Tools

Showing 16441-16464 of 26472 item(s)

Available

Tourniquets

Turnstile DIN 5117 80x 500mm With Through Lever.

AFT 02150069

Turnstile DIN 5117 80x 500mm With Through Lever.Size: 80 x 500 mm.With through lever.Ideal for industrial work.Article also known as: clamp.Very useful for fixing parts that are going to be machined, glued, etc.

Erizo-LRB14-Lima de mecánico redonda basta 14"

Available

Files

ERIZO mechanical file with 14" coarse grit and ergonomic design for better grip.

TUR LRB14

€11.52

Erizo-LRB14 - 14" Coarse Round Mechanic's File, ideal for filing holes and concave surfaces. Its circular section tapers towards the tip, facilitating work in hard-to-reach areas and providing a precise finish in various applications.

Ruko-242205-Porta cojinetes DIN 225 (20 x 5 mm)

Available

Threading taps

RUKO DIN 225 bearing housing, 20 x 5 mm, high precision and durability.

TUR 242205

€11.06

Ruko-242205 DIN 225 (20 x 5 mm) bearing housing designed for closed and grooved threaded bearings according to DIN EN 24231. Made of steel and cast iron, it includes 5 fixing screws and comes in an individual plastic box.

Ruko-241145-Alargo para macho de roscar DIN 377 (14,5 x 174 mm)

Last units

Threading taps

RUKO male threading extension DIN 377, 14.5 x 174 mm, high precision and durability.

TUR 241145

€40.60

DIN 377 tap extension, dimensions 14.5 x 174 mm. Made of hardened and ground steel, with a square shank according to DIN 10. Presented in an individual plastic case with a hanger, ideal for extending taps by hand.

Desencofrador de acero forjado 180x600x42mm 98218600 Viat

Available

Screwdrivers

Forged Steel Stripper - Viat VIAT98218600

EDM 15534

€16.94

Forged Steel Stripper - Viat VIAT98218600 Measurements: 180x600x42mm Hardened head and nails for greater wear resistance Ideal for prying, removing nails and removing formwork boards

Broca Profesional Para Muros Mango Hexagonal 1/4 4 Mm

Available

Drills

Professional Wall Drill Bit Hexagonal Handle 1/4 4 mm

COF 09775004

€2.26

1/4" hexagonal shank wall drill bit, with double-cut tip welded at 1100ºC. Applications: Rotation and percussion in concrete, brick, stoneware, ceramics and marble.mm: 4

Erizo-LTF8-Lima de mecánico triangular fina 8"

Available

Files

8" TRIANGULAR HEDGEHOG mechanical file with fine design and high durability.

TUR LTF8

€7.95

Erizo-LTF8 - 8" Fine Triangular Mechanic's File, ideal for filing corners and sharp angles. Its triangular section with equal sides and double cuts on three faces allows for precise finishing on threaded teeth, milling cutters, and flat surfaces.

Osborn-0002613164-Cepillo taza acero de alambre ondulado con tuerca M14 y filamento Ø 0.30 mm (100x30 )

Osborn-0002613164-Cepillo taza acero de alambre ondulado con tuerca M14 y filamento Ø 0.30 mm (100x30 ) 2

Available

Brushes / Bonets / Rubber Plates

OSBORN cup brush made of crimped steel wire Ø 0.30 mm for cleaning and descaling

TUR 0002613164

€23.17

The Osborn-0002613164 brush is designed for deburring, stripping, and cleaning surfaces. With a 0.30 mm diameter filament, it is ideal for light, medium, and heavy-duty work on various surfaces, ensuring high performance and durability.

Osborn-0002507142-Cepillo circular acero de alambre ondulado con vástago de 6 mm y filamento de Ø 0.20 mm (80x19x20 )

Osborn-0002507142-Cepillo circular acero de alambre ondulado con vástago de 6 mm y filamento de Ø 0.20 mm (80x19x20 ) 2

Last units

Brushes / Bonets / Rubber Plates

OSBORN circular brush made of corrugated steel wire, 6 mm shank, Ø 0.20 mm.

TUR 0002507142

€11.16

Circular steel brush with crimped wire, 6 mm shank, and 0.20 mm diameter filament. Ideal for working in hard-to-reach areas, suitable for high-speed straight grinders. Perfect for deburring, grinding, and cleaning.

Ruko-239250-Cojinete redondo MF DIN EN 22568 HSS rectificado tipo B cerrado. Rosca MF25 x 1,5 mm

Last units

Threading taps

RUKO type B closed HSS round bearing, MF25 x 1.5 mm thread, DIN EN 22568.

TUR 239250

€64.18

MF DIN EN 22568 HSS ground type B closed round bearing with MF25 x 1.5 mm thread. Ideal for non-alloy steels and non-ferrous metals. Packaged in an individual plastic box. Right-hand cut and bright surface.

Destornillador Cr-Molibdeno Inviolab. T-15x80

Destornillador Cr-Molibdeno Inviolab. T-15x80 2

Available

Screwdrivers

Inviolab Cr-Molybdenum Screwdriver. T-15x80

COF 09506074

€3.30

Tamper-proof torx screwdriver DIN 50150, Comfort plus model, with measurements from T-6 to T-40 and maximum length of 27 centimeters. With a magnetic tip, components and parts will not be lost. You can save a lot of time on screw insertion. The handle has a non-slip and comfortable grip. Made of chrome vanadium and molybdenum steel with the chrome rod...

PACK 4 PINZAS MICROFIX CON RESORTE. DE APLICACIÓN UNIVERSAL. ESPECIALMENTE ADECUADO PARA LA FABRICACIÓN DE MAQUETAS. ADAPTACION

Available

Screwdrivers

Wolfcraft Microfix Spring Forceps (Pack 4) (3432000)

EDM 82703

€6.03

Pack of 4 spring-loaded microfix clips. universally applicable. especially suitable for model making. Optimal adaptation to the piece through mobile jaws. Clamping width: 30mm. wolfcraft Pack of 4 microfix spring clamps Universal application, ideal for model making Movable jaws for adaptation optimal to the piece Clamping width of 30mm Brand: Wolfcraft

Erizo-LDBMCB8-Lima de mecánico media caña basta de 8" con mango bimaterial y colgador

Available

Files

Erizo LDBMCB8 8" mechanic's file with bi-material handle and hanger

TUR LDBMCB8

€10.06

Erizo-LDBMCB8-8" half-round mechanic's file with bi-material handle. Ideal for filing flat and concave surfaces, it features a double-cut design on both sides and a soft-grip handle for greater comfort during use.

Osborn-0002613361-Cepillo taza inox de alambre ondulado con tuerca M14 y filamento Ø 0.30 mm (60x20 )

Osborn-0002613361-Cepillo taza inox de alambre ondulado con tuerca M14 y filamento Ø 0.30 mm (60x20 ) 2

Available

Brushes / Bonets / Rubber Plates

OSBORN stainless steel wire cup brush with 0.30 mm filament and M14 nut 60x20 mm

TUR 0002613361

€17.47

Osborn crimped wire cup brush with M14 nut and 0.30 mm diameter filament (60x20). Ideal for deburring, stripping, and cleaning large and small surfaces. Designed for light to medium-duty work, it offers efficient and long-lasting performance.

Osborn-0002505142-Cepillo circular acero de alambre ondulado con vástago de 6 mm y filamento de Ø 0.20 mm (60x18x15 )

Osborn-0002505142-Cepillo circular acero de alambre ondulado con vástago de 6 mm y filamento de Ø 0.20 mm (60x18x15 ) 2

Available

Brushes / Bonets / Rubber Plates

OSBORN circular brush made of corrugated steel wire, 6 mm shank, Ø 0.20 mm.

TUR 0002505142

€6.61

Circular steel wire brush with a 6 mm shank and 0.20 mm diameter filament. Ideal for working in hard-to-reach areas, suitable for straight grinders. Perfect for deburring, cleaning, and polishing at various intensities.

Ruko-271008F-Perfilador de rosca DIN 2174 HSSE-Co 5 TiAIN, rectificado tipo D Rosca M 8

Available

Threading taps

RUKO HSSE-Co 5 TiAIN thread profiler, M8, type D grinding, DIN 2174.

TUR 271008F

€33.09

The Ruko-271008F thread profiler, with TiAIN coating, is ideal for alloy and non-alloy steels, as well as non-ferrous metals. Its design prevents chip formation and ensures precision in long production runs. Packaged in a plastic case.

Ruko-271004F-Perfilador de rosca DIN 2174 HSSE-Co 5 TiAIN, rectificado tipo D Rosca M 4

Last units

Threading taps

RUKO HSSE-Co 5 TiAIN thread profiler, M4, type D grinding, DIN 2174.

TUR 271004F

€28.87

The Ruko-271004F thread profiler, with TiAIN coating, is ideal for alloy and non-alloy steels, as well as non-ferrous metals. Its design prevents chip formation and ensures accuracy in long production runs. Packaged in a plastic case.

Available

Screwdrivers

Set of 4 Hooks 722-4-1 Irimo

EDM 20425

€12.79

Set of 4 Hooks 722-4-1 Irimo They are used to install or remove springs and O-rings, clean grooves, etc. Includes: straight spout, angled hook, full hook and 90° hook. Soft two-component handle for greater comfort. Length 170mm. Carbon steel blade and tempered tips for greater durability.

Erizo-LCE4-Lima de mecánico cuadrada entrefina 4"

Available

Files

ERIZO square medium-fine mechanical file 4" - resistant material and long-lasting...

TUR LCE4

€5.35

Erizo-LCE4 - 4" Medium Square Mechanic's File, ideal for filing keyways and right-angle openings. Its square section tapers towards the tip and features double cuts on all four sides. Two inches shorter than the flat file.

Ruko-242165-Porta cojinetes DIN 225 (16 x 5 mm)

Last units

Threading taps

RUKO DIN 225 bearing housing, 16 x 5 mm, high precision and durability.

TUR 242165

€11.06

Ruko-242165 DIN 225 (16 x 5 mm) bearing holder designed for closed and grooved threaded bearings. Made of steel with a screw-on handle and cast body. Includes 5 fixing screws and comes in an individual plastic box.

Ruko-126050-Corona perforadora HSS-Co 8 bimetal con dentado fino (Ø 50 mm)

Available

Hole saws and core cutters

RUKO 50mm HSS-CO core drill bit with fine teeth and durable bimetal.

TUR 126050

€16.63

The Ruko-126050 HSS-Co 8 bi-metal 50mm core drill bit features fine teeth and a cutting depth of 38mm. Ideal for alloy steels, stainless steels, and non-ferrous metals. Coolant use is recommended.

Broca Profesional Para Muros Mango Hexagonal 1/4 7 Mm

Last units

Drills

Professional Wall Drill Bit Hexagonal Handle 1/4 7 mm

COF 09775007

€3.39

1/4" hexagonal shank wall drill bit, with double-cut tip welded at 1100ºC. Applications: Rotation and percussion in concrete, brick, stoneware, ceramics and marble.mm: 7

Available

Screwdrivers

Ph-3x150 Cr-Molybdenum Screwdriver

COF 09506006

€4.66

Phillips screwdriver DIN ISO 8764-1 Comfort plus model, with measurements from PH-0 to PH-3 and maximum length of 27 centimeters. With a magnetic tip, components and parts will not be lost. You can save a lot of time on screw insertion. The handle has a non-slip and comfortable grip. Made of chrome vanadium and molybdenum steel with the chrome rod that...

Erizo-LDBRE10-Lima de mecánico redonda entrefina de 10" con mango bimaterial y colgador

Available

Files

ERIZO round file with 10" bi-material handle and hanger for mechanical use

TUR LDBRE10

€10.22

Erizo-LDBRE10 - 10" Medium Round Mechanic's File with Bi-Material Handle and Hanger. Ideal for filing holes and concave surfaces, its circular section tapers towards the tip, offering a soft and comfortable grip during use.

1
…
685
686
687
…
1103

Product added to wishlist