Faucets

Showing 145-168 of 902 item(s)

Available

Faucets area and stopcocks

GEN 3121 07

1/4" holding valve with nominal pressure PN-12, made of brass according to UNE-EN 12165 standard. It incorporates NBR gasket and stainless steel spring 18/8. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position.

Available

Faucets area and stopcocks

Brass check valve 1 1/2" gas thread H-H

GEN 3121 08

€33.88

UNE-EN 12165 brass retention valve with nominal diameter of 1 1/2". It incorporates NBR gasket and stainless steel spring 18/8. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position within the fluid system.

Available

Faucets area and stopcocks

Gas thread brass check valve 1" PN25

GEN 3131 06

€31.10

1" PN25 retention valve made of UNE-EN 12165 brass. It incorporates NBR 65 shore closure and AISI 302 dock. Extremos with female-female gas thread ISO 228/1. Working temperature range between -20oC and 100oC. Suitable for hydraulic, heating and pneumatic installations, allowing mounting in any position.

Brass check valve 1" PN-25/12 gas thread H-H

Available

Faucets area and stopcocks

Brass check valve 1" PN-25/12 gas thread H-H

GEN 3121 06

€17.29

1" retention valve made of UNE-EN 12165 brass, with nominal pressure PN-25/12. It incorporates NBR gasket and stainless steel spring 18/8. H-H gas threaded connections according to ISO 228/1. It supports maximum temperatures of 90oC and allows mounting in any position within pipe systems.

Available

Faucets area and stopcocks

4" Brass Check Valve PN-25/12

GEN 3121 12

€52.93

4-inch holding valve with nominal pressure PN-25/12. Made of brass according to UNE-EN 12165 standard, it incorporates vulcanized NBR joint and stainless steel 18/8 spring. Extremos with H-H gas thread according to ISO 228/1. It supports maximum temperatures of 90 degrees Celsius and allows mounting in any position.

Available

Faucets area and stopcocks

Guided Disc Check Valve 1.1/2" AISI 304

GEN 2440 08

€93.07

1.1/2" guided disc retention valve in AISI 304 stainless steel, with Viton seat and threaded ends according to ISO 228-1 standard. It supports a maximum working pressure of 16 bar and a temperature range between -20oC and 150oC. Not suitable for use in vacuum or fluids with excessive vibrations.

Chromium-plated brass piston pressure reducing valve 1 1/2

Available

Faucets area and stopcocks

Chromium-plated brass piston pressure reducing valve 1 1/2

GEN 3318 08

€178.05

Redux-Ge pressure reducing valve to 1 1/2" piston. Made of UNE-EN 12165 chromed brass with AISI 303 closure and EPDM joints. Extremos gas thread BSP H-H according to ISO 228/1. It supports maximum 25 bar inlet pressure and working temperature up to 130oC, ensuring stability in industrial systems.

Redux-Ge Piston Pressure Reducing Valve 1/2" PN-25

Available

Faucets area and stopcocks

Redux-Ge Piston Pressure Reducing Valve 1/2" PN-25

GEN 3318 04

€48.42

Redux-Ge pressure reducing valve to 1/2" piston with chromed brass body UNE-EN 12165. Incorporates AISI 303 stainless steel closure, zinc-plated steel spring EN-10270 and peroxidated EPDM seals. Extremos with gas thread BSP H-H according to ISO 228/1. Nominal pressure PN-25 and maximum working temperature of 130oC for hydraulic systems.

York Foot Valve 1" Brass Gas Female Thread ISO 228/1

Available

Faucets area and stopcocks

York Foot Valve 1" Brass Gas Female Thread ISO 228/1

GEN 3140 06

€16.23

1" York foot valve with female gas thread ISO 228/1 and input filter. Made of UNE-EN 12165 brass, with NBR 65 shore closure and AISI 302 dock. Operating between -20°C and 100°C, suitable for hydraulic, heating and pneumatic systems, allowing mounting in any position.

Available

Faucets area and stopcocks

Motorized 3-way brass valve 3/4" 220V

GEN 4791 05

€153.19

Three-way motorized valve with brass body and 3/4" female gas thread. Operates with two-wire 220V actuator, supporting maximum pressures of 2 bar. It incorporates manual emergency lever and automatic return spring to ensure continuity of flow in heating and air conditioning systems.

Wafer butterfly valve DN80 GG-20 cast iron stainless steel disc 316

Available

Faucets area and stopcocks

Wafer butterfly valve DN80 GG-20 cast iron stainless steel disc 316

GEN 2109 11

€125.19

Wafer DN80 butterfly valve with GG-20 cast body and 316 stainless steel disc. Assembly between ANSI 150 and DIN PN16 flanges, sealed with EPDM. It meets UNE EN 558-1 Series 20, supporting pressures up to 16 bar and temperatures between -20 and 120 degrees Celsius.

Available

Faucets area and stopcocks

Wafer butterfly valve 2" cast iron PN16

GEN 2103 09

€74.50

2-inch wafer butterfly valve with cast iron body and zinc-plated nodular disc. Operates with manual lever, incorporates EPDM and NBR seals, and supports pressures PN-10/16 or ANSI 150 IBS up to 120 °C, complying with ISO 5211 for actuator mounting.

Wafer butterfly valve 2 1/2" PN16 cast iron

Available

Faucets area and stopcocks

Wafer butterfly valve 2 1/2" PN16 cast iron

GEN 2103 10

€90.07

2 1/2" wafer butterfly valve with cast iron body and epoxy coating. Nominal pressure PN16 and ANSI 150 rating. Zincated nodular casting disc and EPDM seat. Includes manual control with lever and ISO 5211 mounting flange for actuators.

Full port ball valve 2 pieces 3/4" stainless steel AISI 316

Available

Faucets area and stopcocks

Full port ball valve 2 pieces 3/4" stainless steel AISI 316

GEN 2014 05

€41.97

Full two-piece dial valve in AISI 316 stainless steel, diameter 3/4". Extremos threaded ISO 7-1, PTFE seats and inexpulsable stem. It supports 63 bar and temperatures from -25 to 180 °C for industrial flow control.

Full bore ball valve AISI 316 threaded ISO 7-1

Available

Faucets area and stopcocks

Full bore ball valve AISI 316 threaded ISO 7-1

GEN 2014 07

€84.98

Full two-piece dial valve in AISI 316 stainless steel with ISO 7-1 threaded ends. It incorporates fiberglass reinforced PTFE seats, inexpulsable stem and Viton's tooric joint.

Full bore ball valve 1.1/2" stainless steel AISI 316

Available

Faucets area and stopcocks

Full bore ball valve 1.1/2" stainless steel AISI 316

GEN 2014 08

€135.48

Total 1.1/2" handpiece valve made of AISI 316 stainless steel. It incorporates PTFE seats with fiberglass and inexpulsable stem. Extremos threaded according to ISO 7-1. It supports pressures of up to 63 bar and temperatures between -25 and 180 degrees Celsius, ensuring operating tightness in industrial systems.

Full-bore ball valve 1/2" PN25 chrome-plated brass

Available

Faucets area and stopcocks

Full-bore ball valve 1/2" PN25 chrome-plated brass

GEN 3033 04

€11.12

Full pass sphere valve PN25 made of chromed brass according to UNE-EN 12165. It incorporates PTFE sealing joints and ends with 1/2" male-male BSP gas thread. It supports temperatures up to 150oC and has manual steel lever control for precise flow control in standard pipe systems.

Mini ball valve 3/8" reduced bore chrome-plated brass

Available

Faucets area and stopcocks

Mini ball valve 3/8" reduced bore chrome-plated brass

GEN 3397 03

€7.71

Miniature 3/8" sphere valve with reduced passage and nominal pressure PN-16. Brass body chromed according to UNE-EN 12165 and threaded connections BSP according to ISO 228/1. It incorporates PTFE seats and aluminum handle. Operating range from -20oC to 140oC for precise fluid control in low capacity systems.

Mini ball valve 3/4" reduced bore chrome-plated brass

Available

Faucets area and stopcocks

Mini ball valve 3/4" reduced bore chrome-plated brass

GEN 3397 05

€18.02

Miniature 3/4" sphere valve with reduced passage and threaded connections BSP. Made of chromed brass according to UNE-EN 12165, it incorporates PTFE seats and aluminium handle. It supports pressures of up to 16 bar (PN-16) and temperatures between -20°C and 140°C, complying with DIN 17660 for a tight and durable closure in pipe systems.

Mini ball valve 1/2" reduced flow PN-16 brass chrome plated

Available

Faucets area and stopcocks

Mini ball valve 1/2" reduced flow PN-16 brass chrome plated

GEN 3397 04

€9.43

Miniature 1/2" sphere valve with reduced step and nominal pressure PN-16. Brass body chromed according to UNE-EN 12165, with threaded male-female BSP connections. It incorporates PTFE seats for airtight closure and aluminum handle for manual flow control in pipe systems.

3/8" Full Port Chrome Brass Ball Valve with Blue Handle

Available

Faucets area and stopcocks

3/8" Full Port Chrome Brass Ball Valve with Blue Handle

GEN 3036 03

1 Reviews

€7.78

Full 3/8" dial valve in chromed brass UNE-EN 12165. BSP male-female threaded connections ISO 228/1. Blue aluminum pigeon for cold water. Thermal range -20 to 150 °C. Maximum pressure PN-25. PTFE seats for efficient sealing.

3/4" Ball Valve, Chrome Plated Brass, PN25, Full Bore

Available

Faucets area and stopcocks

3/4" Ball Valve, Chrome Plated Brass, PN25, Full Bore

GEN 3034 05

€15.54

Full-pass PN25 sphere valve, made of chromed brass according to UNE-EN 12165. It incorporates PTFE seats and ends with 3/4" male-female BSP gas thread. It supports temperatures up to 150oC and has manual control with steel lever for flow control.

Available

Faucets area and stopcocks

Bronze ball valve 3/4 male female PN25

GEN 3038 05

€15.37

Spherical bronze valve with male-female connections of 3/4 inches. It belongs to the Prestige line and supports a nominal pressure of 25 bars. It incorporates a red popcorn to identify the opening and closing state of the flow quickly and safely in hydraulic installations.

Chromium-plated brass ball valve 3/4" gas thread PN-25

Available

Faucets area and stopcocks

Chromium-plated brass ball valve 3/4" gas thread PN-25

GEN 3034H 05

€15.54

3/4" full-pass ball valve, made of UNE-EN 12165 chromed brass. It supports a maximum working pressure of 25 bar (PN-25) and operates between -20oC and 150oC. It incorporates ends with male-female BSP gas thread conforming to ISO 228/1 and PTFE seats to ensure tightness.

Product added to wishlist