List of products by brand Italsan

Showing 433-444 of 444 item(s)

Hexagonal male thread type B NIRON 50 mm

Available

Fittings and Seals

Hexagonal male thread type B NIRON 50 mm

ITAL NRFM 50112

NIRON type B hexagonal male thread link for 50 mm pipes. It incorporates 1.1/2 inch thread and is bonded by socket type thermofusion welding. This configuration guarantees a monolithic connection, ensuring the structural integrity and tightness of the driving system in technical installations.

NIRON 90 mm blue polypropylene heat fusion plug

Out of stock

Fittings and Seals

NIRON 90 mm blue polypropylene heat fusion plug

ITAL NCC 90

€26.83

NIRON plug 90 mm in diameter made of blue polypropylene. Its installation by socket type thermofusion welding creates a monolithic bond that guarantees watertightness and structural integrity in pipe systems.

Ver producto

PP Eccentric Reducer 160/125 mm for Drainage

Out of stock

Fittings and Seals

PP Eccentric Reducer 160/125 mm for Drainage

ITAL VS0650733

€32.44

Eccentric reduction of polypropylene copolymer triple layer with intermediate mineral reinforcement. Diameters from 160 to 125 mm for waste drainage at low and high temperature, ventilation and evacuation of rainwater by gravity in technical sanitation and drainage facilities.

Ver producto

PPR Reducer 110-90 mm NIRON PREMIUM Socket Welding Grey

Out of stock

Fittings and Seals

PPR Reducer 110-90 mm NIRON PREMIUM Socket Welding Grey

ITAL 27NR11090

€41.70

PPR NIRON PREMIUM reduction from 110 to 90 mm for fusion welding. Model RA7050 in grey color, designed to connect pipes of different diameter in plumbing installations, ensuring an airtight bond and compatible with standard polypropylene systems.

Ver producto

Out of stock

Fittings and Seals

PE100 transition fitting 32x1" brass

ITAL ERFM 321

€33.77

Transitional Rack SDR11 with PE100 polyethylene body and brass male threaded terminal. Nominal diameter of 32 mm and 1 inch thread. Nominal pressure of 16 bar. Compatible with the Elofit system for transporting water and chemical fluids under pressure, operating between -40 and 40 degrees Celsius.

Ver producto

Long PE100 SDR11 pipe clamp holder 110 mm 16 bar

Out of stock

Fittings and Seals

Long PE100 SDR11 pipe clamp holder 110 mm 16 bar

ITAL ECRT 110

€18.60

Long polyethylene PE100 SDR11 holder with nominal diameter of 110 mm and pressure of 16 bar. It belongs to the Elofit system and complies with the UNE-EN ISO 12201 standard. Suitable for drinking water, brackish, sea, waste and chemical fluids, operating between -40 and 40 degrees Celsius in pressure installations.

Ver producto

Out of stock

Fittings and Seals

PE100 Electrofusion Sleeve 110 mm SDR11

ITAL EME 110

€18.44

Electrosoldable PE100 polyethylene sleeve with nominal diameter of 110 mm and SDR11 ratio. Designed for a rated pressure of 16 bar, this accessory guarantees a hermetic bond by electrofusion. It belongs to the Elofit system, certified according to the UNE-EN ISO 12201 standard, and is suitable for the transport of drinking water, brackish water, waste...

Ver producto

Out of stock

Fittings and Seals

PPR 75mm Socket Welding Sleeve Grey

ITAL 27NMAN75

€11.86

NIRON PREMIUM 75 mm sleeve made of polypropylene PPR. It incorporates type A matrix and weld socket connection. Grey finish, reference RA7050. Designed for watertight connections in plumbing facilities with polypropylene pipes, guaranteeing hydraulic integrity in domestic or industrial applications.

Ver producto

Out of stock

Fittings and Seals

PPR 110 mm Sleeve Type A Matrix Grey

ITAL 27NMAN110

€33.24

NIRON PAUL PREMIUM RA7050 110 mm in polypropylene PPR. Type A matrix for socket welding, grey color. Designed for watertight connections in hot and cold water installations, ensuring structural integrity and compatibility with standard pipes.

Ver producto

PE100 female transition fitting brass 75 mm 16 bar

Out of stock

Fittings and Seals

PE100 female transition fitting brass 75 mm 16 bar

ITAL ERFF 75212

€135.02

SDR11 transition rack with straight end threaded female in brass, made of high density PE100 polyethylene. It has a nominal diameter of 75 mm and a working pressure of 16 bar, complying with the UNE-EN ISO 12201 standard.

Ver producto

90 Degree Weldable Elbow PE100 110 mm SDR11

Out of stock

Fittings and Seals

90 Degree Weldable Elbow PE100 110 mm SDR11

ITAL EGEM 110

€56.87

90 degree electrosoldable elbow made of PE100 polyethylene with a nominal diameter of 110 mm. It has an SDR11 ratio and supports nominal pressure of 16 bar. Designed for Elofit systems, it allows watertight connections by electrofusion in water and chemical fluid transport facilities under variable pressure and temperature conditions.

Ver producto

Electrofusional elbow PE100 110 mm 45 degrees SDR11

Out of stock

Fittings and Seals

Electrofusional elbow PE100 110 mm 45 degrees SDR11

ITAL ECEM110

€63.33

45 degree electrosoldable elbow made of PE100 polyethylene with a nominal diameter of 110 mm. It has a diameter to thickness ratio SDR11 and supports a nominal pressure of 16 bar. It is designed for Elofit pipe systems, complying with UNE-EN ISO 12201.

Ver producto