SIFER BROCA 4 PASTILLAS SDS-PLUS 10x160

SIFER BROCA 4 PASTILLAS SDS-PLUS 10x160

Sifer Drill Bit 4 SDS-Plus Pads 10x160

Brand: SIFER

Reference SCO 58009

Out of stock

€4.24

VAT included

SIFER 4-PIECE SDS-PLUS DRILL BIT 10x160 is a high-quality drill bit designed for drilling into hard materials such as concrete and masonry. With a diameter of 10 mm and a length of 160 mm, they offer precision and durability. Ideal for professionals and DIY enthusiasts looking for optimal results in their projects.

Email address

Product Details

EAN	8435012409275
Reference	SCO 58009

Reviews (0)

No reviews

GPSR

Fabricante	Sifer
Dirección postal	Via Oscar Romero, 15, 60022 Castelfidardo (AN), Italia
Contacto electrónico	[email protected]
Teléfono	+39 717822364
Referencia	SCO 58009
EAN	8435012409275

12 other products in the same category:

ESTUCHE 5 UDS BROCA COBALTO HSS Nº8

Available

Drills

Case of 5 units. Cobalt HSS drill bits no. 8 for heavy-duty use

GIB 010234

Set of 5 HSS cobalt drill bits, size 8, designed for heavy-duty use. They offer high heat resistance and are made of high-speed steel with 5% cobalt. Their cross-shaped tip provides a non-slip grip for greater precision.

Ruko-204105-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 10,50 mm)

Last units

Drills

RUKO HSS milled helical drill bit, diameter 10.50 mm, tapered shank DIN 345.

TUR 204105

Ruko-204105 high-performance twist drill bit with tapered shank, DIN 345 type N HSS milled (Ø 10.50 mm). Ideal for drilling steel, cast iron, and alloys. High break strength and bright finish. Includes translucent plastic case.

Ruko-215015-Pack de 10 brocas helicoidales DIN 338 tipo N HSS-Co 5 Cobalto rectificada con autocentrado (Ø 1,5 mm)

Available

Drills

RUKO 1.5mm HSS-Co 5 cobalt self-centering twist drills, pack of 10.

TUR 215015

Pack of 10 DIN 338 type N HSS-Co 5 Cobalt twist drills, ground and self-centering (Ø 1.5 mm). Designed for drilling difficult materials, they offer high heat resistance and hardness. Includes a translucent plastic storage case.

Ruko-108546-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 46 mm)

Last units

Drills

RUKO HSS hollow drill bit, Weldon shank, 55 mm deep (Ø 46 mm)

TUR 108546

Ruko-108546 HSS hollow drill bit with Weldon shank, designed for pillar and floor drills. 55 mm depth and 46 mm diameter. Ideal for steel, light metals, and non-ferrous metals. Includes a translucent plastic case.

BROCA SDS PLUS QUATTRIC II 8/250/315 F549992 FISCHER. IDEAL PARA EL HORMIGON ARMADO GRACIAS A SUS CUATRO PUNTAS, GARANTIZA LOS M

Available

Drills

FISCHER SDS Plus Quattric II Drill Bit 8/250/315 F549992

EDM 96773

FISCHER SDS Plus Quattric II Drill Bit 8/250/315 F549992 Fischer SDS Plus Quattric II Drill Bit 8/250/315 F549992. Ideal for reinforced concrete thanks to its four tips. PGM certified to guarantee the best results. Centering tip to facilitate placement and prevent slipping. Four tips that prevent blockages in the concrete reinforcement. Multi-spiral...

Ruko-256050-Broca helicoidal DiN 1869 TL 3000 HSS-G extra larga (5x315 mm)

Ruko-256050-Broca helicoidal DiN 1869 TL 3000 HSS-G extra larga (5x315 mm) 2

Last units

Drills

RUKO extra long spiral drill bit HSS-G 5x315 mm DiN 1869 TL 3000

TUR 256050

The Ruko-256050 5x315 mm twist drill bit is designed for deep drilling under demanding conditions. Made of HSS-G steel, it offers high precision and is suitable for common materials. Slow drilling speeds and frequent chip removal are recommended.

Cincel Hexagonal 26x18x350

Available

Drills

Hexagonal Chisel 26x18x350

COF 09517042

Flat chisel perfect for small construction jobs. This does not have a protective handle. Available in various sizes: from 16 x 200 mm to 20 x 500 mm. It is made of high quality steel and has a gold paint coating that makes it resistant to corrosion. It is used for processing brick, stone or masonry; It can also be used in construction, decoration,...

Broca Hssco Din338n Mango Reducido 19

Available

Drills

Hssco Drill Bit DIN338n Reduced Shank 19

COF 09741900R

HSS-CO DIN 338N Drill Bit with "Reduced Handle"Length [mm]: 21 Diameter [mm]: 19

Ruko-102119T-Avellanador cónico DIN 335 forma C 90º HSS-TiN (Ø máx. 16,5 mm)

Ruko-102119T-Avellanador cónico DIN 335 forma C 90º HSS-TiN (Ø máx. 16,5 mm) 2

Available

Drills

RUKO HSS-TiN 90º conical countersink Ø max. 16.5 mm DIN 335 form C

TUR 102119T

The Ruko-102119T countersink, with a maximum diameter of 16.5 mm, is made of HSS-TiN. Designed for precise and efficient cutting of non-ferrous metals, steel, and hard plastics. Includes a translucent plastic storage case.

Ruko-102309E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 40 a 50 mm)

Ruko-102309E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 40 a 50 mm) 2

Available

Drills

RUKO HSS-Co 5 cobalt countersink Ø 40-50 mm for precise deburring.

TUR 102309E

Ruko-102309E HSS-Co 5 Cobalt Countersink/Deburring Tool, ideal for deburring metals. With a 90° countersink angle and cylindrical shank, it allows for precise cutting. Compatible with steel, cast iron, and light metals. Presented in a translucent plastic case.

Broca Sds Plus 8 Filos Cortantes Especial Para Hormigon Armado Ø 7 x 100 mm. Broca Paredes, Broca Cimientos, Broca Muros

Broca Sds Plus 8 Filos Cortantes Especial Para Hormigon Armado Ø 7 x 100 mm. Broca Paredes, Broca Cimientos, Broca Muros 2

Available

Drills

SDS Plus Drill Bit 8 Cutting Edges Special for Reinforced Concrete Ø 7 x 100 mm. Wall...

WOLFPACK LINEA PROFESIONAL

AFT 09089725

SDS Plus Drill Bit 8 Cutting Edges - Size: Ø 7 x 100 mm.- High-performance drill bit with 8 solid carbide cutting edges, especially suitable for drilling reinforced concrete.- Problem-free drilling of iron fittings.- Runs with minimal vibrations and rapid removal of drilling dust.- Accurate due to symmetrical head geometry.- Fast due to its quadruple...

Ruko-204140-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 14,00 mm)

Available

Drills

RUKO twist drill Ø 14 mm, conical handle DIN 345, HSS milled.

TUR 204140

Ruko-204140 high-performance twist drill bit with a tapered shank, DIN 345 type N HSS milled (Ø 14.00 mm). Ideal for drilling steel, cast iron, and alloys. High break strength, 118° cutting angle, and bright finish. Includes plastic case.

Product added to wishlist