List of products by brand Ruko

Showing 1765-1800 of 3181 item(s)

Ruko-211083-Broca SDS-plus S4 (8 x 260 mm)

Available

Drills

RUKO 8 x 260 mm SDS-plus drill bit with S4 design for precise drilling.

TUR 211083

The Ruko-211083 SDS-plus S4 drill bit (8 x 260 mm) is designed for hammer drills with an SDS-plus connection. Made with a carbide insert (Widia) and reinforced core, it offers stability and reduces vibration. Ideal for drilling granite, concrete, stone, and brick.

Ruko-214025-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 2,5 mm)

Ruko-214025-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 2,5 mm) 2

Available

Drills

RUKO HSS self-centering twist drills, Ø 2.5 mm, pack of 10 units.

TUR 214025

€6.36

Pack of 10 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 2.5 mm). Designed for drilling steel, cast iron, and alloys, they offer high concentricity, rotational accuracy, and efficient cutting in various materials.

Ruko-215045-Pack de 10 brocas helicoidales DIN 338 tipo N HSS-Co 5 Cobalto rectificada con autocentrado (Ø 4,5 mm)

Available

Drills

RUKO 4.5mm HSS-Co 5 cobalt twist drills, pack of 10 units.

TUR 215045

€18.88

Pack of 10 DIN 338 type N HSS-Co 5 Cobalt twist drill bits, Ø 4.5 mm. Made of high-speed steel with cobalt, they offer high heat resistance and hardness. Ideal for drilling difficult materials, with a tapered tip and right-hand cutting edge.

Ruko-250035T-Pack de 10 brocas helicoidales DIN 338 tipo N HSS-TiN rectificada con autocentrado (Ø 3,5 mm)

Last units

Drills

RUKO HSS-TiN 3.5 mm Twist Drills, Pack of 10, Type N, DIN 338, Self-Centering.

TUR 250035T

€10.29

Pack of 10 DIN 338 type N HSS-TiN twist drill bits, 3.5 mm. Made with titanium nitride, they offer faster cutting speeds and longer lifespan. Ideal for steel, cast iron, and alloys. Packaged in a translucent plastic case.

Ruko-108246-Broca hueca HSS vástago Weldon profundidad 30 mm (Ø 46 mm)

Available

Drills

HSS RUKO hollow drill bit, Weldon shank 30 mm depth, diameter 46 mm.

TUR 108246

€163.01

HSS hollow drill bit with Weldon shank, 30 mm depth and 46 mm diameter. Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Presented in a translucent plastic case.

Ruko-203050-Pack de 10 brocas helicoidales larga DIN 340 tipo N HSS fresada-rectificada (Ø 5 mm)

Available

Drills

RUKO HSS 5mm Twist Drills, Pack of 10, Long DIN 340, Milled and Ground.

TUR 203050

€35.30

Pack of 10 long twist drill bits, DIN 340 type N HSS, 5 mm diameter. Designed for deep drilling, they offer high resistance to breakage and a precise cut. Suitable for various metals and alloys. Packaged in a translucent plastic case.

Ruko-214125-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 12,5 mm)

Ruko-214125-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 12,5 mm) 2

Available

Drills

RUKO HSS self-centering twist drills, Ø 12.5 mm, pack of 5.

TUR 214125

€34.87

Pack of 5 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 12.5 mm). Designed for drilling steel, cast iron, and alloys, they offer high concentricity, rotational accuracy, and efficient cutting in various materials.

Ruko-123102-Broca SDSplus 4 puntas 10x260mm

Ruko-123102-Broca SDSplus 4 puntas 10x260mm 2

Available

Drills

RUKO SDSplus drill bit, 4 points, 10x260mm, with maximum energy transfer.

TUR 123102

€14.05

The Ruko-123102 10x260mm drill bit features four cutting edges that optimize drilling in concrete. Its design reduces vibration and friction, ensuring shorter drilling times and maximum energy transfer without risk of breakage.

Ruko-108515E-Broca hueca HSSE-Co 5 con vástago Weldon (3/4") rectificada CBN profundidad de corte 55 mm (Ø 15,0 mm)

Available

Drills

RUKO HSSE-Co 5 hollow drill bit with 3/4" Weldon shank and 55 mm cutting depth

TUR 108515E

€71.98

Ruko-108515E HSSE-Co 5 hollow drill bit with 3/4" Weldon shank. Offers a cutting depth of 55 mm and a diameter of 15.0 mm. Compatible with various Ruko machines. Includes ejector pin No. 108 305 (Ø 6.35 x 102.0 mm).

Ruko-102123E-Avellanador cónico DIN 335 forma C 90º HSS-Co 5 (Ø máx. 25 mm)

Ruko-102123E-Avellanador cónico DIN 335 forma C 90º HSS-Co 5 (Ø máx. 25 mm) 2

Available

Drills

RUKO HSS-Co 5 conical countersink, maximum diameter 25 mm, shape C 90º.

TUR 102123E

€32.40

The Ruko-102123E conical countersink, with a maximum diameter of 25 mm, is made of HSS-Co 5. Designed for precise cutting of non-ferrous metals and steel, it features a 90° countersinking angle and a cylindrical shank.

Ruko-215100-Pack de 10 brocas helicoidales DIN 338 tipo N HSS-Co 5 Cobalto rectificada con autocentrado (Ø 10 mm)

Available

Drills

RUKO 10-piece set of HSS-Co 5 cobalt twist drills, Ø 10 mm DIN 338, self-centering

TUR 215100

€69.18

Pack of 10 DIN 338 type N HSS-Co 5 Cobalt twist drill bits, Ø 10 mm. Made of high-speed steel with cobalt, they offer high heat resistance and hardness. Ideal for drilling difficult materials, with a tapered tip and right-hand cutting edge.

Ruko-108517E-Broca hueca HSSE-Co 5 con vástago Weldon (3/4") rectificada CBN profundidad de corte 55 mm (Ø 17,0 mm)

Available

Drills

RUKO HSSE-Co 5 hollow drill bit with 3/4" Weldon shank and 55 mm cutting depth

TUR 108517E

€73.24

Ruko-108517E HSSE-Co 5 hollow drill bit with 3/4" Weldon shank. Designed for a cutting depth of 55 mm and a diameter of 17.0 mm. Compatible with RS10, RS20, RS25e, RS30e, RS40e, RS120, RS125e, RS130e, and RS140e machines.

Ruko-200250-Broca helicoidal DIN 338 tipo N HSS laminada con mango reducido (Ø 25 mm)

Available

Drills

RUKO HSS rolled twist drill bit Ø 25 mm, type N, reduced shank, DIN 338.

TUR 200250

€39.80

Ruko-200250 25mm twist drill bit, made of rolled HSS. Designed for drilling common materials with high tensile strength. 118° cutting angle and black vaporized surface. Includes translucent plastic case. Ideal for large diameters.

Ruko-214045-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 4,5 mm)

Ruko-214045-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 4,5 mm) 2

Available

Drills

RUKO HSS Self-Centering Twist Drills Ø 4.5 mm - Pack of 10

TUR 214045

1 Reviews

€10.61

Pack of 10 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 4.5 mm). Designed for drilling steel, cast iron, and alloys, they offer high concentricity, rotational accuracy, and efficient cutting in various materials.

Ruko-2144015-Pack de 2 brocas helicoidales DIN 338 tipo N HSS (Ø 1,5 mm)

Available

Drills

RUKO HSS Type N Twist Drills (Ø 1.5 mm) - Pack of 2 DIN 338

TUR 2144015

€2.21

Pack of 2 high-precision DIN 338 type N HSS twist drills (Ø 1.5 mm), ideal for drilling steel and alloys. They feature high concentricity, right-hand cutting, and a bright surface, guaranteeing optimal performance in common materials.

Ruko-215120-Pack de 5 brocas helicoidales DIN 338 tipo N HSS-Co 5 Cobalto rectificada con autocentrado (Ø 12 mm)

Available

Drills

RUKO 5-piece set of HSS-Co 12 mm DIN 338 self-centering twist drills

TUR 215120

€58.14

Pack of 5 DIN 338 type N HSS-Co 5 Cobalt twist drill bits, Ø 12 mm. Made of high-speed steel with cobalt, they offer high heat resistance and hardness. Ideal for drilling difficult materials, with a tapered point design and right-hand cutting edge.

Ruko-217315-Broca centradora doble DIN 333 A HSS (Ø 3,15 mm)

Available

Drills

RUKO double centering drill bit DIN 333 A HSS Ø 3.15 mm for drilling precision.

TUR 217315

€10.65

DIN 333 A HSS double centering drill (Ø 3.15 mm) designed for centering holes. It features a 60° centering angle and a 120° rake angle, with h9 tolerance and right-hand cutting. Ideal for precision applications.

Ruko-102874P-Avellanador cónico ULTIMATECUT 4S HSS RUnaTEC DIN 355 90° (Ø 10,4 mm)

Ruko-102874P-Avellanador cónico ULTIMATECUT 4S HSS RUnaTEC DIN 355 90° (Ø 10,4 mm) 2

Available

Drills

RUKO ULTIMATECUT Conical Countersink, HSS, Ø 10.4 mm, DIN 355, 90°.

TUR 102874P

€23.11

The RUKO ULTIMATECUT 4S countersink is made of HSS with a RUnaTEC coating. Designed with four cutting edges for precise and efficient countersinking. Ideal for steel, aluminum, and plastics, with a 90° angle and a 10.4 mm diameter.

Ruko-211162-Broca SDS-plus S4 (16 x 160 mm)

Available

Drills

RUKO 16 x 160 mm SDS-plus drill bit with S4 design for precise drilling.

TUR 211162

€16.01

Ruko-211162 SDS-plus S4 drill bit (16 x 160 mm) designed for hammer drills. Made with a carbide insert (Widia) and reinforced core, it offers stability and reduces vibration. Ideal for drilling granite, concrete, stone, marble, and brick.

Last units

Drills

RUKO S1 6-12 mm stepped drill bit, high-speed steel, for precise drilling.

TUR 101084P

€192.90

The Ruko-101084P-Broca S1 6-12 step drill offers 5 tools in 1, allowing for time savings of up to 75%. Its innovative design facilitates drilling in hard-to-reach places without the need to change tools or deburr.

Ruko-214106-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 10,6 mm)

Ruko-214106-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 10,6 mm) 2

Last units

Drills

RUKO HSS Self-Centering Twist Drills Ø 10.6 mm - Pack of 5

TUR 214106

1 Reviews

€27.94

Pack of 5 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 10.6 mm). Designed for drilling steel and alloys, they offer high concentricity, rotational accuracy, and efficient cutting in various materials.

Ruko-211200-Broca SDS-plus S4 (20 x 200 mm)

Available

Drills

RUKO S4 20 x 200 mm SDS-plus drill bit for drilling in concrete and masonry.

TUR 211200

€34.44

The Ruko-211200 SDS-plus S4 drill bit (20 x 200 mm) is designed for hammer drills with an SDS-plus connection. Made with a carbide insert (Widia) and reinforced core, it offers stability and reduces vibration. Ideal for drilling granite, concrete, stone, and brick.

Ruko-123162-Broca SDSplus 4 puntas 16x260mm

Ruko-123162-Broca SDSplus 4 puntas 16x260mm 2

Available

Drills

RUKO SDSplus drill bit, 4 points, 16x260mm, with maximum energy transfer.

TUR 123162

€27.95

The Ruko-123162 4-point drill bit, 16x260mm, is designed for efficient drilling in concrete. Its four cutting edges and special geometry reduce vibrations, ensuring shorter drilling times and maximum energy transfer without risk of breakage.

Ruko-214114-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 11,4 mm)

Ruko-214114-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 11,4 mm) 2

Last units

Drills

RUKO HSS self-centering twist drills, Ø 11.4 mm, pack of 5.

TUR 214114

€29.68

Pack of 5 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 11.4 mm). Designed for drilling steel and alloys, they offer high concentricity, rotational accuracy, and efficient cutting in various materials.

Ruko-108213E-Broca hueca HSS-Co 5 Cobalto vástago Weldon (Ø 13 mm)

Last units

Drills

HSS-CO RUKO 5 cobalt hollow drill bit Ø 13 mm Weldon shank

TUR 108213E

€47.18

Ruko-108213E HSS-Co 5 Cobalt Hollow Drill Bit (Ø 13 mm) with a depth of 30 mm. Designed for pillar and floor drills, ideal for high-alloy steels. Includes a translucent plastic case. Direct connection to RUKO RS 10 drills.

Ruko-108217-Broca hueca HSS vástago Weldon profundidad 30 mm (Ø 17 mm)

Available

Drills

RUKO HSS hollow drill bit with Weldon shank, 30 mm deep and 17 mm in diameter.

TUR 108217

€37.55

HSS hollow drill bit with Weldon shank, 30 mm depth and 17 mm diameter. Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Presented in a translucent plastic case.

Ruko-102314-Avellanador cónico DIN 335 forma C 90º HSS mango hexagonal 1/4" (Ø máx. 8,3 mm)

Ruko-102314-Avellanador cónico DIN 335 forma C 90º HSS mango hexagonal 1/4" (Ø máx. 8,3 mm) 2

Last units

Drills

RUKO HSS conical countersink 90º hexagonal handle 1/4" Ø max. 8.3 mm

TUR 102314

€22.77

Ruko-102314 countersink, DIN 335 form C, 90°, made of HSS with a 1/4" hexagonal shank. Ideal for non-ferrous metals, steel, and hard plastics. Optimized design for precise, vibration-free cutting. Includes a plastic case.

Ruko-214124-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 12,4 mm)

Ruko-214124-Pack de 5 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 12,4 mm) 2

Last units

Drills

RUKO HSS self-centering twist drills, Ø 12.4 mm, pack of 5 units.

TUR 214124

€34.87

Pack of 5 DIN 338 type N HSS twist drills, milled and ground with self-centering (Ø 12.4 mm). Designed for drilling steel and other materials, they offer high concentricity, rotational accuracy, and efficient cutting in various applications.

Ruko-101051H-Broca escalonada HSS con mango hexagonal 1/4" Ø 4,0-20,0 mm (9 pasos)

Available

Drills

RUKO HSS Step Drill Bit with 1/4" Hex Shank Ø 4-20 mm (9 steps)

TUR 101051H

€91.33

Ruko-101051H HSS stepped drill bit with 1/4" hex shank. Diameter range from 4.0 to 20.0 mm in 9 steps. Compatible with drills and screwdrivers with a 1/4" chuck and bit holder.

Ruko-214033-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 3,3 mm)

Ruko-214033-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 3,3 mm) 2

Available

Drills

RUKO HSS Self-Centering Twist Drills DIN 338 (Ø 3.3 mm) - Pack of 10

TUR 214033

€7.82

Pack of 10 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 3.3 mm). Designed for drilling steel and alloys, they offer high concentricity, rotational accuracy, and efficient cutting in various materials.

Ruko-211180-Broca SDS-plus S4 (18 x 200 mm)

Available

Drills

RUKO 18 x 200 mm SDS-plus drill bit for drilling in concrete and masonry.

TUR 211180

€24.76

The Ruko-211180 SDS-plus S4 drill bit (18 x 200 mm) is designed for hammer drills with an SDS-plus connection. Made with a carbide insert (Widia), it offers excellent stability and reduced vibration. Ideal for drilling granite, concrete, stone, marble, and brick.

Ruko-204235-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 23,50 mm)

Last units

Drills

RUKO HSS milled helical drill bit, diameter 23.50 mm, tapered shank DIN 345.

TUR 204235

1 Reviews

€40.85

Ruko-204235 high-performance twist drill bit with a DIN 345 type N tapered shank. Designed for drilling steel, cast iron, and alloys. Features a 118° cutting angle and a bright finish. Includes a translucent plastic case. Diameter: Ø 23.50 mm.

Ruko-102174F-Avellanador cónico DIN 335 forma C 90º HSS-TiAIN (Ø máx. 40 mm)

Ruko-102174F-Avellanador cónico DIN 335 forma C 90º HSS-TiAIN (Ø máx. 40 mm) 2

Last units

Drills

RUKO HSS-TiAIN 90º conical countersink Ø max. 40 mm DIN 335 form C

TUR 102174F

€61.61

The Ruko-102174F conical countersink, made of HSS-TiAlN, has a maximum diameter of 40 mm. Designed for efficient cutting of non-ferrous metals and plastics, it includes a translucent plastic case and allows for operation without coolant.

Ruko-108521E-Broca hueca HSSE-Co 5 con vástago Weldon (3/4") rectificada CBN profundidad de corte 55 mm (Ø 21,0 mm)

Last units

Drills

RUKO HSSE-Co 5 hollow drill bit with 3/4" Weldon shank and 55 mm cutting depth

TUR 108521E

€93.65

Ruko-108521E HSSE-Co 5 hollow drill bit with 3/4" Weldon shank. Offers a cutting depth of 55 mm and a diameter of 21.0 mm. Compatible with various Ruko machines. Includes ejector pin No. 108 305 (Ø 6.35 x 102.0 mm).

Ruko-2144125-Broca helicoidal DIN 338 tipo N HSS (Ø 12,5 mm)

Available

Drills

RUKO HSS type N twist drill bit Ø 12.5 mm - DIN 338, high precision and durability.

TUR 2144125

€10.18

DIN 338 Type N HSS 12.5 mm twist drill bit, designed for drilling in common materials. It offers high concentricity, rotational accuracy, and right-hand cutting. Ideal for steel, cast iron, and alloys. Bright surface finish and 118° cutting angle.

Ruko-204145-Broca helicoidal mango cónico DIN 345 tipo N HSS fresada (Ø 14,50 mm)

Available

Drills

RUKO HSS milled helical drill bit, diameter 14.50 mm, tapered shank DIN 345.

TUR 204145

€19.29

Ruko-204145 high-performance twist drill bit with a DIN 345 type N tapered shank. 14.50 mm diameter, suitable for drilling steel, cast iron, and alloys. High break strength, 118° cutting angle, and bright finish. Includes plastic case.