Electrical protection

Showing 121-144 of 4706 item(s)

Available

Frequency Inverters / Variable Frequency Drives (VFD)

IMPO VW3A1102

Mounting kit for remote graphic terminal in speed changers of the Altivar range, compatible with models Altivar 32, 61, 71, 212, 61Q, 71Q and ATV320. Designed for installation in industrial environments, it offers IP54 protection. Includes screws, washers and mounting hardware. Weight: 0.15 kg. It complies with EU REACH and RoHS regulations (applicable...

Remote graphic terminal Altivar 08 240 x 160 pixels

Available

Frequency Inverters / Variable Frequency Drives (VFD)

Remote graphic terminal Altivar 08 240 x 160 pixels

IMPO VW3A1101

€333.80

240 x 160 pixel remote graphic terminal for Altivar range speed changers. It allows to control, adjust and configure the variator, display current values and manage configurations. Designed for enclosure door mounting, with IP54 protection. It supports 8 lines of text and operates in environments from -15 to 50 °C.

SUB-D 9 Line Terminator for Rack, Set of 2

Available

Industrial automation

SUB-D 9 Line Terminator for Rack, Set of 2

IMPO TSXTLYEX

€82.69

Line finisher for rack end, set of 2 units, compatible with the automation platform Modicon Premium model TSXRKY..EX. Each unit includes one SUB-D 9 connector with A label and one with B label, designed to ensure signal integrity in industrial control systems. Weight: 0.05 kg.

Available

Seccionadores

TransferPacT Module CAN Extension 24 V

IMPO TPCDIO15

€170.53

TransferPacT module for CAN bus extension and external 24 VDC power supply, designed for integration into signaling systems. Supports connection to external HMI, with 30 V DC electrical isolation, left-bottom mounting position, and screw-type terminal for wire sections from 0.05 to 2.6 mm².

Available

Industrial automation

Modbus RS485 Communication Module 0-248

IMPO TPCCOM16

€264.77

Modbus RTU slave communication module on RS485 interface for integration into automation systems. Supports transmission speeds of 4800, 9600 and 19200 bauds with even parity. Configuration address from 0 to 248. Connection via front-mounted screw terminals, square mounting. Shielded twisted pair cable 1.5 mm².

Plug-in miniature relay 3 A, 4 C/O, 230 V AC

Available

Interface and miniature relays

Plug-in miniature relay 3 A, 4 C/O, 230 V AC

IMPO RXM4GB2P7

€15.54

Harmony series miniature plug-in relay, with 4 C/O contacts, control voltage 230 V AC 50/60 Hz, rated current 3 A, mechanical durability of 10 million cycles and resistance to 2.5 kV voltage peaks. Includes status LED and lockable test button.

PowerLogic PM8240 flush-mounted power meter

Available

Industrial automation

PowerLogic PM8240 flush-mounted power meter

IMPO METSEPM8240

€2,508.67

PM8240 measuring center of the PowerLogic range, designed for precise monitoring of electrical parameters in industrial and high consumption installations. It measures voltage, current, frequency, active, reactive and apparent power with precision Class 0.2S. Supports up to 63 harmonics, energy quality analysis according to IEC 61000-4-30 and class S.

Available

Contactors

Coil LXD1 110 VAC for TeSys D Contactor

IMPO LXD1F7

€14.68

LXD1 contactor coil for TeSys D series, designed to operate at 110 V CA 50/60 Hz. Characterised by an average strength of 124.1 - -20 °C and a closed circuit inductance of 4.6 H. Compatible with LC1D09...D38 and LC1DT20...DT40 contactors.

Coil for TeSys D LXD1 Contactor 48 V AC 50/60 Hz

Available

Contactors

Coil for TeSys D LXD1 Contactor 48 V AC 50/60 Hz

IMPO LXD1E7

€14.64

Tesys D contactor coil model LXD1, designed to operate at 48 V AC at 50/60 Hz, with an average strength of 21.7 at 20 °C and a closed circuit inductance of 0.87 H. Compatible with LC1D09...D38 and LC1DT20...DT40 contactors.

Available

Contactors

Tesys F LX9FG Coil 380 V AC 40-400 Hz

IMPO LX9FG380

€213.71

LX9-F coil for Tesys F LC1F185 and LC1F225 contactors, designed for AC operation at 380/400 V and 40-400 Hz. Offers a medium resistance of 128 Ω and an inductance of 16.4 H. Supports up to 10 million mechanical cycles and a operating range of 2400 cycles/h at less than 55 °C.

1P 45° 12 A Lever Switch with Screw Mounting

Available

Seccionadores

1P 45° 12 A Lever Switch with Screw Mounting

IMPO K1E005QLH

€66.17

Timing lever switch, 1 pole, switching angle of 45°, current capacity up to 12 A, protection rating IP40. Designed for front mounting with multi-fixation, includes 45 x 45 mm front plate and 35 mm black handle.

Available

Contactors

Auxiliary contactor 72 V DC 5NA

IMPO CAD50SD

€82.36

72 V DC auxiliary minicontactor with 5 contacts normally open, designed for control circuits in industrial applications. It supports insulation voltages up to 690 V AC, conventional 10 A thermal current and resistance to 6 kV voltage peaks. It meets IEC 60947-5-1 standards and is certified UL, CSA and UKCA.

ComPacT NSX630H 3P3R 630A Micrologic 2.3 Automatic Switch

Available

Miniature circuit breakers

ComPacT NSX630H 3P3R 630A Micrologic 2.3 Automatic Switch

IMPO C63H32D630

€2,614.22

ComPacT NSX630H 3P3R 630 A, 690 V AC automatic switch, with Micrologic 2.3 control unit. It offers protection against overloads and short circuits with overload current adjustment from 250 to 630 A and fixed delay in short duration.

ComPacT NSX250F 4P3R 250A 36kA Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX250F 4P3R 250A 36kA Automatic Circuit Breaker

IMPO C25F6TM250

€1,280.93

ComPacT NSX250F 4P3R automatic switch with 36 kA cutting capacity at 380-415 V AC, 250 A to 40 °C rated current, thermal-magnetic technology, adjustable overload adjustment (0.7–1 × In), short circuit protection and fixed installation with rear plate mounting, compatible with IEC 60947-2 and HB2 standards.

ComPacT NSX250F 4P4R 200A TMD Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX250F 4P4R 200A TMD Automatic Circuit Breaker

IMPO C25F4TM200

€1,092.75

Automatic switch ComPacT NSX250F 4P4R with nominal current 200 A to 40 °C, cutting capacity Icu from 36 kA to 380/415 V AC, thermal-magnetic technology with overload adjustment (0.7–1 × In) and fixed delay (120–400 s to 1.5 × In), fixed mounting on back plate, IP40 protection grade and suitable for operating temperatures from -25 °C to 70 °C.

ComPacT NSX250F 4P4R 160A TMD Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX250F 4P4R 160A TMD Automatic Circuit Breaker

IMPO C25F4TM160

€1,045.56

ComPacT NSX250F 4P4R automatic circuit breaker with rated current 160 A at 40 °C, breaking capacity Icu of 36 kA at 380/415 V AC, thermal-magnetic TM-D technology, adjustable long-term current setting between 0.7 and 1 × In, protection degree IP40 and IK07, designed for industrial applications up to 690 V AC.

ComPacT NSXm100N 4P4R 32A Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSXm100N 4P4R 32A Automatic Circuit Breaker

IMPO C11N4TM032L

€451.35

ComPacT NSXm100N 4P4R 32 A automatic circuit breaker, 690 V AC, with breaking capacity Icu of 50 kA at 440 V AC and 10 kA at 690 V AC, thermal-magnetic TM-D technology, adjustable long-time current setting between 0.7 and 1.0 In, protects 4 poles with neutral on the left, fixed mounting, IP40 and IK07 protection rating, compatible with signaling and...

ComPacT NSX100N 4P4R 40A Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX100N 4P4R 40A Automatic Circuit Breaker

IMPO C10N4TM040

€415.74

ComPacT NSX100N 4P4R automatic circuit breaker, 40 A, 690 V AC, with thermal-magnetic TM-D technology, breaking capacity Icu of 50 kA at 380/415 V AC, adjustable overload setting (0.7–1 x In), protection against short circuits and overloads, IP40 protection rating, fixed design with rear mounting plate, compliant with HB2 and RoHS standards, suitable for...

ComPacT NSX100N 4P4R 32A TMD Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX100N 4P4R 32A TMD Automatic Circuit Breaker

IMPO C10N4TM032

€415.74

ComPacT NSX100N 4P4R automatic circuit breaker with thermal-magnetic protection, rated current 32 A at 40 °C, breaking capacity Icu of 50 kA at 380/415 V AC, fixed mounting design, protection rating IP40 and IK07, compliant with HB2 and RoHS standards, suitable for industrial installations in demanding environments.

ComPacT NSX100N 4P4R 25A TMD Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX100N 4P4R 25A TMD Automatic Circuit Breaker

IMPO C10N4TM025

€415.74

ComPacT NSX100N 4P4R automatic switch with thermal-magnetic protection, 25 A to 40 °C nominal current, Icu cutting capacity from 50 kA to 380/415 V AC, fixed assembly, IP40 protection grade, compatible with HB2 and RoHS standards, suitable for industrial installations up to 2000 m altitude.

ComPacT NSX100N 4P4R 40A Micrologic 2.2 Automatic Switch

Available

Miniature circuit breakers

ComPacT NSX100N 4P4R 40A Micrologic 2.2 Automatic Switch

IMPO C10N42D040

€540.37

40 A ComPacT NSX100N 4P4R automatic switch, with Micrologic 2.2 control unit, designed for industrial applications with a current greater than 0.1 A. It offers protection against overloads and short circuits with fixed delay adjustment, cutting capacity up to 50 kA at 380–415 V AC, and supports voltages up to 690 V AC.

ComPacT NSX100N 3P3R 25A TMD Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX100N 3P3R 25A TMD Automatic Circuit Breaker

IMPO C10N3TM025

€298.60

ComPacT NSX100N 3P3R automatic circuit breaker with breaking capacity Icu of 50 kA at 440 V AC, thermal-magnetic design with adjustable nominal current setting between 0.7 and 1.0 times In, protects against overloads and short circuits.

ComPacT NSX100N 3P3R 40A Micrologic 2.2 Automatic Circuit Breaker

Available

Miniature circuit breakers

ComPacT NSX100N 3P3R 40A Micrologic 2.2 Automatic Circuit Breaker

IMPO C10N32D040

€421.55

Auto Switch ComPacT NSX100N 3P3R, 40 A, 690 V AC, with Micrologic 2.2 control unit. It offers protection against overload and short circuits with long-term shooting current adjustment (18–40 A) and fixed delay. Icu cutting capacity from 50 kA to 380–415 V AC, category A, with electric durability of 50,000 cycles.

5-Unit Protective Cover Kit for Modicon M340 Modules

Available

Industrial automation

5-Unit Protective Cover Kit for Modicon M340 Modules

IMPO BMXXEM010

€41.94

Kit consisting of 5 protective covers for empty modules on the Modicon M340 automatic platform. Designed to cover vacant slots in racks, ensuring protection against dust and electromagnetic interference. Compatible with BMXXBP0400, BMXXBP0600, BMXXBP0800 and BMXXBP1200 models. Made of resistant materials and proactive compliance with the EU RoHS...

Product added to wishlist