List of products by brand GENEBRE

Showing 1-24 of 350 item(s)

Horizontal single-lever kitchen faucet Genebre K8

Available

Kitchen taps

Horizontal single-lever kitchen faucet Genebre K8

SCO 79483

Genebre model K8 horizontal single-command sink tap, identified with reference code CR=61200284566. Designed for plumbing facilities, this device allows the control of the flow of water through a single handle, facilitating its use in kitchens and food preparation spaces.

Ver producto

Full port ball valve 1/4" 3-piece stainless steel

Available

Faucets area and stopcocks

Full port ball valve 1/4" 3-piece stainless steel

GEN 2025 02

€39.08

Full 3-piece dial valve with ISO 7-1 threaded. AISI 316 body, PTFE seats with fiberglass and Viton toric. It supports 63 bar and temperatures from -25 to 180 °C. Includes unexpulsable shaft and ISO 5211 mounting.

Reduced bore ball valve 1/4" stainless steel AISI 316

Available

Faucets area and stopcocks

Reduced bore ball valve 1/4" stainless steel AISI 316

GEN 2005 02

€26.03

Small one-piece dial valve with AISI 316 polished body and PTFE seats. Extremos with M-H gas thread according to DIN 2999. Nominal pressure PN-63 and thermal range from -25oC to +180oC. Manual command.

Reduced bore ball valve 1/4" DIN 2999 AISI 316

Available

Faucets area and stopcocks

Reduced bore ball valve 1/4" DIN 2999 AISI 316

GEN 2006 02

€25.03

Reduced-pass dial valve of a part with gas threaded ends according to DIN 2999. Made of AISI 316 stainless steel with PTFE seats. It supports nominal pressure PN-63 and temperatures between -25°C and 180°C. Includes manual control for flow control.

Mini ball valve 1/4" reduced port PN-16 brass

Available

Faucets area and stopcocks

Mini ball valve 1/4" reduced port PN-16 brass

GEN 3397 02

€7.71

1/4" miniature dial valve with reduced passage and threaded connections BSP. Made of chromed brass according to UNE-EN 12165, it supports pressures up to 16 bar (PN-16). Includes PTFE seats and aluminium handle, operating between -20oC and 140oC for precise flow control in hydraulic or gas systems.

Ball valve 1/2" PN-25 full port brass chrome-plated

Available

Faucets area and stopcocks

Ball valve 1/2" PN-25 full port brass chrome-plated

GEN 3034H 04

€9.39

1/2" sphere valve with total passage, made of chromed brass according to UNE-EN 12165. Includes ends with male-female BSP gas thread according to ISO 228/1 and PTFE seats. It supports a maximum working pressure of 25 bar (PN-25) and a temperature range of -20oC to 150oC.

Safety and check valve 3/4" nickel-plated brass PN-16

Available

Faucets area and stopcocks

Safety and check valve 3/4" nickel-plated brass PN-16

GEN 319405

€15.38

3/4" safety and retention valve made of nickel-plated brass according to UNE-EN 12165. It incorporates threaded ends BSP male-female according to ISO 228/1 and stainless steel springs. It operates with a maximum pressure of 16 bar (PN-16) and pre-set charging at 8 bar, covering a thermal range of -20oC to 120oC for hydraulic systems.

Safety and Check Valve 1/2" Nickel-Plated Brass

Available

Faucets area and stopcocks

Safety and Check Valve 1/2" Nickel-Plated Brass

GEN 319404

€7.22

1/2" safety valve made of nickel-plated brass according to UNE-EN 12165 standard. It incorporates ends with BSP male-female gas thread ISO 228/1 and stainless steel springs. It supports a maximum working pressure of 16 bar (PN-16) and operates in a thermal range of -20°C to 120°C.

Available

Faucets area and stopcocks

Square safety valve 3 bar 1/2" brass

GEN 3179 04

€11.48

Brass safety valve with AISI 302 spring and EPDM shutter. Shells ISO 228/1 1/2". Safety pressure 3 bar, maximum working 10 bar and temperature up to 90 °C for hydraulic systems.

Available

Faucets area and stopcocks

York Check Valve 3/8" Brass PN12

GEN 3120 03

€11.87

3/8" York retention valve with nominal pressure PN12, designed for unidirectional flow. UNE-EN 12165 brass body, polyamide 6 shutter and AISI 302 spring. It rolls female-female gas ISO 228/1, operating between -20oC and 100oC for hydraulic and pneumatic systems.

Available

Faucets area and stopcocks

York 3/4" Brass Check Valve PN12

GEN 3120 05

€16.56

3/4" York retention valve with nominal pressure PN12 and brass body UNE-EN 12165. It incorporates polyamide shutter 6, AISI 302 spring and ISO 228/1 female-female thread. Operating between -20oC and 100oC, suitable for hydraulic, heating and pneumatic installations, allowing installation in any position.

Available

Faucets area and stopcocks

York 2" Brass Check Valve PN10

GEN 3120 09

€65.24

2 inch York retention valve with nominal pressure PN10. Made of UNE-EN 12165 brass, it incorporates polyamide 6 shutter and AISI 302 spring. Extremos with female-female gas thread according to ISO 228/1. Operating range from -20°C to 100°C, suitable for hydraulic, heating and pneumatic installations, allowing mounting in any position.

Available

Faucets area and stopcocks

York 1/2" Brass Check Valve PN12

GEN 3120 04

€12.06

1/2" York retention valve in UNE-EN 12165 brass with nominal pressure PN12. It incorporates polyamide 6 shutter and AISI 302 spring. Extremos with female-female gas thread according to ISO 228/1. Working temperature range between -20oC and 100oC. Suitable for hydraulic, heating and pneumatic installations, allowing mounting in any position.

Available

Faucets area and stopcocks

York 1 1/4" Brass Check Valve PN10

GEN 3120 07

€31.10

1 1/4" York retention valve with UNE-EN 12165 brass body and PN10 rated pressure. Incorporates disc shutter in polyamide 6 and AISI 302 stainless steel spring. It works between -20oC and 100oC, allowing mounting in any position within hydraulic or pneumatic installations to ensure unidirectional flow.

Available

Faucets area and stopcocks

York 1 1/2" Brass Check Valve PN10

GEN 3120 08

€46.71

1 1/2" York retention valve in UNE-EN 12164 brass, with female-female gas thread ISO 228/1. It incorporates polyamide 6 shutter and AISI 302 spring. Operating between -20oC and 100oC, suitable for hydraulic, heating and pneumatic systems, allowing mounting in any position.

Available

Faucets area and stopcocks

York 1" Brass Check Valve PN12

GEN 3120 06

€21.02

1" York retention valve in UNE-EN 12165 brass with polyamide shutter 6. It incorporates AISI 302 dock and NBR 65 shore closure. It works between -20oC and 100oC, suitable for hydraulic, heating and pneumatic installations with installation in any position.

Available

Faucets area and stopcocks

Cromax Check Valve 1/2" AISI 304

GEN 2440 04

€38.93

1/2" guided disc retention valve in AISI 304 stainless steel. Incorporates Viton seat and threaded ends according to ISO 228-1 standard. It supports working pressures up to 16 bar and temperatures between -20°C and 150°C. Not suitable for vacuum or fluids with excessive vibrations.

Available

Faucets area and stopcocks

3/4" Brass Threaded Flap Check Valve

GEN 3185 05

€15.49

3/4" clamp type retention valve made of brass according to the UNE-EN 12165 standard. It incorporates female-female gas threads according to ISO 228/1 and metal-closing mechanism. It supports pressures of up to 12 bar and temperatures between -20oC and 200oC, designed specifically for horizontal installation in fluid installations.

Available

Faucets area and stopcocks

2" Brass Check Valve PN-10

GEN 3185 09

€69.70

2-inch clamp type retention valve made of brass according to UNE-EN 12165 standard. Incorporates threaded ends female-female gas according to ISO 228/1. It supports a maximum working pressure of 10 bar (PN-10) and operates in a temperature range between -20oC and 200oC, ensuring stable unidirectional flow in industrial circuits.

Mini brass chrome-plated ball valve 1/2" PN16

Available

Faucets area and stopcocks

Mini brass chrome-plated ball valve 1/2" PN16

GEN 3097 04

€8.14

Mini dial valve with reduced 1/2" step. Chromed brass body according to UNE-EN 12165 and PTFE seats. Extremos threaded male-female BSP according to ISO 228/1. It supports pressures up to 16 bar and temperatures between -20oC and 140oC. Includes aluminium handle for manual drive.

Hose valve two outlets 1/2x3/8x1/2 chrome brass

Available

Washing Machine Taps and Hoses

Hose valve two outlets 1/2x3/8x1/2 chrome brass

GEN 3109 04

€26.50

Hose valve with two independent outputs of 1/2x3/8x1/2" and nominal pressure PN-10. Made of chromed brass according to UNE-EN 12165, it features threaded ends gas BSP M-M according to ISO 228/1. The opening and closing mechanism uses ceramic mount, supporting a maximum operating temperature of 85°C.

Available

Faucets area and stopcocks

Wafer butterfly valve 4" PN16 cast iron

GEN 2103 12

€115.56

4-inch wafer butterfly valve with nominal pressure PN16 and ANSI 150 rating. The body is made of cast iron coated with epoxy, while the disc is zinc-plated cast iron. It incorporates EPDM elastomer seal and NBR axis torics. Includes manual control with lever and ISO 5211 flange for actuators.

Float valve 3886 without float, gas thread 3/4

Available

Buoys and floats tanks

Float valve 3886 without float, gas thread 3/4

GEN 3886 05

€61.40

3886 model float valve without integrated buoy, equipped with 3/4 inch gas thread. Designed to regulate the level of filling or emptying in tanks, allowing precise control of the flow of fluids through its external flotation mechanism.

Float valve without float, gas thread 1/2

Available

Buoys and floats tanks

Float valve without float, gas thread 1/2

GEN 3886 04

€35.78

Floating valve model 3886 without buoy, with 1/2" gas thread Designed to automatically regulate the level of filling or emptying in fluid tanks, ensuring precise flow control through its internal flotation mechanism.