List of products by brand S&P

Showing 109-144 of 179 item(s)

S&P CDR-ISO 125/90 Elbow Rigid Insulated Polyethylene

Available

Ducts and dampers

S&P CDR-ISO 125/90 Elbow Rigid Insulated Polyethylene

SYP 5209193100

Codo CDR-ISO 125/90 insulated rigid polyethylene, designed for single-family and collective controlled mechanical ventilation installations. Compatible with double-flow and hygro-regulating systems, this component ensures continuity of the duct with an angle of 90 degrees and nominal diameter of 125 millimetres, facilitating integration into air...

S&P CDR-ISO 125/45 Elbow Rigid Insulated Polyethylene

Available

Ducts and dampers

S&P CDR-ISO 125/45 Elbow Rigid Insulated Polyethylene

SYP 5209193200

€15.45

Cod CDR-ISO 125/45 rigid polyethylene insulated. Intended for single-family and collective controlled mechanical ventilation facilities, including double-flow and hygro-regulating systems. Its design ensures the continuity of thermal insulation in duct leads, optimizing energy efficiency and minimizing load losses in the air circuit.

S&P Centrifugal fan CBM/6-380/380 2200W 230V 50Hz

S&P Centrifugal fan CBM/6-380/380 2200W 230V 50Hz 2

Available

Duct extractors

S&P Centrifugal fan CBM/6-380/380 2200W 230V 50Hz

SYP 5128499000

€1,775.70

Double-inlet centrifugal fan with built-in 2200 W, 6-pole motor. Made of galvanized steel with forward-curved impeller. Provides an airflow of 8000 m³/h at 400 Pa static pressure. Operates on 3x400 V, 50 Hz three-phase voltage.

S&P Centrifugal fan CBM-12/9 1100W 6PT 2

Available

Duct extractors

S&P Centrifugal fan CBM-12/9 1100W 6PT

SYP 5128993000

€1,164.85

Double suction CBM-12/9 centrifugal fan with 1100W engine and 6 poles. Made of galvanized steel with forward wing impeller, dynamically balanced. Operates at 230V-50Hz single phase or 230/400V three phase, including discharge flange.

S&P Centrifugal fan CBM-12/12 550W 6P VR

Available

Duct extractors

S&P Centrifugal fan CBM-12/12 550W 6P VR

SYP 5128992900

€1,038.42

Double suction CBM-12/12 centrifugal fan with 550W engine and 6 poles. Made of galvanized steel with forward-balanced forward wing impellers. Operates at 230V single phase or 230/400V three phase at 50Hz, including discharge flange and adjustable support for four positions.

S&P Centrifugal ventilation box CVB 4-270 1400 rpm galvanized steel

S&P Centrifugal ventilation box CVB 4-270 1400 rpm galvanized steel 2

Available

Duct extractors

S&P Centrifugal ventilation box CVB 4-270 1400 rpm galvanized steel

SYP 5137211000

€1,238.51

CVB/4-270/270-N-373W ventilation box with double suction centrifugal fan and ball bearings. Made of galvanized steel sheet with acoustic insulation of melamine foam. Single phase or three phase engine of 1400 rpm, compatible with the ErP Directive and suitable for external installation.

S&P Adjustable plastic extractor/fan outlet BORJ-80

Available

Duct extractors

S&P Adjustable plastic extractor/fan outlet BORJ-80

SYP 5416615100

€13.95

BORJ-80 adjustable plastic mouth for extraction and air drive. Includes mobile central shutter with adjustment screw to control flow. Operating in a pressure range of 40 to 150 Pa. Designed specifically for joint duct installation, ensuring safe and efficient installation in ventilation systems.

S&P Adjustable plastic extractor/fan outlet BOR-160

Available

Duct extractors

S&P Adjustable plastic extractor/fan outlet BOR-160

SYP 5416618600

€26.63

BOR-160 pump pump mouth made of adjustable white plastic. Designed for extraction and air drive in rooms. It operates between 40 and 150 Pa. Includes mobile central shutter with adjustment screw to control flow. Available in BORP versions for Pladur and Borj for ducts.

S&P Adjustable plastic booster extractor outlet BOR-100

Available

Duct extractors

S&P Adjustable plastic booster extractor outlet BOR-100

SYP 5416615200

€19.35

BOR-100 pump pump mouth made of adjustable white plastic. Designed to extract and drive air in commercial rooms and premises. It operates in a pressure range of 40 to 150 Pa. Incorporates mobile central shutter with adjustment screw to control the flow rate.

S&P Self-regulating extraction outlet 125 mm white

Available

Grilles, diffusers and vents

S&P Self-regulating extraction outlet 125 mm white

SYP 5209158400

€28.81

BARJ45 self-regulating extraction mouth made of white polystyrene, designed for automatic flow regulation in ventilation ducts. It has a nominal connection diameter of 125 mm and has a round shape.

Available

Grilles, diffusers and vents

S&P Self-regulating extraction outlet 125 mm white

SYP 5209158300

€28.81

BARJ30 self-regulating extraction mouth made of white polystyrene, designed for automatic flow regulation in ventilation ducts. It has a nominal connection diameter of 125 mm and has a round shape.

S&P Self-regulating extraction outlet BAR60 125 mm

Available

Grilles, diffusers and vents

S&P Self-regulating extraction outlet BAR60 125 mm

SYP 5209156700

€22.49

Self-regulatory extraction mouth BAR60 made of white polystyrene. Designed to regulate air flow in kitchens and bathrooms through its self-control system. Includes nominal connection diameter of 125 mm and round shape.

S&P Self-regulating extraction outlet BAR30 125 mm

Available

Grilles, diffusers and vents

S&P Self-regulating extraction outlet BAR30 125 mm

SYP 5209156500

€22.49

BAR30 self-regulating extraction mouth made of white polystyrene, designed for the automatic regulation of air flow in ventilation ducts. It has a round shape with a nominal connection diameter of 125 mm.

S&P Humidity-controlled exhaust grille BEH 5/45 125 mm

Available

Grilles, diffusers and vents

S&P Humidity-controlled exhaust grille BEH 5/45 125 mm

SYP 5209344500

€102.96

Hygroregulatory extraction mouth BEH 5/45 made of white polystyrene. Designed to modulate the extraction flow rate according to the interior humidity. It incorporates nominal 125 mm duct diameter and rubber ring for mounting. Includes drainage valve and volume control.

S&P Humidity-controlled exhaust grille BEH 5/25 white 125 mm

Available

Grilles, diffusers and vents

S&P Humidity-controlled exhaust grille BEH 5/25 white 125 mm

SYP 5209344700

€102.96

Hygroregulatory extraction mouth BEH 5/25 made of white polystyrene. Designed to modulate the extraction flow rate according to the internal relative humidity. It incorporates nominal 125 mm connection diameter and rubber ring for mounting. Includes drainage valve and volume control. Suitable for single-family, collective or commercial buildings.

S&P Humidity-controlled exhaust grille BEH 15/75 white

Available

Grilles, diffusers and vents

S&P Humidity-controlled exhaust grille BEH 15/75 white

SYP 5209344400

€138.75

Hygroregulatory extraction mouth BEH 15/75 made of white polystyrene. Designed to modulate the extraction flow rate according to the internal relative humidity. It incorporates volume control and rubber ring for installation. Compatible with pipes of 125 mm of nominal diameter. Suitable for single-family, collective or commercial buildings according to...

S&P Humidity-controlled extraction grille BEH 15/25 white 125 mm

Available

Grilles, diffusers and vents

S&P Humidity-controlled extraction grille BEH 15/25 white 125 mm

SYP 5209344600

€102.96

Hydraulic extraction mouth BEH 15/25 made of round-shaped white polystyrene. It allows the extraction flow rate to be modulated according to the internal humidity by volume control. Includes rubber ring for mounting and drainage valve.

S&P Plastic ventilation outlet BDOP-80 white 80 mm

Available

Grilles, diffusers and vents

S&P Plastic ventilation outlet BDOP-80 white 80 mm

SYP 5209185400

€24.97

Plastic mouth BDOP-80 square shape and white, with nominal diameter of 80 mm connection. Designed for extraction or drive systems in simple flow, double flow or air conditioning installations.

S&P BDOP 160 mm white supply and extraction outlet

Available

Grilles, diffusers and vents

S&P BDOP 160 mm white supply and extraction outlet

SYP 5209220500

€39.88

Extractive mouth and drive BDOP 160 made of white plastic with square shape. It incorporates feed and drain valves, designed for single or double flow installations. It allows mounting on plate with specific anchors and supports flow regulator in the duct to control air passage with technical precision.

S&P Plastic supply and exhaust outlet 125 mm BDOP-125

Available

Grilles, diffusers and vents

S&P Plastic supply and exhaust outlet 125 mm BDOP-125

SYP 5209185500

€36.68

White and square shaped BDOP-125 plastic mouth, designed for extraction or drive systems in simple-flow, double-flow or air-conditioning installations. Allows to adjust the direction and range of the airflow in drive mode.

S&P Extraction and Impulsion Outlet BDOP 100 mm White Plastic

Available

Grilles, diffusers and vents

S&P Extraction and Impulsion Outlet BDOP 100 mm White Plastic

SYP 5209225800

€36.68

BDOP 100 extraction or drive mouth in white plastic, square shape and nominal diameter of 100 mm. It includes feed and drain valves, designed for simple flow, double flow or air conditioning installations with pladur mounting.

S&P Square plastic inspection opening 160 mm

Available

Grilles, diffusers and vents

S&P Square plastic inspection opening 160 mm

SYP 5209210000

€30.66

BDO-160 square shaped white plastic mouth, designed for extraction or drive systems in simple flow, double flow or air conditioning installations. It incorporates a nominal diameter of 160 mm duct and rubber ring for mounting.

S&P Exhaust and supply outlet BDO 125 mm

Available

Grilles, diffusers and vents

S&P Exhaust and supply outlet BDO 125 mm

SYP 5209070300

€29.57

BDO 125 extraction and drive nozzle made of white plastic for single or double flow installations. Allows to adjust the direction and range of the air in drive. Compatible with mounting on the plater by connecting sleeve with anchors. Supports flow regulator in the sleeve or duct according to specific model.

S&P Extraction and supply outlet BDO 100 mm white

Available

Grilles, diffusers and vents

S&P Extraction and supply outlet BDO 100 mm white

SYP 5209225900

€29.57

Extraction and drive mouth BDO 100 made of white plastic with square shape. Designed for simple flow, double flow or air conditioning installations. It incorporates rubber ring for assembly and feed and drain valves. Compatible with channels of 100 mm of nominal diameter. Allows to adjust the flow direction in drive mode.

S&P Self-regulating extraction outlet BARP60 125 mm

Available

Grilles, diffusers and vents

S&P Self-regulating extraction outlet BARP60 125 mm

SYP 5209152700

€32.44

Self-regulating BARP60 extraction mouth made of white polystyrene. Designed to regulate air flow in kitchens and bathrooms by automatic volume control. Includes sleeve with specific anchor brackets for mounting on plate plates and connection to flexible ventilation ducts.

S&P Self-regulating extraction outlet BARP30 125 mm white

Available

Grilles, diffusers and vents

S&P Self-regulating extraction outlet BARP30 125 mm white

SYP 5209157900

€32.44

BARP30 self-regulating extraction mouth made of white polystyrene, designed for the automatic regulation of air flow in ventilation ducts. It has a round shape with a nominal connection diameter of 125 mm, allowing its installation in kitchens, bathrooms or other rooms that require volume control without the need for additional valves.

S&P Floor Air Circulator ARTIC-305 JET 30W 270mm Propeller

Available

Industrial fans

S&P Floor Air Circulator ARTIC-305 JET 30W 270mm Propeller

SYP 5301976500

€115.43

ARTIC-305 JET air circulator with 30W brushless DC engine and 270mm propeller. It offers 12 speeds, tiltable head from 0 to 90 degrees and air projection up to 6 meters. Includes 15 hour timer, magnetic remote control and thermal protection.

S&P Ventilation reducer adapter Ø80 to Ø75 mm plastic 96 mm

Available

Ducts and dampers

S&P Ventilation reducer adapter Ø80 to Ø75 mm plastic 96 mm

SYP 5800016400

€6.29

Diameter reducer adapter for ventilation systems, made of plastic. Connect 80 mm to 75 mm ducts by inserting ends. Its length of 96 mm allows a compact integration into the pipe network, facilitating assembly in standard technical installations.

S&P MFR-ISO 125 F5 class filter for filter boxes

Available

Ducts and dampers

S&P MFR-ISO 125 F5 class filter for filter boxes

SYP 5416817500

€25.34

MFR-ISO 125 coupling designed for mounting on MFL-F and MFR F5 filter boxes. It incorporates filters of class F5 (EU5) with maximum working temperature of 80oC and required load loss of 300 Pa. Specific technical component for industrial filtration systems.

S&P MCA-800 backdraft damper for in-line fans

Available

Duct extractors

S&P MCA-800 backdraft damper for in-line fans

SYP 5418043500

€100.74

MCA-800 anti-return door designed for the discharge of fans in line. Its main function is to prevent reverse air circulation when ventilation equipment is not in operation, ensuring flow control in extraction systems.

S&P Backdraft damper MCA-500/150 for in-line fans

Available

Duct extractors

S&P Backdraft damper MCA-500/150 for in-line fans

SYP 5418041900

€81.55

MCA-500/150 anti-return door designed for the discharge of fans in line. Its main function is to prevent the inverse circulation of the air when the ventilation equipment is not in operation, guaranteeing the tightness of the circuit and avoiding unwanted currents in technical installations.

S&P MCA-350 backdraft damper for inline fans

Available

Duct extractors

S&P MCA-350 backdraft damper for inline fans

SYP 5418040100

€69.37

MCA-350 anti-return door for fans in line. It prevents reverse air circulation when the equipment is off, ensuring flow control in extraction systems and avoiding unwanted currents in the duct.

S&P MCA-250 backdraft damper for inline fans

S&P MCA-250 backdraft damper for inline fans 2

Available

Duct extractors

S&P MCA-250 backdraft damper for inline fans

SYP 5418039300

€68.12

MCA-250 anti-return door designed for the discharge of fans in line. Its main function is to prevent the circulation of air when the equipment is not in operation, ensuring the tightness of the ventilation system.

S&P Adjustable plastic extractor/fan inlet/outlet BOR-125

Available

Duct extractors

S&P Adjustable plastic extractor/fan inlet/outlet BOR-125

SYP 5416616000

€20.45

BOR-125 adjustable plastic mouth for extraction and air drive in rooms. Includes mobile central shutter with adjustment screw to control flow. Operating in a pressure range of 40 to 150 Pa. Available in BORP versions for Pladur and Borj for ducts, facilitating installation in different technical environments.

S&P Metallic backdraft damper CAR-150 for extractors

Available

Duct extractors

S&P Metallic backdraft damper CAR-150 for extractors

SYP 5416444700

€39.43

CAR-150 metal counter-return door designed to prevent the entry of odours and air currents. Avoids heating leaks when the extractor is inactive. It is installed directly between the exhaust and the ventilation duct.

Available

Grilles, diffusers and vents

S&P Adjustable intake opening 225 mm

SYP 5416406600

€24.09

225 mm white round suction mouth, designed for adjustable air extraction in residential and commercial facilities. It incorporates a mobile central shutter that allows the extraction flow to be adjusted accurately. The system maintains a constant flow of air at operating pressures between 80 and 140 Pa, ensuring stable performance. Its installation is...