Power tools

Showing 7609-7632 of 11239 item(s)

Last units

Drills

COF 09683800

Drill with conical handle "Morse Cone" made of rectified HSS high-speed steel and 118º tip, sharp.Diameter [mm]: 38 Cone morse: 4 Total length: 349 Cut length: 200

BROCA SDS PLUS QUATTRIC II 10/390/455 F549930 FISCHER. IDEAL PARA EL HORMIGON ARMADO GRACIAS A SUS CUATRO PUNTAS, GARANTIZA LOS

Available

Drills

FISCHER SDS Plus Quattric II Drill Bit 10/390/455 F549930

EDM 96741

€30.46

FISCHER SDS Plus Quattric II Drill Bit 10/390/455 F549930 Fischer SDS Plus Quattric II Drill Bit 10/390/455 F549930. Ideal for reinforced concrete thanks to its four tips. PGM certified to guarantee the best results. Centering tip to facilitate placement and prevent slipping. Four spikes prevent blockages in the concrete reinforcement. Multi-spiral...

Bimetal Hole Saw 50mm for Metals and Wood

Available

Drills

Bimetal Hole Saw 50mm for Metals and Wood

SCO 39769

€20.07

The 50mm bimetal hole saw is designed for drilling metals, wood, and PVC. Its HSS construction ensures durability and precision in every use.

HSS-CO 5% StepCut Metal Drill Bit 4 mm with Case

Last units

Drills

HSS-CO 5% StepCut Metal Drill Bit 4 mm with Case

SCO 39747

€10.39

The HSS-CO 5% StepCut drill bit, 4 mm, is ideal for drilling metals. Its design allows for efficient cutting on curved surfaces, ensuring precision and durability with every use.

Available

Drills

Type B Spade Drill Bit for Wood 19mm.

COF 09920019

€2.15

Chrome vanadium steel flat drill bit with centering tip and 2 tips on the sides.Diameter [mm]: 19 Cutting length mm: 156

Last units

Drills

Titanium Step Drill Bit - Size: 4-12

COF 09903012

€65.61

HSS STEP COUNTERSINK TITANIUM DRILL BIT. Ground high-speed steel drill bit with two staggered cuts. Drill range: 4 - 12 Length [mm]: 69

Last units

Drills

Bi-Metal Hole Saw Steel 60mm

SCO 39770

€23.11

The 60mm bi-metal hole saw is designed for cutting metals, aluminum, wood, and PVC. Its high-speed steel construction ensures efficient and durable cutting, suitable for both professional and DIY applications.

Last units

Drills

SDS Max L-920 M-35 Wall Drill Bit

COF 098935920

€204.85

Wall drill bits, SDS MAX anchor (Three hard metal plates and 6 cutting edges) for hammer hammer. Measurements from 12mm to 45 and lengths from 340mm to 920mmDiameter [mm]: 35 Length [mm]: 920 Cut [mm]: 780 Tip: 3 Inserts and 6 cuts

Last units

Drills

Cobalt Conical Handle Drill Bit 14.5 mm.

COF 09691450

€61.01

Cobalt drill bit with conical handle "Morse Cone" made of HSS CO high-speed steel, rectified and 118º tip, sharp.Diameter [mm]: 14.5 Cone: 2 Total length: 212 Cut length: 114

Last units

Drills

Hssco Drill Bit DIN338n Reduced Shank 19

COF 09741900R

€49.30

HSS-CO DIN 338N Drill Bit with "Reduced Handle"Length [mm]: 21 Diameter [mm]: 19

PACK 25 BROCAS METAL HSS-Co DIN338 1-13 FISCHER. SU ALEACIÓN CON COBALTO LA HACE PERFECTA PARA TRABAJAR METALES DUROS COMO EL A

Available

Drills

FISCHER Drill Bits for Metal HSS-CO DIN338 Ø1-13x0.5mm - Pack 25 units 543330

EDM 96351

€143.61

FISCHER Metal Drill Bits HSS-CO DIN338 Ø1-13x0.5mm - Pack 25 units 543330 HSS-CO Metal Drill Bits DIN338 Diameter of 1-13mm with 0.5mm increments Alloy with cobalt for working hard metals such as stainless steel Pack of 25 units High resistance and durability Perfect for drilling hard materials

Ruko-108109-Adaptador para taladros de base magnética para adaptar a vástago Weldon con salida a portabrocas 108116

Available

Drills

RUKO adapter for magnetic drills with Weldon shank and 1/2" chuck

TUR 108109

€63.61

Ruko-108109 adapter for magnetic base drills, designed to convert a Weldon shank into a 108116 chuck. Compatible with Morse taper 3 and Morse taper 2 output, ideal for various drilling applications.

Ruko-102881P-Avellanador cónico ULTIMATECUT 4S HSS RUnaTEC DIN 355 90° (Ø 20,5 mm)

Ruko-102881P-Avellanador cónico ULTIMATECUT 4S HSS RUnaTEC DIN 355 90° (Ø 20,5 mm) 2

Available

Drills

RUKO ULTIMATECUT Conical Countersink, HSS, Ø 20.5 mm, DIN 355, 90°.

TUR 102881P

€39.80

RUKO ULTIMATECUT 4S tapered countersink, made of HSS with a RUnaTEC coating. Designed with four cutting edges for precise and efficient countersinking. Ideal for steel, aluminum, and plastics. 90° countersinking angle and 20.5 mm diameter.

Ruko-108212E-Broca hueca HSS-Co 5 Cobalto vástago Weldon (Ø 12 mm)

Last units

Drills

HSS-CO RUKO 5 cobalt hollow drill bit Ø 12 mm Weldon shank for high precision

TUR 108212E

€47.18

Ruko-108212E HSS-Co 5 Cobalt Hollow Drill Bit, 12 mm diameter, 30 mm depth. Ideal for pillar and floor drills. Designed for high-alloy steels, it offers greater heat resistance. Includes a translucent plastic case.

Ruko-102307E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 30 a 35 mm)

Ruko-102307E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 30 a 35 mm) 2

Last units

Drills

RUKO HSS-Co 5 cobalt countersink Ø 30-35 mm for precise deburring.

TUR 102307E

€252.53

Ruko-102307E HSS-Co 5 Cobalt Countersink/Deburring Tool, ideal for cuts from 30 to 35 mm. With a 90° angle and cylindrical handle, it facilitates deburring and prevents clogging. Suitable for steel, cast iron, and light metals. Includes a plastic case.

Available

Drills

Alpen Hss Super Drill 1.50 mm.

AFT 09085950

€2.20

Alpen Hss Super 1.50 mm drill bit.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized tip sharpening.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.Suitable for construction steels, easy-to-cut steels, non-alloy steels, copper, brass, aluminum and plastic.

Ruko-102308E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 35 a 40 mm)

Ruko-102308E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 35 a 40 mm) 2

Last units

Drills

RUKO HSS-Co 5 cobalt countersink Ø 35-40 mm for precise deburring.

TUR 102308E

€332.81

Ruko-102308E HSS-Co 5 Cobalt Countersink/Deburring Tool, suitable for diameters from 35 to 40 mm. With a 90° angle and cylindrical shank, it allows for efficient cutting and prevents clogging. Ideal for steel, cast iron, and light metals. Includes a plastic case.

Last units

Drills

Titanium Step Drill Bit. 36 - 50

COF 09901050

€182.46

HSS countersunk titanium drill bit. High speed steel drill bit ground with two flat cuts.Drill range: 36 - 50 Length [mm]: 90

Ruko-102309E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 40 a 50 mm)

Ruko-102309E-Avellanador-desbarbador HSS-Co 5 Cobalto (Ø de 40 a 50 mm) 2

Available

Drills

RUKO HSS-Co 5 cobalt countersink Ø 40-50 mm for precise deburring.

TUR 102309E

€492.03

Ruko-102309E HSS-Co 5 Cobalt Countersink/Deburring Tool, ideal for deburring metals. With a 90° countersink angle and cylindrical shank, it allows for precise cutting. Compatible with steel, cast iron, and light metals. Presented in a translucent plastic case.

Broca Para Madera Mango Hexagonal 1/4 9 Mm

Broca Para Madera Mango Hexagonal 1/4 9 Mm 2

Available

Drills

Wood Drill Bit Hexagonal Handle 1/4 9 mm

COF 09795009

€1.59

Three-point wood drill bit, with 1/4" hex handle. Made of chrome vanadium. Applications: Wood, soft wood and chipboard.mm: 9

Available

Drills

Alpen SDS Plus F8 drill bit 12.00 x 160 mm.

AFT 09089345

€21.37

Alpen SDS Plus F8 drill 12.00 x 160 mm.Measure, diameter x length: 12.0 x 160 mm.High performance drill with 4 solid carbide cutting edges, Especially suitable for drilling reinforced concrete.Problem-free drilling of iron fittings.Runs with minimal vibrations and rapid removal of drilling dust. Exact through symmetrical head geometry.

Adaptador con broca p sierra de copa 14 a 30mm sy5100

Available

Drills

Adapter with drill bit for hole saw from 14 to 30mm sy5100 MOTA

EDM 39630

€5.63

Adapter with drill bit for hole saw from 14 to 30mm sy5100 Mota Adapter with drill bit for hole saw from 14 to 30mm Brand: Mota Allows you to use hole saws of different sizes Facilitates drilling in hard materials Compatible with standard drills Strong and durable material Ideal for DIY and professional work Easy to use and install Dimensions: 14 to 30mm

Broca Hss Din 338 N Mango Reducido M-10,5

Last units

Drills

Hss Drill Bit Din 338 N Reduced Handle M-10.5

COF 09731050R

€5.81

Drills with reduced handle in high-speed steel rectified HSS DIN 338N 118º. For steel and iron. Color black Diameter [mm]: 10.5 Reduced handle diameter: 8

Ruko-102303T-Avellanador-desbarbador HSS-TiN (Ø de 10 a 15 mm)

Last units

Drills

RUKO HSS-TiN countersink for diameters from 10 to 15 mm, high precision and durability.

TUR 102303T

€93.87

The Ruko-102303T is an HSS-TiN countersink/deburring tool with a diameter of 10 to 15 mm. It features a 90° cutting angle, a cylindrical shank, and a cross-drilled cutting edge with a titanium nitride coating.

Product added to wishlist