List of products by brand FACOM

Showing 1-36 of 54 item(s)

1/4 in. Socket and Bit Set, 38 Pieces with Ratchet

Last units

Socket Wrench Sets

1/4 in. Socket and Bit Set, 38 Pieces with Ratchet

EDM 19177

38-piece set of 1/4-inch drive sockets and bits. Includes a ratchet, 10 metric sockets from 5.5 to 14 mm, and 21 bits of 25 mm. Features extensions, a universal joint, and a compact case with quick tool selection.

Available

Scissors

Universal multi-purpose scissors with straight serrated blade

EDM 19176

€33.58

Straight cut universal scissors with high-precision striated leaves that prevent sliding. They incorporate two adjustable opening positions, with opening of sheets from 29 to 36 mm and handle from 77 to 102 mm. They include secure locking system in closed position and non-slip bimaterial pods.

Angled multi-purpose shears with 2 opening positions

Available

Scissors

Angled multi-purpose shears with 2 opening positions

EDM 19175

€36.89

Universal scissor edged with high precision striated leaves to avoid slips. It offers two adjustable opening positions, with ranges from 29 to 36 mm in sheets and 77 to 102 mm in handle. Includes safety locking system and non-slip bimaterial pods.

Available

Scissors

Ergonomic Multi-Purpose Stainless Steel Scissors for Right-Handed Users

EDM 19174

€48.82

Multipurpose scissors designed for skill, equipped with burnished stainless steel blades and ergonomic bimaterial grip. They allow cutting thick cardboard, 0.2 mm aluminum, rubber and 3 mm leather, as well as rope, offering precision and control in industrial and manual cutting tasks.

Hacksaw frame for metals 300 mm with 80 kg tension

Available

Saw Frames and Accessories

Hacksaw frame for metals 300 mm with 80 kg tension

EDM 19172

€40.56

Compact saw arch for metals made of steel and impact-resistant resin. It incorporates an 80 kg blade tension system and allows precise cuts in positions of 45° and 90°. It is compatible with standard sheets of 300 mm length.

Manual riveter with 4 nozzles and opening spring

Available

Riveters

Manual riveter with 4 nozzles and opening spring

EDM 19171

€45.10

Manual riveter with four interchangeable nozzles of 2.4, 3.2, 4 and 4.8 mm. Includes a changing key and automatic opening spring. Maximum riveting capacity in steel up to 4 mm and in aluminum up to 5 mm. Handle equipped with a retention clip for safe and orderly storage.

8-Compartment Organizer with Removable and Divisible Compartments 42.2 x 10.6 x 33.5 cm

Available

Toolboxes and Carts

8-Compartment Organizer with Removable and Divisible Compartments 42.2 x 10.6 x 33.5 cm

EDM 19169

€55.09

Organizer of 8 removable and divisible compartments up to 10 spaces. Includes transparent polycarbonate cap that blocks the interiors during transport. Its dimensions are 42.2 x 10.6 x 33.5 cm, allowing efficient management of storage space.

Folding cable stripping knife 77 mm steel blade

Available

Knives/ Punches/ Needles

Folding cable stripping knife 77 mm steel blade

EDM 19168

€57.50

Folding blade for peeling cables with 77 mm polished stainless steel blade, partially smooth and toothed with retention notch. Incorporates bimaterial handle, quick opening system with one hand and lock-back security lock. Includes vertical nylon sheath with fastening for belt, universal hook and rear clip.

Toukan electrician's pocket knife 2 blades lock-back

Available

Knives/ Punches/ Needles

Toukan electrician's pocket knife 2 blades lock-back

EDM 19167

€44.61

Toukan electrician penknife with plastic handle and two steel blades. It includes a straight 65 mm sheet with concave emptying and a curved 35 mm sheet for cables. Both have lock-back locking system.

Set of 9 Hex Keys with Locking Mechanism

Available

Allen Wrenches

Set of 9 Hex Keys with Locking Mechanism

EDM 19165

€39.85

Set of nine hexagonal keys made of carbon steel and silicon. They incorporate locking system with quick extraction Easy Lock System. It includes metric measurements of 1.5 to 10 mm, presented in a compact case with clear identification of each piece for easy technical use.

Set of 9 Long Ball-End Hex Keys 1.5-10 mm

Available

Allen Wrenches

Set of 9 Long Ball-End Hex Keys 1.5-10 mm

EDM 19164

€46.16

Set of nine long spherical tip hexagon keys made of high strength silicon steel. They allow a working angle of up to 15 degrees and cover metric measurements from 1.5 to 10 millimetres.

Last units

Combination Wrenches

72-tooth ratcheting combination wrenches, 10-piece set

EDM 19163

€359.37

Set of ten metric ratchet combined keys, model 467 with 72-tooth mechanism. Includes calibres from 8 to 19 mm and compact support. They present OGV profile, ring stopper and 15 degree angled head to improve manoeuvrability in reduced spaces.

Last units

Combination Wrenches

OGV Combination Wrenches 6-24 mm, 17-piece set

EDM 19162

€249.21

Set of 17 keys combined with OGV profile in measurements of 6 to 24 mm. Presented in high density bicolor foam module, resistant to hydrocarbons and hydraulic liquids. Compatible with modular storage systems and workshop carts, facilitating organization and quick access to tools in the professional environment.

Last units

Combination Wrenches

Set of 12 slim combination wrenches 8-19 mm with stand

EDM 19161

€85.97

Set of 12 keys combined model 40b slim with metric measurements from 8 to 19 mm. Designed with a narrow profile to facilitate access in small spaces. Includes compact portable support that allows fast organization and safe transportation of tools during maintenance tasks.

Last units

Torx Wrenches

Set of 6 Ball-End L-Torx Wrenches T10-T40

EDM 19160

€79.93

Set of six torx keys in L with spherical tip, made of carbon steel and silicon. They allow a working angle of up to 15 degrees to access reduced spaces. It includes measures T15, T20, T25, T30 and T40, in addition to a standard T10, all stored in a compact magnetic case.

Last units

Torx Wrenches

Set of 7 spherical L-shaped Torx wrenches T10 to T40

EDM 19159

€89.76

Set of seven torx keys in spherical L made of carbon steel and silicon. Designed for safety screws, they allow a working angle of up to 15 degrees in measures T15 to T40. Includes compact magnetic case for safe storage and quick access to tools.

Short adjustable wrench 200 mm XL opening 41 mm smooth jaw

Available

Adjustable Wrenches

Short adjustable wrench 200 mm XL opening 41 mm smooth jaw

EDM 19158

€48.82

200 mm short wrench with 41 mm XL opening. It incorporates smooth gag with millimetric adjustment and chromed body. It meets NF ISO 6787, DIN 3117 and ASME B107.100 standards, optimizing ergonomics in small spaces.

Available

Allen Wrenches

Set of 6 Ball-End Hex Keys 3-8 mm

EDM 19157

€64.92

Set of six metric hexagonal keys made of carbon and silicon steel, with polished finish and phosphate coating. They incorporate spherical head that allows operating up to an angle of 30 degrees, facilitating access in reduced spaces. The P-shaped handle offers soft grip for precise torque control.

Available

Open-end Wrenches

Set of 7 double open-end wrenches, 30° offset, 6 to 19 mm

EDM 19156

€60.90

Set of seven double open-end wrenches with head tilted to 30 degrees. Includes metric measurements from 6x7 to 18x19 millimeters. Designed to offer greater accessibility and resistance in reduced spaces during mechanical maintenance and assembly of standardized components.

11-in-1 Ultra-Compact Ratchet Wrench 200 mm with 9 Sockets

Last units

Socket Wrench Sets

11-in-1 Ultra-Compact Ratchet Wrench 200 mm with 9 Sockets

EDM 19155

€124.01

Ultra compact 200 mm ratchet wrench with nine 8 to 17 mm glasses and 19 mm mouth. Incorporates one-hand actuable safety lock system to prevent decoupling.

Last units

Socket Wrench Sets

Ratchet and Socket Set 1/4 in 72 Pieces

EDM 19153

€194.82

72-piece set with a ¼-inch low-profile ratchet. Includes 13 metric hex sockets from 4 to 14 mm, 10 12-point sockets, and 6 Torx sockets. Adds 27 pin sockets, 3 extensions, a universal joint, and a sliding T-bar. Delivered in a modular case compatible with workshop trolleys.

Ratchet Wrench and Socket Set 1/2 and 1/4 in 100 Pieces

Last units

Socket Wrench Sets

Ratchet Wrench and Socket Set 1/2 and 1/4 in 100 Pieces

EDM 19152

€317.87

100-piece set with two 72-tooth ratchets in ½ and ¼ inch sizes, featuring low-profile heads. Includes hexagonal, Torx, and bit sockets, extensions, universal joints, and adapters. Stored in a modular case compatible with workshop trolleys.

Last units

Socket Wrench Sets

Ratchet and Socket Set 1/4 in 46 Pieces

EDM 19150

€312.37

46-piece set of 1/4-inch ratchet and sockets with a sealed mechanism. Includes 10 metric sockets from 5.5 to 14 mm, two extensions, and 20 screwdriver bits. Presented in a two-tone foam module compatible with workshop trolleys, with dimensions of 418 x 188 x 55 mm.

Ratchet wrench and star sockets 1/2 in, 9-piece set

Last units

Socket Wrench Sets

Ratchet wrench and star sockets 1/2 in, 9-piece set

EDM 19148

€125.09

9-piece set consisting of a ½-inch ratchet wrench and eight metric OGV-profile sockets. Features a 72-tooth mechanism with a 5-degree recovery angle and a round head with IP51 protection. Includes sizes from 8 to 19 mm to transmit high tightening torques without damaging screw heads.

1/4 in. Ratchet Wrench with 360° Swivel Handle, 7-Piece Set

Last units

Ratchet Wrenches

1/4 in. Ratchet Wrench with 360° Swivel Handle, 7-Piece Set

EDM 19146

€111.83

7-piece set including a 1/4-inch ratchet wrench with a 360-degree swivel handle. Features a quick-release mechanism for easy socket removal.

Ratcheting box wrench set, 72 teeth, 8 to 19 mm

Last units

Ratchet ring spanners

Ratcheting box wrench set, 72 teeth, 8 to 19 mm

EDM 19145

€92.02

Set of two ratcheting box wrenches with 72 teeth and a 5-degree arc swing. Includes models 64c.s1 and 64c.s2, covering 8 to 19 mm. The reversing lever is easy to reach for work in tight spaces.

Last units

Ratchet Wrenches

Ratchet and bits 1/4 in, 31 pieces

EDM 19144

€123.09

31-piece set with an ultracompact ¼-inch ratchet, lever action, and knurled head. Includes a 100 mm magnetic extension, socket adapter, and 28 screwdriver bits in flat, Phillips, Pozidriv, hexagonal, Torx, and Resistorx formats, stored in a compact bimaterial case.

300 mm adjustable wrench with quick adjustment and bimaterial handle

Last units

Adjustable Wrenches

300 mm adjustable wrench with quick adjustment and bimaterial handle

EDM 19143

€76.46

Adjustable 300 mm wrench with quick adjustment system and maximum opening of 41 mm. It incorporates anti-slip ergonomic bimaterial handle and millimeter scale engraved on the head to facilitate accurate measurement during technical use.

7-Piece Impact Tool Set with Ball-Peen Hammer

Last units

Hammers

7-Piece Impact Tool Set with Ball-Peen Hammer

EDM 19142

€197.35

Set of seven impact tools including a ball-peen hammer with a ½-inch hickory handle, a 32 mm steel mallet, a cold chisel, a 6 mm precision punch, and three long drift punches of 4, 5, and 6 mm.

ABS Tape Measure 8 m x 25 mm Class II Precision

Available

Tape Measures/ Measuring Tapes/ Flexometers

ABS Tape Measure 8 m x 25 mm Class II Precision

EDM 19141

€25.42

Flexometer 8 meters by 25 millimetres of the Red series, made of ABS. Its tape is coated with high-strength anti-reflective matt nylon and printed on both sides. It incorporates a hook with two rivets and stainless steel reinforcement plate, ensuring a class II accuracy in each measurement.

Red ABS Series Flexometer 5 m x 19 mm Class II Precision

Available

Tape Measures/ Measuring Tapes/ Flexometers

Red ABS Series Flexometer 5 m x 19 mm Class II Precision

EDM 19140

€16.92

Flexometer of 5 meters by 19 millimeters of the Red series, made of ABS. It incorporates both-sided printed tape with anti-reflective matt nylon coating. The hook has two rivets and stainless steel reinforcement plate, ensuring a class II accuracy in each measurement performed.

Red ABS Series Tape Measure 3 m x 19 mm Class II Precision

Available

Tape Measures/ Measuring Tapes/ Flexometers

Red ABS Series Tape Measure 3 m x 19 mm Class II Precision

EDM 19139

€11.16

Flexometer 3 meters by 19 millimeters with anti-reflective matt nylon tape. It features Class II precision and hook reinforced with stainless steel plate. The tape is printed on both sides to facilitate its use as a rule in technical measurements.

Grip series bi-material tape measure 8 m x 28 mm

Available

Tape Measures/ Measuring Tapes/ Flexometers

Grip series bi-material tape measure 8 m x 28 mm

EDM 19138

€36.23

Flexometer series bi-material grip 8 meters by 28 millimeters, designed for professional use. Incorporates tape with mylar coating and anti-reflective matt finish, hook with stainless steel reinforcement plate and belt clip. It offers Class II precision and impact resistance, ensuring horizontal and vertical rigidity without bending during measurement.

Grip 5 m x 28 mm bimaterial tape measure with Mylar tape

Available

Tape Measures/ Measuring Tapes/ Flexometers

Grip 5 m x 28 mm bimaterial tape measure with Mylar tape

EDM 19137

€25.11

Grip 5 meter by 28 millimetres with ergonomic bi-methane housing. It incorporates Mylar tape with anti-reflective matt finish to improve readability. Includes reinforced hook with three rivets and stainless steel plate, plus belt clip.

Last units

Screwdrivers

Set of 8 Protwist Flat and Phillips Screwdrivers in Foam

EDM 19136

€112.45

Set of 8 protwist® screwdrivers with 6 flat tips and 2 phillips. Includes measures of 3 to 8 mm and PH1/PH2 tips. Presented in high density bicolor foam module, compatible with modular storage systems and workshop trolleys.

Test screwdriver voltage detector 90-480 V, 3.5 mm tip

Available

Screwdrivers

Test screwdriver voltage detector 90-480 V, 3.5 mm tip

EDM 19135

€11.35

Screwdriver tester for ranges from 90 to 480 V, equipped with flat tip 3.5 x 100 mm. It incorporates transparent handle with light indicator and clamping clip, designed to verify the presence of electrical tension.