Power tools

Showing 73-84 of 11238 item(s)

Last units

Water Pumps

EDM 16870

Drill pump with a pressure capacity of 3000 l/h and a maximum height of 30 m, compatible with 600 W drills. Includes self-priming up to 3 m and G 3/4 inch connection. Construction in reinforced plastic with fiberglass.

Available

Brushes / Bonets / Rubber Plates

Buffing Pad Ø180 mm Lamb's Wool Felt

EDM 16118

€3.27

Ø180 mm buffing pad in lamb's wool felt for surface finishes and compound removal. Designed for manual use or in machine tools with uniform wear and high adhesion.

Steel wire brush ø120 x 100 mm for heavy-duty derusting

Available

Brushes / Bonets / Rubber Plates

Steel wire brush ø120 x 100 mm for heavy-duty derusting

EDM 16117

€32.33

Steel wire brush ø120 x 100 mm for heavy-duty cleaning and derusting on stone, concrete and hard wood. Wear-resistant thanks to its STEEL material. Designed for use on high-performance sanding rollers.

Silicon Carbide Brush 120 x 100 mm for Heavy-Duty Sanding

Available

Brushes / Bonets / Rubber Plates

Silicon Carbide Brush 120 x 100 mm for Heavy-Duty Sanding

EDM 16115

€51.39

Silicon carbide brush ø120 x 100 mm for heavy-duty sanding on metal surfaces and hard wood. Built with silicon carbide fiber for high wear resistance, diameter 120 mm, width 100 mm.

120 mm Grind Brush 320 Grain for Curved Surfaces

Available

Brushes / Bonets / Rubber Plates

120 mm Grind Brush 320 Grain for Curved Surfaces

EDM 16114

€23.81

Curved sanding brush with a diameter of 120 mm and grain size 320 for fine finishes on soft wood and metals. Dimensions: 12 x 10 cm. Designed for curved and flat surfaces, it allows precise and uniform sanding.

Available

Brushes / Bonets / Rubber Plates

120 mm Ø x 10 cm L Polishing Brush

EDM 16113

€21.30

Polishing brush with a diameter of 120 mm and length of 100 mm, designed to polish metal, wood, and stone surfaces. Effectively removes opaque spots and scratches. Dimensions: 120 mm Ø x 100 mm L.

Hard Metal Rotary Milling Cutter for Locks 6 mm x 2.5 mm x 60 mm

Available

Router Bits

Hard Metal Rotary Milling Cutter for Locks 6 mm x 2.5 mm x 60 mm

EDM 16108

€52.51

Hard metal rotary milling cutter for locks, diameter 6 mm, width 2.5 mm and cutting depth 60 mm. Designed for machining hardened materials with high resistance and precision.

Available

Drills

EDM 16107 Hard Metal Point Drill 6 mm

EDM 16107

€28.04

DIN338 drill bit with hardmetal tip, diameter 6 mm, point angle 118° and geometry n30. Designed for drilling hard metals and special steels in locksmithing at a recommended speed of 1350 rpm.

Hard Metal Square Bit 6 mm x 60 mm for Locksmiths

Available

Drills

Hard Metal Square Bit 6 mm x 60 mm for Locksmiths

EDM 16106

€69.87

Hard metal square bit for locksmiths, diameter 6 mm and length 60 mm, designed to drill bulb components and internal parts of security cylinders with high resistance and durability.

Stepped HSS Drill 14 Steps ø4 mm with Straight Channel

Available

Drills

Stepped HSS Drill 14 Steps ø4 mm with Straight Channel

EDM 16104

€91.50

Stepped HSS drill with 14 steps and straight channel, diameter of 4 mm. Designed for drilling and enlarging holes in sheets up to 4 mm thick, ideal for steel, non-ferrous metals and plastics.

Stepped HSS Drill 9 Steps with Straight Channel ø4 mm

Available

Drills

Stepped HSS Drill 9 Steps with Straight Channel ø4 mm

EDM 16103

€55.78

Stepped HSS drill with 9 steps and straight channel, diameter 4 mm. Designed for drilling sheets up to 4 mm thick in steel, non-ferrous metals and plastics, with an ø8 mm handle and triple anti-slip plane.

Hardmetal Wall Penetration Ring 90 mm with SDS Plus Spindle

Available

Crown Bits

Hardmetal Wall Penetration Ring 90 mm with SDS Plus Spindle

EDM 16101

€135.76

Hardmetal wall penetration ring ø90 mm, includes SDS-plus spindle with M16 thread and guide drill. Cutting depth up to 60 mm. Designed for drilling in brick and construction materials.

Product added to wishlist