Tools

Showing 37-72 of 27352 item(s)

Test screwdriver voltage detector 90-480 V, 3.5 mm tip

Available

Screwdrivers

Test screwdriver voltage detector 90-480 V, 3.5 mm tip

EDM 19135

Screwdriver tester for ranges from 90 to 480 V, equipped with flat tip 3.5 x 100 mm. It incorporates transparent handle with light indicator and clamping clip, designed to verify the presence of electrical tension.

Available

Screwdrivers

Set of 6 Protwist Flat and Phillips Screwdrivers

EDM 19133

€49.02

Set of six Protwist® flat screwdrivers and Phillips with triple zinc, nickel and chrome coating rod. Includes AT, ATF and ATP tips of different sizes. Ergonomic bimaterial handle resistant to chemicals, designed to increase durability and torque in assembly tasks.

Available

Screwdrivers

Set of 6 insulated screwdrivers 1000V flat and Pozidriv

EDM 19132

€56.69

Set of six Protwist® isolated screwdrivers according to EN 60900, with 1000 V AC and 1500 V DC insulation. It includes four flat tips from 2.5 to 5.5 mm and two pozidrv PZ1 and PZ2.

Available

Screwdrivers

Set of 6 Insulated Screwdrivers 1000V Protwist Flat and Phillips

EDM 19131

€56.69

Set of six Protwist® 1000 V isolated screwdrivers, VDE approved. It includes four flat ends and two Phillips. Ergonomic bimaterial handle, impact resistant, abrasion and chemicals. Round rod with insulating sheath for safe electrical work.

18 mm segmented blade utility knife with lock and auto-reload

Available

Cutter

18 mm segmented blade utility knife with lock and auto-reload

EDM 19130

€19.09

18 mm segmented blade cutter with automatic recharge and six-sheet charger. It incorporates ergonomic ABS handle, stainless steel guide, safety locking wheel and integrated blade breaker for safe professional use.

Segmented Blade Utility Knife 9x84 mm with Automatic Lock and 3 Blades

Available

Cutter

Segmented Blade Utility Knife 9x84 mm with Automatic Lock and 3 Blades

EDM 19129

€14.90

9 x 84 mm segmented blade cutter with ergonomic ABS handle and soft coating. It incorporates stainless steel blade guide, automatic safety locking system and integrated knife breaker. Includes tank with two spare blades, adding a total of three sheets.

Stackable 39 cm Tool Box with Automatic Latch

Available

Toolboxes and Carts

Stackable 39 cm Tool Box with Automatic Latch

EDM 19122

€27.89

39.4 cm plastic tool box with automatic locking system and single-hand opening latch. It incorporates high strength metal closures, folding retractable handle and removable tray. Its stackable design supports a total maximum load of 17 kg, while the individual tray supports up to 5.5 kg.

Available

Tool baskets and holders

Lightweight tool bag 43 x 17 x 18 cm

EDM 19120

€64.18

Tool bag 43 x 17 x 18 cm made of 1200 deniers fabric. It supports a maximum load of 5 kg and has double handle, shoulder adjustable strap with reinforced foam and clip type pressure closure combined with Velcro to ensure contents.

Last units

Pliers

4-Piece Pliers Set with Diagonal Cutters and Water-Pump Pliers

EDM 19118

€165.54

Set of four pliers for cutting and gripping. Includes a 160 mm diagonal cutter with a 2.0 mm capacity and 210 kg/mm² strength. Features an 180 mm combination pliers, 200 mm straight and bent nose pliers with 1.6 mm cutting capacity, and 250 mm water-pump pliers with 8 adjustment positions.

Last units

Pliers

CPE and Plier Set, 4 Pieces

EDM 19117

€265.68

Set of four CPE and pressure pliers including an adjustable 250 mm through slot, semi-round 200 mm tip, 160 mm diagonal cut and 250 mm pressure. It comes in a durable bicolor foam tray, fully compatible with the modular storage system and Facom workshop carts.

Available

Pliers

Multifunction pliers with lock 260 mm double rack

EDM 19116

€47.65

Multitomeal 260 mm with 12-position double zip system and quick adjustment button. Incorporates 62 HRC tempered jaws and self-driving tooth for a firm grip. Its opening capacity reaches 42 mm, complying with ISO 8976.

Last units

Pliers

4-Piece Mechanic's Pliers Set with PVC Handles

EDM 19115

€154.63

Set of four mechanic's pliers with ergonomic PVC handles. Includes a 160 mm diagonal cutting plier with 210 kg/mm² resistance, two 200 mm semi-round nose pliers, and a 250 mm adjustable plier with eight positions and a maximum opening of 40 mm.

Last units

Pliers

Smooth jaw pliers wrench 180 mm

EDM 19114

€80.37

Alicate 180 mm key with smooth jaws for delicate surfaces. It incorporates quick adjustment button with 13 positions and maximum opening of 43 mm. Its 14.8 mm narrow profile facilitates access in confined spaces, while the ergonomic bimaterial handles ensure a comfortable and accurate handling during technical use.

Available

Vices

Automatic clamp 250 mm forged steel

EDM 19113

€63.05

250 mm automatic pressure clamp with closing mechanism that adapts the opening to the part. It allows to adjust the pressure without modifying the distance, optimizing the work in series. Incorporates non-slip striated handle and unlock by internal lever.

Available

Pliers

Multifunction pliers 240 mm ø40 mm with 4-in-1 screwdriver

EDM 19112

€23.09

Multitomeal 170a series 240 mm with 8 adjustment positions and maximum opening of ø40 mm. It incorporates zipper and pinion system for precise adjustment, high strength self-tightening and ergonomic PVC grip. Includes 4-in-1 screwdriver compatible with 3-4 mm planes and Phillips PH0-PH1 heads.

Last units

Pliers

Set of 3 VDE insulated pliers 1000 V soft grip

EDM 19110

€145.28

Set of three VDE/EN 60900 certified isolated pliers for 1000 V, designed for electrical work. Includes diagonally cut pliers, universal and semicircular straight tip. They have ergonomic grips soft grip and maximum cutting capacities of 1.6 mm and 2.0 mm depending on the specific model.

Available

Accessories and Spare Parts

Tolsen 34kg Magnetic Angle for Welding

GIB 144912

€10.79

The 34kg Tolsen magnetic angle facilitates the quick and easy placement of welding parts. It offers 45°, 75° and 135° working angles with precision. Its construction in high quality pressed steel integrates a powerful magnet for firm clamping.

Available

Pliers

Tolsen Insulated Pliers with Semi-Round Tips and Curved Jaws, 200mm

GIB 138148

€15.75

The semi-rounded tip pliers with isolated curved mouths of the Tolsen brand measure 200 mm and are made of chrome-vanadium alloy steel. They have chemically treated blackened surface, bimaterial grips and triple layer electrolytic coating to ensure safe insulation and optimal durability during professional use in electrical installations.

Available

Sockets for socket wrenches

Tolsen 1/2'' 8mm Socket Wrench

GIB 116508

€1.71

The 1/2" TOLSEN cup key features a square 8mm conductor according to DIN 3124 and ISO 2725-1 standards. Made of 50BV30 steel with heat treatment, it guarantees structural resistance for demanding mechanical applications.

WADFOW replacement lower blade ref. 50986

Available

Blades and Belts

WADFOW replacement lower blade ref. 50986

GIB 051683

€12.48

The reference bottom blade 50986 is an original replacement for electroportiles of the brand WADFOW, identified with the code WJC1520-SP-16. Designed to maintain cutting efficiency in power tools, this part ensures the correct functioning of the cutting mechanism by replacing worn or broken components in professional and domestic equipment.

WADFOW Replacement Upper Blade Ref. 50986

Available

Blades and Belts

WADFOW Replacement Upper Blade Ref. 50986

GIB 051682

€9.09

The reference top blade 50986 is an original replacement for electroportiles of the brand WADFOW. With WJC1520-SP-16 piece code, this component ensures the correct functioning of the cutting mechanism in domestic and professional sewing machines, ensuring optimum accuracy during daily use.

Replacement Blade for Electric Shaver Ref. 50986

Available

Blades and Belts

Replacement Blade for Electric Shaver Ref. 50986

GIB 051681

€24.21

This is a reference blade assembly 50986 manufactured by the WADFOW brand. The component corresponds to code WJC1520-SP-C.T.G and is classified within the replacement subfamily for electroportables.

21-Piece Brush and Accessory Set for Power Tools WADFOW

21-Piece Brush and Accessory Set for Power Tools WADFOW 2

Available

Brushes / Bonets / Rubber Plates

21-Piece Brush and Accessory Set for Power Tools WADFOW

GIB 051668

€20.75

This set of 21 accessories for WADFOW brand electroportiles includes soft, hard and medium bristles brushes in 2 inch and 4 inch sizes with 1/4 inch hexagonal stem.

WADFOW BIM Mixed 12-Piece Jigsaw Blade Set

Available

Saw Blades

WADFOW BIM Mixed 12-Piece Jigsaw Blade Set

GIB 051667

€26.16

This WADFOW set includes 12 blades for sabre saw with BIM material. It contains three 150 mm wooden sheets with nails, four 150 mm and 225 mm for metal, and two 200 mm sheets designed to cut wooden pallets.

Set of 10 Wadfow Mixed Wood and Metal Saber Saw Blades

Available

Saw Blades

Set of 10 Wadfow Mixed Wood and Metal Saber Saw Blades

GIB 051666

€19.30

This WADFOW set (code WJT1001) contains ten sabre saw blades in individual blister presentation. Includes three pieces of 150 mm with 6 TPI in HCS for wood, three of 150 mm with 14-18 TPI in BIM for metal, two of 225 mm with 14-18 TPI in BIM for metal and two of 200 mm with 6-12 TPI in BIM for pallets. The variety of materials and teeth counts allows the...

WADFOW 300mm Sable Saw Blades for Metal 14-10TPI BIM Milling Set of 2

Available

Saw Blades

WADFOW 300mm Sable Saw Blades for Metal 14-10TPI BIM Milling Set of 2

GIB 051665

€7.77

This WADFOW two-leaf metal saw set, model WJT1225VF, measures 300 mm and has 14 to 10 teeth per inch in BIM profile optimized for milling.

Wadfow 225mm 14DPP Metal Saw Blade Set for Reciprocating Saws, 2-Pack

Available

Saw Blades

Wadfow 225mm 14DPP Metal Saw Blade Set for Reciprocating Saws, 2-Pack

GIB 051664

€5.07

The WADFOW, WJT1122BF, two-leaf saw blade set for metal has a diameter of 225mm and a density of 14 teeth per inch. Designed specifically for metal milling operations, these sheets offer optimal performance in precise cuttings.

WADFOW 225mm 18 TPI Metal Saw Blade Set for Reciprocating Saws (2-Pack)

Available

Saw Blades

WADFOW 225mm 18 TPI Metal Saw Blade Set for Reciprocating Saws (2-Pack)

GIB 051663

€4.71

This set of two saw blades for metal of the brand WADFOW measures 225 mm and has a density of 18 TPI. Designed for precise cuts in metal materials, this accessory for electroportables is delivered in blister presentation as a specialized technical spare part.

WADFOW Wood Sable Saw Blades 200mm 6-12 TPI Pack of 2

Available

Saw Blades

WADFOW Wood Sable Saw Blades 200mm 6-12 TPI Pack of 2

GIB 051662

€5.14

This WADFOW two blade saw set for wood measures 200 mm and has a tooth density of 6 to 12 TPI. Designed specifically for efficient cutting of wooden pallets, this accessory is presented in blister as part of the BIM M2+6150 electroportable tool family.

Set of 2 Wood Saw Blade Sander Blades with Nails 225mm 6TPI HCS WADFOW

Available

Saw Blades

Set of 2 Wood Saw Blade Sander Blades with Nails 225mm 6TPI HCS WADFOW

GIB 051661

€5.61

This WADFOW two-leaf sawboard set, with a WJT1111DF code, has a diameter of 225 mm and a density of 6TPI. Designed specifically for basic wood work with nails, these sheets feature HCS technology and optimized milling.

WADFOW Sable Saw Blades 240mm 5DPP-HCS Wood Cutting 2 Pieces

Available

Saw Blades

WADFOW Sable Saw Blades 240mm 5DPP-HCS Wood Cutting 2 Pieces

GIB 051660

€5.23

This set of two WADFOW wood saw blades, model WJT1531L, has a diameter of 240 mm and a density of 5 teeth per inch (5TPI). Made of HCS material, they have sharp and side teeth optimized for quick cutting in wood.

Set 2 wood saw blades WADFOW 225mm 6 TPI HCS

Available

Saw Blades

Set 2 wood saw blades WADFOW 225mm 6 TPI HCS

GIB 051659

€2.88

This set of two saw blades for WADFOW wood has a cutting diameter of 225 mm and a density of 6 TPI. Made of HCS steel with milling treatment, these sheets are specifically designed for wooden bases and are marketed in individual blister presentation under the code WJT1111D.

Set of 5 WADFOW T111C T144D T244D HCS T118A T118B HSS Saw Blades

Available

Saw Blades

Set of 5 WADFOW T111C T144D T244D HCS T118A T118B HSS Saw Blades

GIB 051658

€3.79

This set of five WADFOW saw blades, code WJB2K51, includes models T111C HCS, T144D HCS and T244D HCS for wood cutting, along with the T118A HSS and T118B HSS blades designed for metals.

Wadfow Hex Shank Wall Drill Bit 4x85 mm 2

Available

Drills

Wadfow Hex Shank Wall Drill Bit 4x85 mm

GIB 051652

€3.09

The WADFOW 4x85 mm hexagonal stem wall drill, code WMJ4K48, is designed to drill concrete, brick and blocks with smooth dust removal. Its construction allows an ultra-efficient drilling thanks to the hexagonal stem that facilitates coupling in electroportables.

Wadfow flooring installation kit with steel pull bar and nylon wedges

Wadfow flooring installation kit with steel pull bar and nylon wedges 2

Available

Tilers and Pavers

Wadfow flooring installation kit with steel pull bar and nylon wedges

GIB 051650

€11.74

WADFOW floor installation kit encoded as WFLA2401, composed of a complete set of twenty pieces designed for masonry work. The set includes a traction bar made of sturdy steel, a bump block and eighteen nylon wedges to ensure proper fixation during mounting of slabs.

WADFOW WFLA3918 Plastic PP Floor Adjustment Wedge, Pack of 20

WADFOW WFLA3918 Plastic PP Floor Adjustment Wedge, Pack of 20 2

Available

Tilers and Pavers

WADFOW WFLA3918 Plastic PP Floor Adjustment Wedge, Pack of 20

GIB 051649

€2.70

The WADFOW ground adjustment wedge, code WFLA3918, is a PP plastic accessory sold in 20-unit bag. Its main function is to create controlled spaces during the installation of floating floors.

Product added to wishlist