List of products by brand Jimten

Showing 97-120 of 240 item(s)

Available

Fittings and Seals

JIMT 050601

Screwed polypropylene reduction with 3/4" female input and 1/2" male output. Designed to connect high and low density polyethylene pipes, allowing diameter changes in fluid systems. It complies with European certification standards, ensuring reliable installation and stable technical performance in industrial and domestic applications.

Female threaded cap 3/4" in polypropylene

Available

Fittings and Seals

Female threaded cap 3/4" in polypropylene

JIMT 051514

€1.42

3/4 inch female plug with threaded, made of polypropylene. It works as a compression accessory for high and low density polyethylene pipes. Its compact structure ensures tightness in fluid distribution systems, meeting the quality standards required by European certification organisations.

Available

Fittings and Seals

Female threaded cap 1/2" polypropylene

JIMT 051510

€1.08

1/2" threaded female stopper made of polypropylene. It works as a compression accessory for closing high and low density polyethylene pipes. Its installation is simple and meets European certification standards, ensuring a reliable connection in fluid systems.

Threaded sleeve 3/4" polypropylene for PE pipes

Available

Fittings and Seals

Threaded sleeve 3/4" polypropylene for PE pipes

JIMT 050304

€2.41

3/4" threaded sleeve made of polypropylene, designed as a compression accessory for the connection of high and low density polyethylene pipes. This component ensures a safe and hermetic bonding in fluid distribution systems, complying with European certification standards for technical installations.

Threaded sleeve 1/2" polypropylene for PE pipes

Available

Fittings and Seals

Threaded sleeve 1/2" polypropylene for PE pipes

JIMT 050310

€1.95

1/2" threaded sleeve made of polypropylene to connect high and low density polyethylene pipes. This compression accessory ensures a tight connection and meets the European certification standards of the sector.

Reduced threaded post 3/4-1/2" polypropylene

Available

Fittings and Seals

Reduced threaded post 3/4-1/2" polypropylene

JIMT 050743

€2.06

Reduced threaded male from 3/4 to 1/2 inches made of polypropylene. Designed to connect high and low density polyethylene pipes. It offers a compact and reliable installation, meeting European certification standards to ensure the integrity of the hydraulic system in industrial applications.

Reduced 1-3/4" threaded polypropylene boss

Available

Fittings and Seals

Reduced 1-3/4" threaded polypropylene boss

JIMT 050754

€2.89

Reduced sucker of 1-3/4" threaded made of polypropylene. Designed for compression connections in high and low density polyethylene pipes. It complies with European certification regulations, ensuring structural reliability and ease of installation in fluid distribution systems.

Threaded standpipe 3/4" polypropylene for PE pipes

Available

Fittings and Seals

Threaded standpipe 3/4" polypropylene for PE pipes

JIMT 050404

€2.06

3/4" threaded macho made of polypropylene, designed as a compression accessory for high and low density polyethylene pipes. It allows watertight connections in fluid distribution systems, complying with European industry certification regulations.

Threaded stand 1/2" polypropylene for PE pipes

Available

Fittings and Seals

Threaded stand 1/2" polypropylene for PE pipes

JIMT 050410

€1.82

1/2" threaded male made of polypropylene, designed as a compression accessory for high and low density polyethylene pipes. It allows watertight connections in fluid installations, complying with European certification regulations and facilitating installation in reduced spaces.

Threaded male adapter 1" polypropylene for PE pipes

Available

Fittings and Seals

Threaded male adapter 1" polypropylene for PE pipes

JIMT 050405

€2.89

1" threaded macho made of polypropylene, designed for connection of high and low density polyethylene pipes. This compression accessory allows you to make tight and secure connections, complying with European certification standards to guarantee the integrity of the channeling system in technical installations.

Available

Fittings and Seals

Male threaded cap M 3/4" polypropylene

JIMT 051504

€0.90

3/4 inch threaded male stopper made of polypropylene. It works as a compression accessory for high and low density polyethylene pipes, allowing effective closure of driving lines. Its installation is simple and complies with the regulations of the main European certification organisations in the sector.

Available

Fittings and Seals

Male threaded 2" polypropylene plug

JIMT 051503

€5.84

2-inch male stopper made of polypropylene. Designed for closing high and low density polyethylene pipes. It offers a simple installation and complies with existing European certification regulations to ensure the tightness of the distribution system.

Threaded cap M 1.1/4" polypropylene for PE pipes

Available

Fittings and Seals

Threaded cap M 1.1/4" polypropylene for PE pipes

JIMT 051506

€2.98

1.1/4" threaded male stopper made of polypropylene. Designed for closing high and low density polyethylene pipes. It complies with European certification standards, ensuring airtight sealing and reliable installation in compression systems.

Available

Fittings and Seals

Male threaded cap 1.1/2" polypropylene

JIMT 051502

€3.27

1.1/2" threaded male stopper made of polypropylene. It works as a compression accessory for high and low density polyethylene pipes. It allows the effective closure of fluid lines in industrial installations, ensuring a watertight and secure connection through its compact design and ease of installation.

Available

Fittings and Seals

Male threaded cap 1/2" polypropylene

JIMT 051501

€0.77

1/2" threaded male stopper made of polypropylene. Designed for closing high and low density polyethylene pipes. It offers a compact and reliable installation, complying with the regulations of European certification organisations for compression systems.

Available

Fittings and Seals

Male threaded cap 1" polypropylene

JIMT 051505

€1.08

1" male threaded plug made of polypropylene, designed as a compression accessory for high and low density polyethylene pipes. It allows the effective closure of driving lines, complying with the standards of the main European technical certification organisations to ensure a safe and durable connection in fluid installations.

End plug J-78 diameter 40 mm for PE pipes

Available

Fittings and Seals

End plug J-78 diameter 40 mm for PE pipes

JIMT 355107

€10.88

40 mm J-78 final plug for high and low density polyethylene pipes. Jimten brand compression system, Range 55. Compact design that facilitates installation in reduced spaces. It meets reliability standards verified by European certification organisations in the sector.

Available

Fittings and Seals

End plug J-78 diameter 25 mm

JIMT 355105

€5.64

25 mm J-78 final plug for high and low density polyethylene pipes. It belongs to the Jimten 55 compression range, validated by European certifications. Its compact structure ensures watertightness and facilitates installation in fluid distribution systems.

Available

Fittings and Seals

Central reduction tee 40-32-40 Range 55

JIMT 055117

€25.22

Compression accessory for high and low density polyethylene pipes. It allows for diameter reductions from 40 to 32 mm and returns to 40 mm. It belongs to Jimtem's 55th Range and is validated by European certification organisations.

Available

Fittings and Seals

J-73 Compression Tee 25 mm for PE Pipes

JIMT 355073

€11.37

25 mm J-73 compression tea for high and low density polyethylene pipes. It belongs to Jimten's 55th Range, meeting European certification standards. Its compact design ensures reliable watertightness in industrial and fluid systems, facilitating installation in reduced spaces with stable and safe performance.

Available

Fittings and Seals

Equal socket tee J-73 diameter 50 mm

JIMT 355086

1 Reviews

€36.82

J-73 compression tee with nominal diameter of 50 mm, designed for connection of high and low density polyethylene pipes. It belongs to the Jimten 55 Range, offering a simple and reliable installation for fluid distribution systems in technical installations.

Available

Fittings and Seals

J-73 Compression Tee 40 mm

JIMT 355075

€25.22

J-73 compression tee with nominal diameter of 40 mm, designed for connection of high and low density polyethylene pipes. It belongs to the Jimten 55 Range, outstanding for its compact design and technical reliability in fluid distribution systems.

32mm to 1" faucet elbow compression Gama'55

Available

Fittings and Seals

32mm to 1" faucet elbow compression Gama'55

JIMT 055139

€16.17

Tape elbow from 32 mm to 1" from Jimten's range of Gama'55. Designed for high and low density polyethylene pipes, it uses compression system. Its installation is compact and reliable, validated by European certification bodies to ensure watertight fluid systems.

Compression elbow tap 25-3/4" Gama'55 755077

Available

Fittings and Seals

Compression elbow tap 25-3/4" Gama'55 755077

JIMT 755077

€11.98

Compression elbow for high and low density polyethylene pipes, with connection from 25 mm to 3/4". It belongs to Jimten's Fitting Gama'55 series. Its compact design facilitates installation in small spaces, complying with European certifications to ensure reliability in industrial and domestic fluid distribution systems.