Plumbing

Showing 385-408 of 8453 item(s)

Compact vertical S-11 PVC siphon 1 1/4 for sink and bidet

Available

Siphons and Valves

Compact vertical S-11 PVC siphon 1 1/4 for sink and bidet

JIMT 001106

Compact S-11 vertical siphon for sinks and bidets, made of PVC with 1 1/4 inch output. Includes stopper with chain and clamping rings, optimized for installations in reduced spaces with limited height under the furniture.

Double Siphon Extensible Siphon S10 1.1/2"x70

Available

Siphons and Valves

Double Siphon Extensible Siphon S10 1.1/2"x70

JIMT 005048

€44.61

S10 extendable syphon double syphon, designed for sinks. It incorporates 70 mm diameter extendable valves and PVC stopper. It has horizontal output and dimensions of 1.1/2" x 70 mm, optimizing the space in domestic or professional plumbing facilities.

Available

Fittings and Seals

O-ring 32 mm Range 55 for PE pipes

JIMT 055054

€1.72

32 mm thoric joint for Jimten's Gama 55 fitting system. Compatible with high and low density polyethylene pipes, it ensures an airtight connection by compression. Validated by European certification organisations to ensure sealing in industrial fluid distribution systems.

Replacement gasket sleeve union 40-28/32

Available

Fittings and Seals

Replacement gasket sleeve union 40-28/32

JIMT 031296

€5.08

Replacement joint for metal tube bonding sleeves, compatible with diameters from 40 to 28/32 mm. It guarantees tight sealing of connections, preventing fluid leaks. Made of materials resistant to pressure and mechanical wear, it ensures the structural integrity of the installation in the long term.

Lower gasket for sanitation valve diameter 70 mm

Available

Fittings and Seals

Lower gasket for sanitation valve diameter 70 mm

JIMT 031025

€1.10

Lower replacement joint for drainage valves with a nominal diameter of 70 mm. It guarantees airtight sealing between mobile and fixed components, preventing leaks. Made of abrasion resistant materials and chemical waste water agents, it ensures watertightness and prolongs the service life of the mechanism in industrial or domestic facilities.

Flexible PVC Conical Gasket 1-1/4" x 32 mm

Available

Fittings and Seals

Flexible PVC Conical Gasket 1-1/4" x 32 mm

JIMT 031020

€1.03

Flexible PVC tapered joint for 32 mm tube connection. Its dimensions of 1.1/4" x 32 mm allow an airtight sealing in plumbing facilities. The flexibility of the material facilitates mounting in standard ducts, ensuring the tightness of the system without requiring special tools during installation.

Flexible PVC conical gasket 1.1/2" x 40 mm

Available

Fittings and Seals

Flexible PVC conical gasket 1.1/2" x 40 mm

JIMT 031015

€1.03

Flexible PVC tapered joint for 40 mm tubes. Measures 1.1/2" x 40 mm. It guarantees watertightness in plumbing and drainage facilities. Chemical resistant material. Accurate adaptation to the duct. Facilitates pipe connection. Technical use in evacuation systems. Secure the proper seal. Compatible with standard diameters.

PP threaded reducer 3/4" h 1/2" for PE pipes

Available

Fittings and Seals

PP threaded reducer 3/4" h 1/2" for PE pipes

JIMT 051543

€2.38

Reduction threaded male 3/4" to female 1/2" made of polypropylene. Designed to connect high and low density polyethylene pipes. It offers a compact and reliable installation, complying with European certification standards for compression systems in standard fluid applications.

Threaded reducer M 2" H 1" polypropylene

Available

Fittings and Seals

Threaded reducer M 2" H 1" polypropylene

JIMT 051524

€9.39

Reduction threaded male 2" to female 1" made of polypropylene. Designed to connect high and low density polyethylene pipes, allowing diameter changes. It complies with European certification standards for compression systems, ensuring a compact and reliable installation in standard pipe applications.

Threaded reducer M 1" H 3/4" polypropylene

Available

Fittings and Seals

Threaded reducer M 1" H 3/4" polypropylene

JIMT 051554

€2.89

Screwed polypropylene reduction with 1" male input and 3/4" female output. Designed to connect high and low density polyethylene pipes. It meets European certification standards for compression systems, ensuring a secure and compact bonding in standard channeling facilities.

Threaded reducer M 1 1/4" H 1" polypropylene

Available

Fittings and Seals

Threaded reducer M 1 1/4" H 1" polypropylene

JIMT 051565

€4.27

Reduction threaded male 1.1/4" to female 1" made of polypropylene. Designed to connect high and low density polyethylene pipes. It complies with European certification standards, ensuring reliable installation and compact design for standard compression systems in plumbing.

Threaded reducer M 1" h 1/2" polypropylene

Available

Fittings and Seals

Threaded reducer M 1" h 1/2" polypropylene

JIMT 051519

€2.89

Reduction threaded male 1" to female 1/2" made of polypropylene. Designed to connect high density and low density polyethylene pipes, offering a compact and reliable installation according to European certification standards for compression systems.

Available

Fittings and Seals

PP Threaded Reducer H 3/4" M 1/2

JIMT 050601

€2.06

Screwed polypropylene reduction with 3/4" female input and 1/2" male output. Designed to connect high and low density polyethylene pipes, allowing diameter changes in fluid systems. It complies with European certification standards, ensuring reliable installation and stable technical performance in industrial and domestic applications.

Female threaded cap 3/4" in polypropylene

Available

Fittings and Seals

Female threaded cap 3/4" in polypropylene

JIMT 051514

€1.42

3/4 inch female plug with threaded, made of polypropylene. It works as a compression accessory for high and low density polyethylene pipes. Its compact structure ensures tightness in fluid distribution systems, meeting the quality standards required by European certification organisations.

Available

Fittings and Seals

Female threaded cap 1/2" polypropylene

JIMT 051510

€1.08

1/2" threaded female stopper made of polypropylene. It works as a compression accessory for closing high and low density polyethylene pipes. Its installation is simple and meets European certification standards, ensuring a reliable connection in fluid systems.

Threaded sleeve 3/4" polypropylene for PE pipes

Available

Fittings and Seals

Threaded sleeve 3/4" polypropylene for PE pipes

JIMT 050304

€2.41

3/4" threaded sleeve made of polypropylene, designed as a compression accessory for the connection of high and low density polyethylene pipes. This component ensures a safe and hermetic bonding in fluid distribution systems, complying with European certification standards for technical installations.

Threaded sleeve 1/2" polypropylene for PE pipes

Available

Fittings and Seals

Threaded sleeve 1/2" polypropylene for PE pipes

JIMT 050310

€1.95

1/2" threaded sleeve made of polypropylene to connect high and low density polyethylene pipes. This compression accessory ensures a tight connection and meets the European certification standards of the sector.

Reduced threaded post 3/4-1/2" polypropylene

Available

Fittings and Seals

Reduced threaded post 3/4-1/2" polypropylene

JIMT 050743

€2.06

Reduced threaded male from 3/4 to 1/2 inches made of polypropylene. Designed to connect high and low density polyethylene pipes. It offers a compact and reliable installation, meeting European certification standards to ensure the integrity of the hydraulic system in industrial applications.

Reduced 1-3/4" threaded polypropylene boss

Available

Fittings and Seals

Reduced 1-3/4" threaded polypropylene boss

JIMT 050754

€2.89

Reduced sucker of 1-3/4" threaded made of polypropylene. Designed for compression connections in high and low density polyethylene pipes. It complies with European certification regulations, ensuring structural reliability and ease of installation in fluid distribution systems.

Threaded standpipe 3/4" polypropylene for PE pipes

Available

Fittings and Seals

Threaded standpipe 3/4" polypropylene for PE pipes

JIMT 050404

€2.06

3/4" threaded macho made of polypropylene, designed as a compression accessory for high and low density polyethylene pipes. It allows watertight connections in fluid distribution systems, complying with European industry certification regulations.

Threaded stand 1/2" polypropylene for PE pipes

Available

Fittings and Seals

Threaded stand 1/2" polypropylene for PE pipes

JIMT 050410

€1.82

1/2" threaded male made of polypropylene, designed as a compression accessory for high and low density polyethylene pipes. It allows watertight connections in fluid installations, complying with European certification regulations and facilitating installation in reduced spaces.

Threaded male adapter 1" polypropylene for PE pipes

Available

Fittings and Seals

Threaded male adapter 1" polypropylene for PE pipes

JIMT 050405

€2.89

1" threaded macho made of polypropylene, designed for connection of high and low density polyethylene pipes. This compression accessory allows you to make tight and secure connections, complying with European certification standards to guarantee the integrity of the channeling system in technical installations.

Available

Fittings and Seals

Male threaded cap M 3/4" polypropylene

JIMT 051504

€0.90

3/4 inch threaded male stopper made of polypropylene. It works as a compression accessory for high and low density polyethylene pipes, allowing effective closure of driving lines. Its installation is simple and complies with the regulations of the main European certification organisations in the sector.

Available

Fittings and Seals

Male threaded 2" polypropylene plug

JIMT 051503

€5.84

2-inch male stopper made of polypropylene. Designed for closing high and low density polyethylene pipes. It offers a simple installation and complies with existing European certification regulations to ensure the tightness of the distribution system.

Product added to wishlist