List of products by brand GENEBRE

Showing 73-96 of 350 item(s)

Brass check valve 2" PN-25/12 threaded gas

Available

Faucets area and stopcocks

Brass check valve 2" PN-25/12 threaded gas

GEN 3121 09

2-inch retention valve with H-H gas threaded ends according to ISO 228/1. Made of UNE-EN 12165 brass, it incorporates NBR gasket and stainless steel spring 18/8. It supports PN-25/12 pressures and maximum temperatures of 90 degrees, allowing mounting in any position.

Available

Faucets area and stopcocks

Check Valve 1/2" PN25 Brass Gas Thread

GEN 3131 04

1 Reviews

€16.94

1/2" retention valve PN25 made of UNE-EN 12165 brass. It incorporates NBR 65 shore closure and AISI 302 dock. Extremos with female-female gas thread according to ISO 228/1. Operating range from -20oC to 100oC. Suitable for hydraulic, heating and pneumatic installations. It allows mounting in any position, including horizontal, vertical or oblique.

Available

Faucets area and stopcocks

Brass 1/2" PN-12 Check Valve

GEN 3121 04

€8.02

1/2" Re-Ge retention valve with nominal pressure PN-12. Made of brass according to UNE-EN 12165 standard, it incorporates NBR gasket and stainless steel spring 18/8. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position within hydraulic or gas circuits.

Available

Faucets area and stopcocks

Brass Check Valve 1/4" PN-12

GEN 3121 07

€23.85

1/4" holding valve with nominal pressure PN-12, made of brass according to UNE-EN 12165 standard. It incorporates NBR gasket and stainless steel spring 18/8. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position.

Available

Faucets area and stopcocks

Brass check valve 1 1/2" gas thread H-H

GEN 3121 08

€33.88

UNE-EN 12165 brass retention valve with nominal diameter of 1 1/2". It incorporates NBR gasket and stainless steel spring 18/8. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position within the fluid system.

Available

Faucets area and stopcocks

Gas thread brass check valve 1" PN25

GEN 3131 06

€31.10

1" PN25 retention valve made of UNE-EN 12165 brass. It incorporates NBR 65 shore closure and AISI 302 dock. Extremos with female-female gas thread ISO 228/1. Working temperature range between -20oC and 100oC. Suitable for hydraulic, heating and pneumatic installations, allowing mounting in any position.

Brass check valve 1" PN-25/12 gas thread H-H

Available

Faucets area and stopcocks

Brass check valve 1" PN-25/12 gas thread H-H

GEN 3121 06

€17.29

1" retention valve made of UNE-EN 12165 brass, with nominal pressure PN-25/12. It incorporates NBR gasket and stainless steel spring 18/8. H-H gas threaded connections according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position within pipe systems.

Available

Faucets area and stopcocks

4" Brass Check Valve PN-25/12

GEN 3121 12

€52.93

4-inch holding valve with nominal pressure PN-25/12. Made of brass according to UNE-EN 12165 standard, it incorporates vulcanized NBR joint and stainless steel 18/8 spring. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90 degrees Celsius and allows mounting in any position.

Available

Faucets area and stopcocks

Guided Disc Check Valve 1.1/2" AISI 304

GEN 2440 08

€93.07

1.1/2" guided disc retention valve in AISI 304 stainless steel, with Viton seat and threaded ends according to ISO 228-1 standard. It supports a maximum working pressure of 16 bar and a temperature range between -20oC and 150oC. Not suitable for use in vacuum or fluids with excessive vibrations.

Chromium-plated brass piston pressure reducing valve 1 1/2

Available

Faucets area and stopcocks

Chromium-plated brass piston pressure reducing valve 1 1/2

GEN 3318 08

€178.05

Redux-Ge pressure reducing valve to 1 1/2" piston. Made of UNE-EN 12165 chromed brass with AISI 303 closure and EPDM joints. Extremos gas thread BSP H-H according to ISO 228/1. It supports maximum 25 bar inlet pressure and working temperature up to 130oC, ensuring stability in industrial systems.

Redux-Ge Piston Pressure Reducing Valve 1/2" PN-25

Available

Faucets area and stopcocks

Redux-Ge Piston Pressure Reducing Valve 1/2" PN-25

GEN 3318 04

€48.42

Redux-Ge pressure reducing valve to 1/2" piston with chromed brass body UNE-EN 12165. Incorporates AISI 303 stainless steel closure, zinc-plated steel spring EN-10270 and peroxidated EPDM seals. Extremos with gas thread BSP H-H according to ISO 228/1. Nominal pressure PN-25 and maximum working temperature of 130oC for hydraulic systems.

York Foot Valve 1" Brass Gas Female Thread ISO 228/1

Available

Faucets area and stopcocks

York Foot Valve 1" Brass Gas Female Thread ISO 228/1

GEN 3140 06

€16.23

1" York foot valve with female gas thread ISO 228/1 and input filter. Made of UNE-EN 12165 brass, with NBR 65 shore closure and AISI 302 dock. Operating between -20°C and 100°C, suitable for hydraulic, heating and pneumatic systems, allowing mounting in any position.

Available

Faucets area and stopcocks

Motorized 3-way brass valve 3/4" 220V

GEN 4791 05

€153.19

Three-way motorized valve with brass body and 3/4" female gas thread. Operates with two-wire 220V actuator, supporting maximum pressures of 2 bar. It incorporates manual emergency lever and automatic return spring to ensure continuity of flow in heating and air conditioning systems.

Chromed brass washer-sink mixer valve 1/2

Available

Washing Machine Taps and Hoses

Chromed brass washer-sink mixer valve 1/2

GEN 3092 04

€20.70

Mixed 1/2" valve for washing machine and wash basin, made of brass according to UNE-EN 12165 with chrome finish. It presents nominal pressure PN16, threaded gas ISO 228/1 and total step. It supports temperatures up to 100oC, offering precise flow control by steering wheel in standard domestic facilities.

Chromed Brass Hose Valve 2 Outputs 1/2x3/4x3/8

Available

Washing Machine Taps and Hoses

Chromed Brass Hose Valve 2 Outputs 1/2x3/4x3/8

GEN 3062 05 03

€24.64

Chromed brass hose valve with two independent outputs and threaded 1/2, 3/4 and 3/8 inch gas. It meets the PN-16 standard and supports temperatures up to 120°C. It incorporates ABS controls with 1/4 turn turn, eccentric locking mechanism and lateral dial for precise flow control in standard hydraulic installations.

Wafer butterfly valve DN80 GG-20 cast iron stainless steel disc 316

Available

Faucets area and stopcocks

Wafer butterfly valve DN80 GG-20 cast iron stainless steel disc 316

GEN 2109 11

€125.19

Wafer DN80 butterfly valve with GG-20 cast body and 316 stainless steel disc. Assembly between ANSI 150 and DIN PN16 flanges, sealed with EPDM. It meets UNE EN 558-1 Series 20, supporting pressures up to 16 bar and temperatures between -20 and 120 degrees Celsius.

Available

Faucets area and stopcocks

Wafer butterfly valve 2" cast iron PN16

GEN 2103 09

€74.50

2-inch wafer butterfly valve with cast iron body and zinc-plated nodular disc. Operates with manual lever, incorporates EPDM and NBR seals, and supports pressures PN-10/16 or ANSI 150 IBS up to 120 °C, complying with ISO 5211 for actuator mounting.

Wafer butterfly valve 2 1/2" PN16 cast iron

Available

Faucets area and stopcocks

Wafer butterfly valve 2 1/2" PN16 cast iron

GEN 2103 10

€90.07

2 1/2" wafer butterfly valve with cast iron body and epoxy coating. Nominal pressure PN16 and ANSI 150 rating. Zincated nodular casting disc and EPDM seat. Includes manual control with lever and ISO 5211 mounting flange for actuators.

Manual valve for sink and bidet, brass, 1 1/4 thread

Available

Siphons and Valves

Manual valve for sink and bidet, brass, 1 1/4 thread

GEN 100206 45

€19.74

Manual valve for washbasin and bidet with brass body and thread of 1 1/4". Incorporates UNE-EN 12165-compliant push-button and chromed locking nut according to EN-248. Designed for direct flow control in standard sanitary facilities, ensuring technical compatibility and durability in water closure.

Manual valve for sink and bidet click-geiser with overflow

Available

Siphons and Valves

Manual valve for sink and bidet click-geiser with overflow

GEN 100210 45

€30.09

Double function manual valve for washbasin and bidet with click-geiser system. Made of brass in accordance with UNE-EN 1982 and with chrome finish according to EN 248. It includes overflow and removable lid that facilitates access to the internal mechanism for technical maintenance.

Full port ball valve 2 pieces 3/4" stainless steel AISI 316

Available

Faucets area and stopcocks

Full port ball valve 2 pieces 3/4" stainless steel AISI 316

GEN 2014 05

€41.97

Full two-piece dial valve in AISI 316 stainless steel, diameter 3/4". Extremos threaded ISO 7-1, PTFE seats and inexpulsable stem. It supports 63 bar and temperatures from -25 to 180 °C for industrial flow control.

Full bore ball valve AISI 316 threaded ISO 7-1

Available

Faucets area and stopcocks

Full bore ball valve AISI 316 threaded ISO 7-1

GEN 2014 07

€84.98

Full two-piece dial valve in AISI 316 stainless steel with ISO 7-1 threaded ends. It incorporates fiberglass reinforced PTFE seats, inexpulsable stem and Viton's tooric joint.

Full bore ball valve 1.1/2" stainless steel AISI 316

Available

Faucets area and stopcocks

Full bore ball valve 1.1/2" stainless steel AISI 316

GEN 2014 08

€135.48

Total 1.1/2" handpiece valve made of AISI 316 stainless steel. It incorporates PTFE seats with fiberglass and inexpulsable stem. Extremos threaded according to ISO 7-1. It supports pressures of up to 63 bar and temperatures between -25 and 180 degrees Celsius, ensuring operating tightness in industrial systems.

Full-bore ball valve 1/2" PN25 chrome-plated brass

Available

Faucets area and stopcocks

Full-bore ball valve 1/2" PN25 chrome-plated brass

GEN 3033 04

€11.12

Full pass sphere valve PN25 made of chromed brass according to UNE-EN 12165. It incorporates PTFE sealing joints and ends with 1/2" male-male BSP gas thread. It supports temperatures up to 150oC and has manual steel lever control for precise flow control in standard pipe systems.