Root

Showing 217-240 of 122919 item(s)

Available

Frequency Inverters / Variable Frequency Drives (VFD)

IMPO VW3A1102

Mounting kit for remote graphic terminal in speed changers of the Altivar range, compatible with models Altivar 32, 61, 71, 212, 61Q, 71Q and ATV320. Designed for installation in industrial environments, it offers IP54 protection. Includes screws, washers and mounting hardware. Weight: 0.15 kg. It complies with EU REACH and RoHS regulations (applicable...

Remote graphic terminal Altivar 08 240 x 160 pixels

Available

Frequency Inverters / Variable Frequency Drives (VFD)

Remote graphic terminal Altivar 08 240 x 160 pixels

IMPO VW3A1101

€333.80

240 x 160 pixel remote graphic terminal for Altivar range speed changers. It allows to control, adjust and configure the variator, display current values and manage configurations. Designed for enclosure door mounting, with IP54 protection. It supports 8 lines of text and operates in environments from -15 to 50 °C.

SUB-D 9 Line Terminator for Rack, Set of 2

Available

Industrial automation

SUB-D 9 Line Terminator for Rack, Set of 2

IMPO TSXTLYEX

€82.69

Line finisher for rack end, set of 2 units, compatible with the automation platform Modicon Premium model TSXRKY..EX. Each unit includes one SUB-D 9 connector with A label and one with B label, designed to ensure signal integrity in industrial control systems. Weight: 0.05 kg.

Available

Seccionadores

TransferPacT Module CAN Extension 24 V

IMPO TPCDIO15

€170.53

TransferPacT module for CAN bus extension and external 24 VDC power supply, designed for integration into signaling systems. Supports connection to external HMI, with 30 V DC electrical isolation, left-bottom mounting position, and screw-type terminal for wire sections from 0.05 to 2.6 mm².

Available

Industrial automation

Modbus RS485 Communication Module 0-248

IMPO TPCCOM16

€264.77

Modbus RTU slave communication module on RS485 interface for integration into automation systems. Supports transmission speeds of 4800, 9600 and 19200 bauds with even parity. Configuration address from 0 to 248. Connection via front-mounted screw terminals, square mounting. Shielded twisted pair cable 1.5 mm².

Plug-in miniature relay 3 A, 4 C/O, 230 V AC

Available

Interface and miniature relays

Plug-in miniature relay 3 A, 4 C/O, 230 V AC

IMPO RXM4GB2P7

€15.54

Harmony series miniature plug-in relay, with 4 C/O contacts, control voltage 230 V AC 50/60 Hz, rated current 3 A, mechanical durability of 10 million cycles and resistance to 2.5 kV voltage peaks. Includes status LED and lockable test button.

ABS Industrial Box Thalassa TBS IP66 IK07 89x89x54 mm

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS IP66 IK07 89x89x54 mm

IMPO NSYTBS885

€9.37

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. It has external dimensions of 89 mm (high) × 89 mm (width) × 54 mm (deepness), with interior dimensions of 80 mm × 80 mm × 47 mm.

Industrial box ABS Thalassa TBS IP66 IK07 RAL7035 341 x 291 x 128 mm

Available

Industrial electrical paneling

Industrial box ABS Thalassa TBS IP66 IK07 RAL7035 341 x 291 x 128 mm

IMPO NSYTBS342912

€89.02

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. External height 341 mm, width 291 mm, depth 128 mm. ABS material with RAL 7035 grey colour, resistant to temperatures from -25 °C to +60 °C.

ABS Industrial Box Thalassa TBS 291x241x168 mm

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS 291x241x168 mm

IMPO NSYTBS292416H

€91.77

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. External dimensions 291 x 241 x 168 mm, internal height 275 mm.

ABS Industrial Box Thalassa TBS 241x194x87 mm

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS 241x194x87 mm

IMPO NSYTBS24198

€42.06

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. External dimensions 241 x 194 x 87 mm, internal height 225 mm. Made of impact- and fire-resistant material (650 °C), with TÜV certification and proactive RoHS compliance.

ABS Industrial Box Thalassa TBS IP66 IK07 241x194x127 mm

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS IP66 IK07 241x194x127 mm

IMPO NSYTBS241912H

€50.11

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. It has external dimensions of 241 mm (high) x 194 mm (width) x 127 mm (deepness), with interior of 225 x 175 x 120 mm.

ABS Industrial Box Thalassa TBS Gray RAL7035

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS Gray RAL7035

IMPO NSYTBS241910H

€45.36

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. It has external dimensions of 241 mm (high) x 194 mm (width) x 107 mm (deepness), thermal resistance from -25 to 60 °C and TÜV certification.

ABS Industrial Box Thalassa TBS 241x194x107 mm

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS 241x194x107 mm

IMPO NSYTBS241910

€45.71

Industrial one-piece molded ABS box, with 241 x 194 x 107 mm dimensions, IP66 and IK07 protection grade, designed for wall mounting. Made of ABS material (RAL 7035), resists temperatures from -25 to 60 °C and offers class II electrical insulation.

ABS Industrial Box Thalassa TBS 192x121x105 mm

Available

Industrial electrical paneling

ABS Industrial Box Thalassa TBS 192x121x105 mm

IMPO NSYTBS191210H

€25.74

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. External dimensions: 192 mm (high) x 121 mm (width) x 105 mm (deepness). Resistant to temperatures from -25 °C to +60 °C, with TÜV certification and compliance with IEC 62208 and proactive RoHS.

Industrial box ABS Thalassa TBS IP66 IK07 RAL7035 138 x 93 x 72 mm

Available

Industrial electrical paneling

Industrial box ABS Thalassa TBS IP66 IK07 RAL7035 138 x 93 x 72 mm

IMPO NSYTBS1397

€13.83

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. It has external dimensions of 138 mm (high) x 93 mm (width) x 72 mm (deepness), with low blind cover and fastening by screws.

Industrial box ABS Thalassa TBS IP66 IK07 RAL7035 116 x 116 x 133 mm

Available

Industrial electrical paneling

Industrial box ABS Thalassa TBS IP66 IK07 RAL7035 116 x 116 x 133 mm

IMPO NSYTBS111113H

€20.17

One-piece molded ABS industrial box, with IP66 and IK07 protection grade, designed for demanding environments. It has external dimensions of 116 mm (high) × 116 mm (width) × 133 mm (deepness), with high blind cover and fastening by screws.

Thalassa TBP IP66 IK08 RAL7035 89 x 89 x 54 mm

Available

Industrial electrical paneling

Thalassa TBP IP66 IK08 RAL7035 89 x 89 x 54 mm

IMPO NSYTBP885

€11.29

One-piece moulded polycarbonate industrial box, with IP66 and IK08 protection grade, designed for wall installation in outdoor environments. It has external dimensions of 89 mm (high) × 89 mm (width) × 54 mm (deepness), with interior dimensions of 80 mm × 80 mm × 47 mm.

Thalassa TBP IP66 IK08 RAL7035 74 x 74 x 54 mm

Available

Industrial electrical paneling

Thalassa TBP IP66 IK08 RAL7035 74 x 74 x 54 mm

IMPO NSYTBP775

€10.64

Monoblock industrial case made of grey polycarbonate RAL 7035, with IP66 and IK08 protection, designed for wall mounting in exterior environments. It has external dimensions of 74 mm × 74 mm × 54 mm and internal dimensions of 65 mm × 65 mm × 47 mm. It meets IEC 62208 and UL 508A standards, certified TÜV UL, and supports operating temperatures between -25...

Thalassa polycarbonate industrial box IP66 IK08 341 x 291 x 128 mm

Available

Industrial electrical paneling

Thalassa polycarbonate industrial box IP66 IK08 341 x 291 x 128 mm

IMPO NSYTBP342912

€115.69

One-piece moulded polycarbonate industrial box, with IP66 and IK08 protection grade, designed for wall installation in outdoor environments. Made of grey polycarbonate (RAL 7035), resists operating temperatures between -25 °C and +80 °C, with fire resistance of 960 °C and TÜV UL and IEC 62208 certifications.

Thalassa polycarbonate industrial box IP66 IK08 241 x 194 x 87 mm

Last units

Industrial electrical paneling

Thalassa polycarbonate industrial box IP66 IK08 241 x 194 x 87 mm

IMPO NSYTBP24198

€54.43

One-piece moulded polycarbonate industrial case with IP66 and IK08 protection grade, designed for wall mounting in outdoor environments. Made of RAL 7035 grey polycarbonate, resists operating temperatures between -25 °C and +80 °C, with TÜV UL certification and compliance with UL 508 A and IEC 62208 standards.

Thalassa polycarbonate industrial box IP66 IK08 241 x 194 x 107 mm

Available

Industrial electrical paneling

Thalassa polycarbonate industrial box IP66 IK08 241 x 194 x 107 mm

IMPO NSYTBP241910

€36.65

Thalassa TBP type polycarbonate industrial box, designed for wall installation in outdoor environments. It offers IP66 protection and IK08 impact degree, resistant to temperatures from -25 °C to +80 °C. Made of RAL 7035 grey polycarbonate, with one-piece molded structure and low blind lid fixed with screws.

Thalassa TBP Polycarbonate Industrial Box IP66

Available

Industrial electrical paneling

Thalassa TBP Polycarbonate Industrial Box IP66

IMPO NSYTBP11116

€16.55

Monoblock industrial case made of grey polycarbonate RAL 7035, designed for wall mounting in exterior environments. It offers IP66 and IK08 protection, thermal resistance from -25 to 80 °C and ability to withstand fire up to 960 °C. Its external dimensions are 116 x 116 x 62 mm and interior 105 x 105 x 55 mm, with composition of 1 body, 1 lid and 4 screws.

Universal naughty 90 mm, 3 rows, adjustable 25 mm wardrobe 300 mm

Available

Industrial electrical paneling

Universal naughty 90 mm, 3 rows, adjustable 25 mm wardrobe 300 mm

IMPO NSYSUCR9030

€95.01

Universal tray for mounting in cupboards of the Spacial range, with 3 horizontal rows, adjustment of 25 mm, maximum load capacity of 130 kg, made of zinc coated steel, compatible with Space SF, SMHF, SF 5G and VDM models, designed for multi-use use in cabinet structures.

Sliding guides for 600 mm mounting plate

Available

Accessories for electric boxes

Sliding guides for 600 mm mounting plate

IMPO NSYSMPS6

€63.17

Mounting plate slide guides for system PanelSet SFN, depth 600 mm. Made of zinc-coated steel, designed for mounting on the bottom of the cabinet. Compatible with current sensors PanelSet SF, SFHD and Altivar ATV610. It includes two fastening lanes and are installed by clamping elements.

1
…
9
10
11
…
5122

Root