List of products by brand Italsan

Showing 241-264 of 444 item(s)

Available

Faucets area and stopcocks

ITAL NRSPP 20

NIRON sphere passing valve with a nominal diameter of 20 mm. Body made of PP-R blue polypropylene and inner nickel-plated brass dial. The connection to the pipe is made by thermofusion welding socket type, ensuring a monolithic and safe connection in plumbing facilities.

Available

Faucets area and stopcocks

NIRON 50 mm PP-R Sphere Ball Valve

ITAL NRSPP 50

€142.78

NIRON sphere passing valve with nominal diameter of 50 mm. Body made of PP-R blue polypropylene and inner nickel-plated brass dial. Connection by thermofusion welding socket type, ensuring the structural integrity of the bonding in fluid installations.

Available

Faucets area and stopcocks

NIRON 40mm PP-R Sphere Stop Valve

ITAL NRSPP 40

€99.09

NIRON sphere passing valve with nominal diameter of 40 mm. Body made of PP-R blue polypropylene and inner nickel-plated brass dial. Socket type thermofusion welding connection, designed to ensure structural integrity in cold water installations.

Available

Faucets area and stopcocks

PP-R NIRON 32 mm Ball Stop Valve

ITAL NRSPP 32

€46.88

32 mm NIRON sphere passing valve for PP-R systems. Body made of blue polypropylene and nickel-plated brass dial. Socket type thermofusion welding connection, ensuring an airtight and safe monoblock connection in pipe installations.

Available

Faucets area and stopcocks

NIRON 25 mm Extractable Ball Stop Valve

ITAL NRS 25

€48.32

NIRON Full Removable Dial Passive Key with nominal diameter of 25 mm. It incorporates socket type thermofusion connection that integrates the accessory and the pipe into a unique body, ensuring the tightness and safety of the bonding in polyethylene installations.

NIRON Extractable Ball Stopcock 20 mm Thermofusion

Available

Faucets area and stopcocks

NIRON Extractable Ball Stopcock 20 mm Thermofusion

ITAL NRS 20

€44.55

NIRON full removable dial passing key with a nominal diameter of 20 mm. It incorporates NRS mechanism for precise flow control. The connection is made by socket type thermofusion welding, creating a unique body that ensures the structural integrity and tightness of the bonding in pipe installations.

Available

Faucets area and stopcocks

Inlet Outlet Meter Key Set 3/4-7/8

ITAL KIT 13

€46.95

Kit of seat keys for batteries of counters with connections of 3/4" and 7/8". Includes 15 mm body entry and exit keys certified according to UNE 19804. The input uses adjustable flange and the output incorporates anti-return system with spring to control the flow.

Available

Faucets area and stopcocks

3/4" inlet outlet key kit with ferrules

ITAL KIT 15

€46.95

Seat Key Kit for water meters with 3/4 inch connections. Includes two entrance keys, two exit keys and connection sleeves. 15 mm diameter body and aluminium handle with epoxy coating. UNE certification 19804.

NIRON gasket for sleeve diameter 90 DN80

Available

Fittings and Seals

NIRON gasket for sleeve diameter 90 DN80

ITAL EGR 90

€4.44

90 mm diameter flat joint made of EPDM synthetic rubber. Designed for the sealing of flanges and headbands of the Elofit system. Its material guarantees chemical resistance and dimensional stability in industrial fluid applications, ensuring reliable sealing in DN80 connections.

Flat EPDM gasket 75 mm for Elofit flanges

Available

Fittings and Seals

Flat EPDM gasket 75 mm for Elofit flanges

ITAL EGR 75

€3.88

75 mm diameter flat joint made of black EPDM synthetic rubber. Designed specifically for the sealing of the Elofit system flanges and cable holders, ensuring sealing in industrial applications using its resistant material.

Flat EPDM gasket 63 mm for Elofit flanges

Available

Fittings and Seals

Flat EPDM gasket 63 mm for Elofit flanges

ITAL EGR 63

€3.88

63 mm diameter flat joint made of black EPDM synthetic rubber. Designed to ensure the sealing of the Elofit system in flanges and headbands, ensuring sealing in industrial connections using its resistant material.

EPDM Gasket for Sleeve Diameter 200 DN200

Available

Fittings and Seals

EPDM Gasket for Sleeve Diameter 200 DN200

ITAL EGR 200

€16.11

200 mm diameter flat joint made of black EPDM synthetic rubber. Designed to ensure the sealing of the Elofit system in flanges and flanges, ensuring the watertightness of DN200 connections through its weatherproof and aging-resistant composition.

Available

Fittings and Seals

EPDM Gasket 160 mm for DN150 Spigot

ITAL EGR 160

€10.04

160 mm diameter flat joint made of black EPDM synthetic rubber. Designed for the sealing of flanges and covers within the Elofit system, guaranteeing the sealing of DN150 connections through its chemical and thermal resistance.

NIRON EPDM Gasket 110 mm for Flanges DN100

Available

Fittings and Seals

NIRON EPDM Gasket 110 mm for Flanges DN100

ITAL EGR 110

€5.20

NIRON 110 mm diameter flat joint made of EPDM synthetic rubber. Designed for the hermetic sealing of the Elofit system in flanges and flanges, ensuring watertightness in fluid installations through its resistant composition and flat design.

Blue PP branch saddle 63-75 mm outlet 25 mm

Available

Fittings and Seals

Blue PP branch saddle 63-75 mm outlet 25 mm

ITAL NGS256375

€3.22

Derivation graft for tubes from 63 to 75 mm with 25 mm output. Made of blue polypropylene, it is installed by thermofusion welding type socket. This method guarantees a monolithic and watertight connection between the accessory and the pipe, ensuring the structural integrity of the hydraulic system without risk of leakage in the connection.

Blue PP heat fusion spigot 40-50 mm with 3/4 female thread outlet

Available

Fittings and Seals

Blue PP heat fusion spigot 40-50 mm with 3/4 female thread outlet

ITAL NGSF 344050

€16.38

Female thread graft for 40-50 mm tubes, equipped with a 25 mm hole and a 3/4" outlet. Made of blue polypropylene and brass, it is installed by thermofusion welding socket type, ensuring a monolithic and safe connection between the tube and the accessory.

Female thread graft 3/4 for 63-75 mm PP pipe

Available

Fittings and Seals

Female thread graft 3/4 for 63-75 mm PP pipe

ITAL NGSF 346375

€14.90

Female thread graft for tubes from 63 to 75 mm, equipped with 3/4 inch output and 25 mm hole. Made of blue polypropylene and brass, it is installed by thermofusion welding socket type, ensuring a monolithic and safe connection between the accessory and the pipe.

Female fusion graft 63-75 mm output 1/2" and 25 mm

Available

Fittings and Seals

Female fusion graft 63-75 mm output 1/2" and 25 mm

ITAL NGSF 126375

€12.55

Female thread graft for tubes of 63-75 mm, equipped with 1/2" output and 25 mm hole. Made of blue polypropylene and brass, it is installed by thermofusion welding socket type, ensuring a monolithic and safe connection between the accessory and the pipe.

NIRON PREMIUM PPR Socket 90/110/125mm outlet 25x1/2

Available

Fittings and Seals

NIRON PREMIUM PPR Socket 90/110/125mm outlet 25x1/2

ITAL 27NGSF1290110125L

€14.73

NIRON PREMIUM RA7050 PPR polypropylene socket for fusion welds. Compatible with 90, 110, or 125 mm pipes and 25x1/2" outlet. Grey finish, designed for pressurized plumbing installations, ensuring watertightness and flow continuity in water distribution systems.

Blue PP branch saddle fitting 90 110 125 mm outlet 20 mm

Available

Fittings and Seals

Blue PP branch saddle fitting 90 110 125 mm outlet 20 mm

ITAL NGS2090110125

€3.22

Derivation graft for tubes of 90, 110 and 125 mm with 20 mm output. Made of blue polypropylene, it is installed by thermofusion welding socket type, ensuring a monolithic bond and watertight in hydraulic systems.

PPR Graft Niron Premium 63/75mm outlet 25x3/4

Available

Fittings and Seals

PPR Graft Niron Premium 63/75mm outlet 25x3/4

ITAL 27NGSF346375L

€16.83

PPR NIRON PREMIUM graft with 63/75 mm inlet and 25x3/4" threaded output. Designed for welded plumbing connections, it guarantees watertightness and chemical resistance in cold and hot water installations, facilitating the adaptation of diameters in the pipeline network.

PP Tube Graft 63/75 to 25x3/4 NIRON RED Socket Weld

Available

Fittings and Seals

PP Tube Graft 63/75 to 25x3/4 NIRON RED Socket Weld

ITAL 03NGSFRED346375L

€13.02

Polypropylene graft NIRON RED to connect 63/75 mm pipes with 25x3/4" output. Designed for socket welding, it guarantees watertight plumbing facilities. Compatible with standard pressure systems, it facilitates the change of diameter in hot and cold water distribution networks.

NIRON RED PP Graft 63/75 to 25x1/2" Welding

Available

Fittings and Seals

NIRON RED PP Graft 63/75 to 25x1/2" Welding

ITAL 03NGSFRED126375L

€10.65

Polypropylene graft NIRON RED for socket welding, designed to connect 63 mm or 75 mm pipes with a 25x1/2" output. This plumbing accessory allows the secure and watertight connection between different diameters, facilitating installation in hot or cold water distribution systems by thermofusion.

Polypropylene Graft NIRON RED 40/50 mm outlet 25x3/4" socket welding

Available

Fittings and Seals

Polypropylene Graft NIRON RED 40/50 mm outlet 25x3/4" socket welding

ITAL 03NGSFRED344050L

€13.92

Polypropylene graft NIRON RED for 40/50 mm pipes with 25x3/4" output. Designed for socket welding, it allows watertight drifts in plumbing facilities. Compatible with standard pressure systems and professional thermofusion mounting.