PIR surface detector with motion sensor via Wi-Fi

The surface detector with motion sensor via Wifi is an intelligent device that allows you to maintain control of your home effectively and without complications. Compatible with smartphones, Alexa and Google Home, this detector is easy to install and configure, allowing you to control motion detection from anywhere at any time.

The detector features a polycarbonate material Adjustable, with a maximum detection range of 7m and a detection angle of 110º, which allows you to cover a wide area of your home. The detector works with a CR123 3V battery included (replaceable), which gives it autonomy and versatility in its use. In addition, its stand-by consumption is 0.102mW, which makes it efficient in the use of energy.

The detector does not need a Hub, which means that you can use it independently and without the need for other devices. Installation is easy and simple, either with adhesives or screws, and it supports the creation of different scenes, allowing you to customize its operation according to your needs.

The detector has notifications of notice and 2.4GHz Wi-Fi, allowing you to receive real-time alerts on any movement detected in your home. In addition, its IP50 makes it resistant to dust and humidity.

• Detection radius: Max. 7M (<24ºC)
• Power supply: 5V/1A
• Detection angle: 110º
• Ambient light: <3-2000lux (Reg.)
• On time: Min. ±2' Max. ±1”
• Adjustable: Yes
• Intensity: 120-130mA
• Stand-by consumption: 0.102mW
• Works with: 1 CR123 3V battery included
• Replaceable battery: Yes
• Battery life: approx. 2500 times. (depending on the type of battery used)
• Installation: With adhesives or screws
• Works with: Alexa/Google Home
• Hub needed: No
• Wifi: 2.4GHz
• Creation of different scenes: Yes
• Notice: With notification
• Operating temperature: -20ºC +60ºC
• Material: Polycarbonate
• Installation height: 2.5M
• IP: IP50