch [mm]: M 27 x 3.00 L [mm]: 160 I [mm]: 38

Macho Manual - M20 X 2.50 Mm

Macho Manual - M20 X 2.50 Mm 2

Available

Drilling / Screwing

Manual Tap - M20 x 2.50 mm

COF 09952025

1 Reviews

Manual tap sets (3 pieces) STEPS: METRIC- WITHWORTH - GAS - BSF - BSP - UNC - UNF, SAE - BSPT - UNEF - BA AND PG - NPT. The set of taps contains two or three pieces depending on the thread pitch.Diameter x pitch [mm]: M20 x 2.50 Contains: 3 Model: -

Macho Máquina Din376/374 Forma B M-22x2,50

Last units

Drilling / Screwing

Machine Male DIN376/374 Form B M-22x2.50

COF 09632225

For through holes 400-800 N/mmDiameter x pitch [mm]: M 22 x 2.50 L [mm]: 140 I [mm]: 34

Taladro Percut Worgrip 20V 4 0Ah BRUSH

Taladro Percut Worgrip 20V 4 0Ah BRUSH 2

Available

Drilling / Screwing

Worgrip brushless hammer drill 20v 1 battery 4.0ah

ALFA 49901

20V power hammer drill with battery.Hammer, screwdriver and drill/21+3 positions.1 4.0 Ah battery and 230 V~ charger 50 Hz included.Maximum torque: 68 Nm - Compatible with 20V Worgrip batteries.Rigid PVC case that includes: 1 4.0 Ah lithium battery, quick charger, belt holder and 13 accessories.

Macho Máquina Ex-Din371 Forma C M-8x1,25

Available

Drilling / Screwing

Machine Male Ex-DIN371 Form C M-8x1.25

COF 09320812

"Inox" machine taps for blind holes. This tap allows you to make through holes in hard materials such as stainless. It can also be used as a manual tap.Diameter x pitch [mm]: M 8 x 1.25 L [mm]: 90 I [mm]: 22

Macho Máquina Ex-Din371 Forma C M-4x0,70

Last units

Drilling / Screwing

Machine Male Ex-DIN371 Form C M-4x0.70

COF 09320470

"Inox" machine taps for blind holes. This tap allows you to make through holes in hard materials such as stainless. It can also be used as a manual tap.Diameter x pitch [mm]: M 4 x 0.70 L [mm]: 63 I [mm]: 13

TALADRO PERCUTOR A BATERIA 62NM + 2 BATERIAS 2AH WADFOW

Available

Drilling / Screwing

WADFOW 62Nm Cordless Hammer Drill, 2 x 2Ah Batteries, Brushless Motor, 2 Speeds

GIB 051073

WADFOW Cordless Hammer Drill, 62Nm, brushless motor, 20V. Two speeds (0-500/0-2000 rpm) and 30,000 bpm. Includes two 2Ah batteries, charger, drill bits, and carrying case. Work light and LED charging indicator. Code WCDP6281E.

Product added to wishlist