Ducts and dampers

Showing 73-93 of 93 item(s)

S&P Self-regulating flow regulator 120 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator 120 mm

SYP 5401632000

RDR-125/15 self-regulatory flow controller for 120 mm ducts. Maintains steady flow between 50 and 200 Pa. Manually adjustable on site, with pre-assembled foam gasket. Made of M1 plastic, suitable for air at 60 °C. Length of 86 mm, simple installation in ventilation and air treatment.

S&P Self-regulating flow regulator 96 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator 96 mm

SYP 5401631700

€31.13

RDR-100/60 self-regulating flow controller for 96 mm ducts. Maintains steady flow between 50 and 200 Pa with manual adjustment. Includes pre-assembled seal for sealing. Made of M1 plastic, suitable for air at 60 °C maximum.

S&P Self-regulating flow regulator RDR-100/45 96 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator RDR-100/45 96 mm

SYP 5401631500

€31.13

RDR-100/45 self-regulating flow controller for 96 mm ducts. Maintains steady flow between 50 and 200 Pa. Manual adjustment in installation. Plastic material M1, maximum temperature 60oC. Includes pre-assembled foam seal for watertightness. Length of 70 mm. Suitable for ventilation, extraction or drive in commercial and residential double flow facilities.

S&P Self-regulating flow regulator 96 mm RDR-100/30

Available

Ducts and dampers

S&P Self-regulating flow regulator 96 mm RDR-100/30

SYP 5401631400

€31.13

RDR-100/30 self-regulatory flow controller for 96 mm ducts, maintaining constant flow between 50 and 200 Pa. Manually adjustable, with pre-assembled seal of foam for sealing. Made of M1 plastic, suitable for air at 60oC maximum in ventilation systems and double flow.

S&P Self-regulating flow regulator RDR-100/15 96 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator RDR-100/15 96 mm

SYP 5401631300

€31.13

Self-regulating RDR-100/15 flow controller for 96 mm ducts. Maintains steady flow between 50 and 200 Pa. Manual adjustment, pre-assembled joint, length 70 mm. Plastic M1, max. 60oC. For ventilation and extraction in commercial or residential double flow facilities.

S&P Self-regulating flow regulator RD BP SM 15

Available

Ducts and dampers

S&P Self-regulating flow regulator RD BP SM 15

SYP 5401636700

€21.22

Self-regulating flow controller RD BP SM 15 for installation in mouth ducts or sleeves. Maintains a constant flow rate in a pressure range between 20 and 100 Pa.

S&P Conduit connection reducer ADRF 100/80

Available

Ducts and dampers

S&P Conduit connection reducer ADRF 100/80

SYP 5209221600

€10.01

Connection reduction for rigid ADRF ducts that allows to adapt the diameter from 100 mm to 80 mm. Designed to ensure continuity of air flow in ventilation facilities, ensuring a tight and stable connection between pipe sections of different calibres.

Available

Ducts and dampers

S&P Flow regulator RDRBP100/30 96 mm

SYP 5401229500

€31.22

RDRBP100/30 flow regulator designed for 96 mm ducts with manual operation. It operates in a very low pressure range from 20 to 100 Pa. It includes pre-assembled gasket and has a total length of 70 mm, optimizing the installation in ventilation systems.

S&P UNI 6P/125 Plenum with 6 Ø 80 mm outlets

Available

Ducts and dampers

S&P UNI 6P/125 Plenum with 6 Ø 80 mm outlets

SYP 5153674100

€179.44

Plenum UNI 6P/125 designed for dry areas, with drive insulation and suction 125/150-160 mm. It incorporates up to 8 80 mm openings, each equipped with clamping flanges to facilitate technical installation in ventilation systems.

S&P MNGPH 80 Accessory for BEH Drill Bit

Available

Ducts and dampers

S&P MNGPH 80 Accessory for BEH Drill Bit

SYP 5209173300

€10.20

The S & P MNGPH 80 accessory is a specific complement to the BEH drill. Its main function is to optimize tool performance, improving drilling efficiency and reducing the overall wear and tear of the drill.

S&P 125/80 mm Reducing Sleeve with Clamp for Ventilation

Available

Ducts and dampers

S&P 125/80 mm Reducing Sleeve with Clamp for Ventilation

SYP 5209160000

€10.20

Reducer sleeve from 125 to 80 mm for ventilation systems. Includes integrated clamp to ensure connection between ducts of different diameters. Made of resistant materials that guarantee structural stability and durability in technical installations. It allows accurate and efficient adaptation in air extraction or drive networks.

S&P CDR-ISO 125/90 Elbow Rigid Insulated Polyethylene

Available

Ducts and dampers

S&P CDR-ISO 125/90 Elbow Rigid Insulated Polyethylene

SYP 5209193100

€20.73

Codo CDR-ISO 125/90 insulated rigid polyethylene, designed for single-family and collective controlled mechanical ventilation installations. Compatible with double-flow and hygro-regulating systems, this component ensures continuity of the duct with an angle of 90 degrees and nominal diameter of 125 millimetres, facilitating integration into air...

S&P CDR-ISO 125/45 Elbow Rigid Insulated Polyethylene

Available

Ducts and dampers

S&P CDR-ISO 125/45 Elbow Rigid Insulated Polyethylene

SYP 5209193200

€15.45

Cod CDR-ISO 125/45 rigid polyethylene insulated. Intended for single-family and collective controlled mechanical ventilation facilities, including double-flow and hygro-regulating systems. Its design ensures the continuity of thermal insulation in duct leads, optimizing energy efficiency and minimizing load losses in the air circuit.

S&P Ventilation reducer adapter Ø80 to Ø75 mm plastic 96 mm

Available

Ducts and dampers

S&P Ventilation reducer adapter Ø80 to Ø75 mm plastic 96 mm

SYP 5800016400

€6.29

Diameter reducer adapter for ventilation systems, made of plastic. Connect 80 mm to 75 mm ducts by inserting ends. Its length of 96 mm allows a compact integration into the pipe network, facilitating assembly in standard technical installations.

S&P MFR-ISO 125 F5 class filter for filter boxes

Available

Ducts and dampers

S&P MFR-ISO 125 F5 class filter for filter boxes

SYP 5416817500

€25.34

MFR-ISO 125 coupling designed for mounting on MFL-F and MFR F5 filter boxes. It incorporates filters of class F5 (EU5) with maximum working temperature of 80oC and required load loss of 300 Pa. Specific technical component for industrial filtration systems.

S&P Round overpressure damper 125 mm grey

Available

Ducts and dampers

S&P Round overpressure damper 125 mm grey

SYP 5406076900

€24.55

PER-125 W pressure blind for 125 mm round ducts, made of thermoplastic stabilized against UV rays. It has front dimensions of 158 mm, grey color RAL 9010 and mounting with concealed screw, designed to resist abrasive flows in agricultural installations.

S&P Electronic voltage regulator REB-10 220-240V 10A

Available

Ducts and dampers

S&P Electronic voltage regulator REB-10 220-240V 10A

SYP 5401303200

€436.91

Reb-10 single-phase electronic voltage regulator for surface mounting, with 10 A rated current and IP54 protection degree. It incorporates rotary button control, luminous pilot and protection against radio interference. Includes replacement fuse and minimum adjustment for precise control of the 230 V secondary voltage.

S&P Electronic voltage regulator REB-2,5N 2.5 A IP44

Available

Ducts and dampers

S&P Electronic voltage regulator REB-2,5N 2.5 A IP44

SYP 5401272900

€188.83

Single phase electronic regulator REB-2,5N surface mount with IP44 protection grade. Operates at 230 V and 2.5 A, controlled by rotary button. It includes protection by fuses and against radio interference, with dimensions of 80x80x46 mm.

S&P Electronic voltage regulator REB-1N 1A 230V

Available

Ducts and dampers

S&P Electronic voltage regulator REB-1N 1A 230V

SYP 5401270300

€154.26

Reb-1N single phase electronic regulator for surface mounting, with nominal current of 1 A and secondary voltage of 230 V. It incorporates rotating control for regulation and stoppage, IP44 protection and dimensions of 80x80x46 mm. Includes auxiliary switch and protection against radio interference by fuses.

Asymmetric reducer circular ventilation duct Ø80-150 mm

Available

Ducts and dampers

Asymmetric reducer circular ventilation duct Ø80-150 mm

EDM 87402

€5.76

Asymmetric circular duct reducer for ventilation systems. It allows connecting pipes of different diameters, compatible with measures of Ø80, 100, 110, 120, 125 and 150 mm. Its design facilitates the adaptation in installations where the axes of the pipes do not coincide, optimizing the flow of air in forced or natural networks.

Circular duct reducer ventilation Ø80-150 mm

Available

Ducts and dampers

Circular duct reducer ventilation Ø80-150 mm

EDM 87401

€5.61

Circular duct reducer designed for ventilation systems, allows efficient connection between pipes of different diameters. Compatible with standard measures of 80, 100, 110, 120, 125 and 150 millimeters, facilitating the adaptation of the air infrastructure without the need for special tools or additional structural modifications in the assembly.

Product added to wishlist