List of products by brand S&P

Showing 73-108 of 179 item(s)

S&P Axial bathroom extractor fan 188 mm 87 m³/h IP45

Available

Exhaust fans bathroom

S&P Axial bathroom extractor fan 188 mm 87 m³/h IP45

SYP 5210611000

SILENT-100CRZ DESIGN axial bathroom extractor fan with a flow rate of 87 m³/h and a nominal diameter of 188 mm. Operates at 230V-50Hz, includes an adjustable delay switch and IP45 protection. Wall or duct mounting, white plastic housing, and ball-bearing motor for low vibration.

S&P Duct silencer 160 mm galvanized steel

Available

Ducts and dampers

S&P Duct silencer 160 mm galvanized steel

SYP 5211810600

€315.59

SIL-160 galvanized steel silencer to reduce transmitted noise. Nominal diameter of 160 mm with 50 mm glass wool insulation. Damping from 26 dB to 1000 Hz and maximum average temperature of 60 °C.

S&P Flexible acoustic connection LAF 125 0.5M-25

Available

Ducts and dampers

S&P Flexible acoustic connection LAF 125 0.5M-25

SYP 5209062000

€87.04

Flexible LAF 125 acoustic connection of 0.5 meters in length, designed for ventilation systems. Incorporates integrated silencers to reduce noise transmission. Compatible with diameters of 25 mm, optimizing air flow in technical installations.

S&P CO2 and temperature ambient probe SCO2-A 0/10V

Available

Ducts and dampers

S&P CO2 and temperature ambient probe SCO2-A 0/10V

SYP 5401221000

€1,246.88

SCO2-A ambient probe with NDIR technology for CO2 measurement (0-2000 ppm) and temperature (0-50 °C). It offers two analog outputs of 0-10 V and is powered by 24 V AC or 15-35 V DC. Designed for wall mounting with IP20 protection grade, it optimizes ventilation in rooms through energy control.

S&P Corrosion-resistant ventilation grille 250x100 mm

Available

Grilles, diffusers and vents

S&P Corrosion-resistant ventilation grille 250x100 mm

SYP 5800010500

€76.64

S & P TERRA250100 grid with dimensions of 250 x 100 mm. Designed for ventilation and drainage applications under construction. Made of high strength materials that guarantee durability and corrosion protection. Its optimized structure favors efficient airflow by minimizing the loss of load during operational use.

Available

Grilles, diffusers and vents

S&P Ventilation grille 250 x 100 mm

SYP 5800010400

€32.03

Ventilation grid with dimensions of 250 x 100 mm, designed for air conditioning systems. Its robust structure ensures durability and efficient airflow in technical installations. The assembly is simple, allowing quick integration into standard conduits without compromising system performance.

S&P Self-regulating flow regulator 76 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator 76 mm

SYP 5401631100

€25.60

RDR-80/30 self-regulatory flow regulator for 76 mm ducts, designed to maintain a constant flow between 50 and 200 Pa. Its manual installation allows you to adjust the flow directly in the network.

S&P Self-regulating flow regulator RDR-80/45 76 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator RDR-80/45 76 mm

SYP 5401631200

€25.60

RDR-80/45 self-regulating flow controller for 76 mm ducts. Maintains constant flow between 50 and 200 Pa by manual adjustment. Made of M1 plastic with pre-assembled foam seal for sealing. Compatible with maximum air 60 °C in ventilation or extraction systems.

S&P Self-regulating flow regulator 120 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator 120 mm

SYP 5401632500

€35.09

RDR-125/90 self-regulatory flow regulator for 120 mm ducts, which maintains constant flow between 50 and 200 Pa. Manually adjustable on site, with pre-assembled foam seal for sealing. Made of M1 plastic, suitable for air at 60 °C in extraction or drive.

S&P Self-regulating flow regulator RDR-125/60 120 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator RDR-125/60 120 mm

SYP 5401632300

€35.09

Self-regulating flow regulator RDR-125/60 for 120 mm ducts, designed to maintain a constant flow between 50 and 200 Pa. It incorporates pre-assembled foam gasket to ensure watertightness and is made of plastic with M1 firing classification.

Available

Ducts and dampers

S&P Self-regulating flow regulator 120 mm

SYP 5401632100

€35.09

Self-regulating flow regulator RDR-125/30 for 120 mm ducts, designed to maintain a constant flow between 50 and 200 Pa. Made of M1-classified plastic, it includes pre-assembled foam gasket to ensure sealing.

Available

Ducts and dampers

S&P Self-regulating flow regulator 120 mm

SYP 5401632000

€35.09

RDR-125/15 self-regulatory flow controller for 120 mm ducts. Maintains steady flow between 50 and 200 Pa. Manually adjustable on site, with pre-assembled foam gasket. Made of M1 plastic, suitable for air at 60 °C. Length of 86 mm, simple installation in ventilation and air treatment.

S&P Self-regulating flow regulator 96 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator 96 mm

SYP 5401631700

€31.13

RDR-100/60 self-regulating flow controller for 96 mm ducts. Maintains steady flow between 50 and 200 Pa with manual adjustment. Includes pre-assembled seal for sealing. Made of M1 plastic, suitable for air at 60 °C maximum.

S&P Self-regulating flow regulator RDR-100/45 96 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator RDR-100/45 96 mm

SYP 5401631500

€31.13

RDR-100/45 self-regulating flow controller for 96 mm ducts. Maintains steady flow between 50 and 200 Pa. Manual adjustment in installation. Plastic material M1, maximum temperature 60oC. Includes pre-assembled foam seal for watertightness. Length of 70 mm. Suitable for ventilation, extraction or drive in commercial and residential double flow facilities.

S&P Self-regulating flow regulator 96 mm RDR-100/30

Available

Ducts and dampers

S&P Self-regulating flow regulator 96 mm RDR-100/30

SYP 5401631400

€31.13

RDR-100/30 self-regulatory flow controller for 96 mm ducts, maintaining constant flow between 50 and 200 Pa. Manually adjustable, with pre-assembled seal of foam for sealing. Made of M1 plastic, suitable for air at 60oC maximum in ventilation systems and double flow.

S&P Self-regulating flow regulator RDR-100/15 96 mm

Available

Ducts and dampers

S&P Self-regulating flow regulator RDR-100/15 96 mm

SYP 5401631300

€31.13

Self-regulating RDR-100/15 flow controller for 96 mm ducts. Maintains steady flow between 50 and 200 Pa. Manual adjustment, pre-assembled joint, length 70 mm. Plastic M1, max. 60oC. For ventilation and extraction in commercial or residential double flow facilities.

S&P Self-regulating flow regulator RD BP SM 15

Available

Ducts and dampers

S&P Self-regulating flow regulator RD BP SM 15

SYP 5401636700

€21.22

Self-regulating flow controller RD BP SM 15 for installation in mouth ducts or sleeves. Maintains a constant flow rate in a pressure range between 20 and 100 Pa.

S&P Conduit connection reducer ADRF 100/80

Available

Ducts and dampers

S&P Conduit connection reducer ADRF 100/80

SYP 5209221600

€10.01

Connection reduction for rigid ADRF ducts that allows to adapt the diameter from 100 mm to 80 mm. Designed to ensure continuity of air flow in ventilation facilities, ensuring a tight and stable connection between pipe sections of different calibres.

Available

Ducts and dampers

S&P Flow regulator RDRBP100/30 96 mm

SYP 5401229500

€31.22

RDRBP100/30 flow regulator designed for 96 mm ducts with manual operation. It operates in a very low pressure range from 20 to 100 Pa. It includes pre-assembled gasket and has a total length of 70 mm, optimizing the installation in ventilation systems.

S&P UNI 6P/125 Plenum with 6 Ø 80 mm outlets

Available

Ducts and dampers

S&P UNI 6P/125 Plenum with 6 Ø 80 mm outlets

SYP 5153674100

€179.44

Plenum UNI 6P/125 designed for dry areas, with drive insulation and suction 125/150-160 mm. It incorporates up to 8 80 mm openings, each equipped with clamping flanges to facilitate technical installation in ventilation systems.

S&P CBP 9/9 support foot for centrifugal fans

Available

Duct extractors

S&P CBP 9/9 support foot for centrifugal fans

SYP 5127233400

€20.73

CBP 9/9 support foot designed for installation of centrifugal fans. It works as a mechanical fixation accessory that guarantees the structural stability of the equipment. Its specific design ensures a secure and aligned connection with the mounting base, facilitating integration into industrial or commercial ventilation systems.

Available

Zoning

S&P Acoustic insulation module MNGP-100

SYP 5209172700

€10.20

S & P's MNGP-100 acoustic insulation module reduces noise transmission in construction spaces. Its compact and lightweight design facilitates professional installation, while its robust structure ensures a long service life.

S&P 125 mm duct with clamp for ventilation outlet

Available

Grilles, diffusers and vents

S&P 125 mm duct with clamp for ventilation outlet

SYP 5209160100

€10.20

125 mm diameter ventilation sleeve with integrated clamp for connection to outlet mouth. Designed for air duct systems, it ensures airtight sealing that prevents leaks. Its robust structure facilitates safe installation in professional air conditioning and air extraction applications.

S&P MNGPH 80 Accessory for BEH Drill Bit

Available

Ducts and dampers

S&P MNGPH 80 Accessory for BEH Drill Bit

SYP 5209173300

€10.20

The S & P MNGPH 80 accessory is a specific complement to the BEH drill. Its main function is to optimize tool performance, improving drilling efficiency and reducing the overall wear and tear of the drill.

S&P 125/80 mm Reducing Sleeve with Clamp for Ventilation

Available

Ducts and dampers

S&P 125/80 mm Reducing Sleeve with Clamp for Ventilation

SYP 5209160000

€10.20

Reducer sleeve from 125 to 80 mm for ventilation systems. Includes integrated clamp to ensure connection between ducts of different diameters. Made of resistant materials that guarantee structural stability and durability in technical installations. It allows accurate and efficient adaptation in air extraction or drive networks.

S&P RC HTB ceiling fan kit with remote control

Available

Duct extractors

S&P RC HTB ceiling fan kit with remote control

SYP 5401630500

€44.32

S & P RC HTB ceiling fan kit for indoor ventilation. Includes components for quick installation, high efficiency motor with low power consumption and remote control for speed adjustment. Compact design that facilitates mounting on different types of roof, ensuring quiet operation and durability in domestic or commercial use.

S&P Axial bathroom extractor EDM-80N 9W 80 m³/h IP44

Available

Exhaust fans bathroom

S&P Axial bathroom extractor EDM-80N 9W 80 m³/h IP44

SYP 5210035100

€78.98

9W axial extractor EDM-80N for bathrooms, with an airflow of 80 m³/h and a 230V-50Hz motor. Includes thermal protection and IP44 rating, designed for wall or duct mounting with a white plastic housing.

Available

Duct extractors

S&P Axial air extractor 257 m³/h IP45

SYP 5210418900

€258.84

SILENT-300CRZ bathroom axial extractor with a 29 W motor and 1700 rpm. Offers an airflow of 257 m³/h and IP45 protection. Includes an adjustable delay switch and a white plastic housing for wall or duct mounting.

S&P Axial air extractor 180 mm 177 m3/h IP45

Available

Duct extractors

S&P Axial air extractor 180 mm 177 m3/h IP45

SYP 5210425400

€238.72

SILENT-200CRZ axial extractor, 16W and 180 mm diameter, designed for wall or duct mounting. Offers an airflow of 177 m³/h with a 230V-50Hz motor and IP45 protection. Includes an adjustable delay switch and a white plastic housing for efficient ventilation in bathrooms.

S&P Axial bathroom extractor 12V 92 m³/h IP57

Available

Exhaust fans bathroom

S&P Axial bathroom extractor 12V 92 m³/h IP57

SYP 5210408000

€132.25

Axial bathroom extractor with a 12 V, 8 W motor, designed for wall or duct mounting. It provides an airflow of 92 m³/h and IP57 protection, ensuring safety in humid environments through low safety voltage.

S&P Axial bathroom extractor EDM-80L 230V 13W IP44

Available

Exhaust fans bathroom

S&P Axial bathroom extractor EDM-80L 230V 13W IP44

SYP 5211412100

€86.18

Axial extractor EDM-80L for bathrooms, designed for ventilation with an airflow of 75 m³/h. Operates with a 230V-50Hz motor and 13W, reaching 2500 rpm. Includes IP44 protection and Class II insulation, with a white plastic housing and wall or duct mounting.

S&P Axial air extractor EDM-200S 25W 170 m3/h IP44

Available

Exhaust fans bathroom

S&P Axial air extractor EDM-200S 25W 170 m3/h IP44

SYP 5211551600

€107.16

25W axial extractor EDM-200S for bathrooms, with an airflow of 170 m³/h and IP44 protection. Operates at 230V-50Hz, includes a thermal protector and pilot light. Wall or duct mounting, white plastic housing, designed for efficient ventilation in humid spaces up to 40ºC.

S&P Centrifugal ventilation box CVT-380 2200W 900rpm

S&P Centrifugal ventilation box CVT-380 2200W 900rpm 2

Available

Duct extractors

S&P Centrifugal ventilation box CVT-380 2200W 900rpm

SYP 5148558900

€2,947.33

Ventilation box CVT-380/380-N-T with engine of 2200W and 900 rpm. Made of galvanized steel sheet with acoustic insulation of melamine foam. Includes double suction centrifugal fan on vibrating supports. Single phase or three phase motor with ball bearings and thermal protector. It complies with the ErP Directive.

S&P Centrifugal ventilation box CVB-270/200 245W 900rpm

S&P Centrifugal ventilation box CVB-270/200 245W 900rpm 2

Available

Duct extractors

S&P Centrifugal ventilation box CVB-270/200 245W 900rpm

SYP 5137210300

€1,405.06

Ventilation box CVB-270/200-N-RE-245W with double suction centrifugal fan and ball bearings. Made of galvanized steel sheet with acoustic insulation of melamine foam. Single phase or three phase 245W engine, 900 rpm speed and compliance with the ErP Directive.

S&P Centrifugal roof fan CTB4-400/160 ECOWATT BASIC

S&P Centrifugal roof fan CTB4-400/160 ECOWATT BASIC 2

Available

Duct extractors

S&P Centrifugal roof fan CTB4-400/160 ECOWATT BASIC

SYP 5136903300

€1,018.30

Centrifugal roof fan CTB4-400/160 ECOWATT BASIC with horizontal discharge and IP44 EC brushless motor. Designed for 159 mm ducts, it achieves 318 m³/h at 50 Pa with a maximum consumption of 20 W. Includes thermal protection and speed control via 0-10V analog signal or integrated potentiometer in the terminal box.

Available

Duct extractors

S&P DC Fan Speed Controller REB-ECOWATT

SYP 5401304000

€52.88

REB-ECOWATT speed regulator for fans with DC motor. It works by rotating button and offers switching contact. Its surface cast mounting, white color and IP44 degree of protection ensure a safe and durable interior installation.