Power tools

Showing 1-36 of 11031 item(s)

500W Column Drill with Laser and 5 Speeds

Available

Drills and drivers

500W Column Drill with Laser and 5 Speeds

EDM 84075

500 W column drill with induction engine and five speeds between 550 and 2500 rpm. Includes B16 cone spindle, precision laser and tiltable table up to 45°. Drill steel and wood up to ø13 mm with maximum torque of 2.98 Nm.

Available

Welding Wire

MIG-28 welding wire coil 0.8 mm 15 kg

EDM 16885

€102.27

Solid wire coil Mig-28 of 0.8 mm and 15 kg, coppered for carbon steel. It offers stable feed and good adhesion on light oxidation, indicated for MIG/MAG welding in structures, boiler and industrial repair works.

Rechargeable Screwdriver Kit 3.7V with 35 Accessories

Available

Drills and drivers

Rechargeable Screwdriver Kit 3.7V with 35 Accessories

EDM 08822

€31.90

Rechargeable screwdriver kit 3.7 V Li-ion 800 mAh with maximum torque of 2 Nm in electric mode and 8 Nm in manual. Speed of 250 rpm, load USB-C in 60-90 minutes. Includes 35 accessories, shaft lock, double turning sense, 1/4 inch hexagonal clamp, point magnet and working LED light.

20V Hydrocleaner Kit with 2.0Ah Battery and Charger

Available

Pressure Washers

20V Hydrocleaner Kit with 2.0Ah Battery and Charger

EDM 08499

€109.40

20 V battery water pump with working pressure of 22 bar and maximum flow rate of 220 l/h. Includes six-in-one adjustable nozzle, 400 ml detergent tank and 6 meter hose with filter.

20V Percussion Drill without Battery or Charger

Available

Drills and drivers

20V Percussion Drill without Battery or Charger

EDM 08496

€61.32

20 V drill with no battery or charger. It offers 2 speeds of 0-450 and 0-1,750 rpm, impact frequency of 0-9,000 and 0-32,400 ipm, maximum torque of 50 Nm with 19+1+1 settings. Includes 13 mm keyless screw holder, LED light, belt hook and hand strap.

3.7V Rotary Multi-Tool Kit with 51 Accessories

Available

Drills and drivers

3.7V Rotary Multi-Tool Kit with 51 Accessories

EDM 08439

€28.54

3.7V cordless rotary multi-tool with 1500 mAh battery. Offers 6 adjustable speeds between 9,000 and 20,000 rpm, digital speed indicator, and work LED light. Includes 51 accessories for cutting, sanding, and polishing, carrying case, and USB-C charging. Dimensions 160 x ø30 mm.

Brushless rotary hammer 20 V kit with 4.0 Ah battery and...

Available

Demolition and Pneumatic Hammers

Brushless rotary hammer 20 V kit with 4.0 Ah battery and charger

EDM 08438

€175.37

20 V wireless rotary hammer with brushless motor and SDS Plus mandrel. It offers 2.7 J impact energy and 4,300 ipm. Includes 4.0 Ah Li-ion battery, 60 W charger, three drill bits, two chiselles and transport case for professional use on site.

Available

Accessories and Spare Parts

Tolsen 34kg Magnetic Angle for Welding

GIB 144912

€10.79

The 34kg Tolsen magnetic angle facilitates the quick and easy placement of welding parts. It offers 45°, 75° and 135° working angles with precision. Its construction in high quality pressed steel integrates a powerful magnet for firm clamping.

WADFOW replacement lower blade ref. 50986

Available

Blades and Belts

WADFOW replacement lower blade ref. 50986

GIB 051683

€12.48

The reference bottom blade 50986 is an original replacement for electroportiles of the brand WADFOW, identified with the code WJC1520-SP-16. Designed to maintain cutting efficiency in power tools, this part ensures the correct functioning of the cutting mechanism by replacing worn or broken components in professional and domestic equipment.

WADFOW Replacement Upper Blade Ref. 50986

Available

Blades and Belts

WADFOW Replacement Upper Blade Ref. 50986

GIB 051682

1 Reviews

€9.09

The reference top blade 50986 is an original replacement for electroportiles of the brand WADFOW. With WJC1520-SP-16 piece code, this component ensures the correct functioning of the cutting mechanism in domestic and professional sewing machines, ensuring optimum accuracy during daily use.

Replacement Blade for Electric Shaver Ref. 50986

Available

Blades and Belts

Replacement Blade for Electric Shaver Ref. 50986

GIB 051681

€24.21

This is a reference blade assembly 50986 manufactured by the WADFOW brand. The component corresponds to code WJC1520-SP-C.T.G and is classified within the replacement subfamily for electroportables.

21-Piece Brush and Accessory Set for Power Tools WADFOW

21-Piece Brush and Accessory Set for Power Tools WADFOW 2

Available

Brushes / Bonets / Rubber Plates

21-Piece Brush and Accessory Set for Power Tools WADFOW

GIB 051668

€20.75

This set of 21 accessories for WADFOW brand electroportiles includes soft, hard and medium bristles brushes in 2 inch and 4 inch sizes with 1/4 inch hexagonal stem.

WADFOW BIM Mixed 12-Piece Jigsaw Blade Set

Available

Saw Blades

WADFOW BIM Mixed 12-Piece Jigsaw Blade Set

GIB 051667

€26.16

This WADFOW set includes 12 blades for sabre saw with BIM material. It contains three 150 mm wooden sheets with nails, four 150 mm and 225 mm for metal, and two 200 mm sheets designed to cut wooden pallets.

Set of 10 Wadfow Mixed Wood and Metal Saber Saw Blades

Available

Saw Blades

Set of 10 Wadfow Mixed Wood and Metal Saber Saw Blades

GIB 051666

€19.30

This WADFOW set (code WJT1001) contains ten sabre saw blades in individual blister presentation. Includes three pieces of 150 mm with 6 TPI in HCS for wood, three of 150 mm with 14-18 TPI in BIM for metal, two of 225 mm with 14-18 TPI in BIM for metal and two of 200 mm with 6-12 TPI in BIM for pallets. The variety of materials and teeth counts allows the...

WADFOW 300mm Sable Saw Blades for Metal 14-10TPI BIM Milling Set of 2

Available

Saw Blades

WADFOW 300mm Sable Saw Blades for Metal 14-10TPI BIM Milling Set of 2

GIB 051665

€7.77

This WADFOW two-leaf metal saw set, model WJT1225VF, measures 300 mm and has 14 to 10 teeth per inch in BIM profile optimized for milling.

Wadfow 225mm 14DPP Metal Saw Blade Set for Reciprocating Saws, 2-Pack

Available

Saw Blades

Wadfow 225mm 14DPP Metal Saw Blade Set for Reciprocating Saws, 2-Pack

GIB 051664

€5.07

The WADFOW, WJT1122BF, two-leaf saw blade set for metal has a diameter of 225mm and a density of 14 teeth per inch. Designed specifically for metal milling operations, these sheets offer optimal performance in precise cuttings.

WADFOW 225mm 18 TPI Metal Saw Blade Set for Reciprocating Saws (2-Pack)

Available

Saw Blades

WADFOW 225mm 18 TPI Metal Saw Blade Set for Reciprocating Saws (2-Pack)

GIB 051663

€4.71

This set of two saw blades for metal of the brand WADFOW measures 225 mm and has a density of 18 TPI. Designed for precise cuts in metal materials, this accessory for electroportables is delivered in blister presentation as a specialized technical spare part.

WADFOW Wood Sable Saw Blades 200mm 6-12 TPI Pack of 2

Available

Saw Blades

WADFOW Wood Sable Saw Blades 200mm 6-12 TPI Pack of 2

GIB 051662

€5.14

This WADFOW two blade saw set for wood measures 200 mm and has a tooth density of 6 to 12 TPI. Designed specifically for efficient cutting of wooden pallets, this accessory is presented in blister as part of the BIM M2+6150 electroportable tool family.

Set of 2 Wood Saw Blade Sander Blades with Nails 225mm 6TPI HCS WADFOW

Available

Saw Blades

Set of 2 Wood Saw Blade Sander Blades with Nails 225mm 6TPI HCS WADFOW

GIB 051661

€5.61

This WADFOW two-leaf sawboard set, with a WJT1111DF code, has a diameter of 225 mm and a density of 6TPI. Designed specifically for basic wood work with nails, these sheets feature HCS technology and optimized milling.

WADFOW Sable Saw Blades 240mm 5DPP-HCS Wood Cutting 2 Pieces

Available

Saw Blades

WADFOW Sable Saw Blades 240mm 5DPP-HCS Wood Cutting 2 Pieces

GIB 051660

€5.23

This set of two WADFOW wood saw blades, model WJT1531L, has a diameter of 240 mm and a density of 5 teeth per inch (5TPI). Made of HCS material, they have sharp and side teeth optimized for quick cutting in wood.

Set 2 wood saw blades WADFOW 225mm 6 TPI HCS

Available

Saw Blades

Set 2 wood saw blades WADFOW 225mm 6 TPI HCS

GIB 051659

€2.88

This set of two saw blades for WADFOW wood has a cutting diameter of 225 mm and a density of 6 TPI. Made of HCS steel with milling treatment, these sheets are specifically designed for wooden bases and are marketed in individual blister presentation under the code WJT1111D.

Set of 5 WADFOW T111C T144D T244D HCS T118A T118B HSS Saw Blades

Available

Saw Blades

Set of 5 WADFOW T111C T144D T244D HCS T118A T118B HSS Saw Blades

GIB 051658

€3.79

This set of five WADFOW saw blades, code WJB2K51, includes models T111C HCS, T144D HCS and T244D HCS for wood cutting, along with the T118A HSS and T118B HSS blades designed for metals.

Wadfow Hex Shank Wall Drill Bit 4x85 mm 2

Available

Drills

Wadfow Hex Shank Wall Drill Bit 4x85 mm

GIB 051652

€3.09

The WADFOW 4x85 mm hexagonal stem wall drill, code WMJ4K48, is designed to drill concrete, brick and blocks with smooth dust removal. Its construction allows an ultra-efficient drilling thanks to the hexagonal stem that facilitates coupling in electroportables.

Wadfow Flat Chisel 19x16mm 305mm 40Cr Steel Powder Coating

Wadfow Flat Chisel 19x16mm 305mm 40Cr Steel Powder Coating 2

Available

Drills

Wadfow Flat Chisel 19x16mm 305mm 40Cr Steel Powder Coating

GIB 051633

€5.46

The 305 mm WADFOW flat chisel has dimensions of 19 x 16 mm and is made of 40Cr steel. It has heat treatment and lucid powder coating for longer durability.

WADFOW P20S 20V 4A Charger for Power Tools

WADFOW P20S 20V 4A Charger for Power Tools 2

Available

Batteries and Chargers

WADFOW P20S 20V 4A Charger for Power Tools

GIB 051618

€42.42

The 4.0Ah WADFOW P20S charger is an accessory for electroportables that supplies 20V output with a maximum current of 4A. Operates with 220-240V~50/60Hz input voltage and is presented in individual box under the WFCP540E code, designed to recharge power tool batteries with technical efficiency.

Available

Miscellaneous

WADFOW 520mm Hexagon Chisel WGZ3204

GIB 051612

€19.53

The WADFOW WGZ3204 hexagonal SDS pointer measures 28 x 520 mm and has sharp point for concrete, brick and cement work. Made of high hardness steel, it offers wear resistance and long service life during continuous professional use.

Wadfow Flat Hexagonal Chisel 30x35x400 mm in Case

Wadfow Flat Hexagonal Chisel 30x35x400 mm in Case 2

Available

Drills

Wadfow Flat Hexagonal Chisel 30x35x400 mm in Case

GIB 051611

€6.78

This is a hexagonal chisel of the brand WADFOW, identified with the code WBC03540. The tool has dimensions of 30 x 35 x 400 millimeters and has a flat face at its working end. It is sold individually or in a case, designed for specific applications within the electro-portable accessories sector.

Wadfow Hexagonal SDS Chisel 28x35x520mm 2

Available

Miscellaneous

Wadfow Hexagonal SDS Chisel 28x35x520mm

GIB 051610

€19.74

The WADFOW hexagonal SDS cynzel, model WGZ3205, is a flat steel tool of high hardness and long service life. With dimensions of 28 x 35 x 520 mm, this accessory for electroportiles resists intense wear when working in concrete, brick and cement.

Cinzel flat SDS Max 18x50x400mm Wadfow 2

Available

Drills

Cinzel flat SDS Max 18x50x400mm Wadfow

GIB 051607

€13.48

WADFOW flat shearing blade with SDS MAX system, dimensions 18x50x400 mm and code WGZ2205. Designed for use in concrete, brick and cement, it is compatible with the brand's WRH3D38 and UWRH3D38 drills.

Last units

Miscellaneous

Set of 2 carbon brushes for ref. 50635 WADFOW brand

GIB 051586

€4.16

This set of two carbon brushes is an original replacement for WADFOW electroportables, designed specifically for reference 50635. The set includes two units ready for installation and maintenance of the electric motor, ensuring proper operation by replacing worn-out components for continuous use in industrial or domestic applications with WMD15851E-SP-16...

Available

Miscellaneous

Replacement rotor for portable electric motor Ref. 50635 brand Wadfow

GIB 051585

€27.33

The WADFOW rotor, reference WMD15851E-SP-15, is a technical spare part for electroportiles of the 50635 series. This component of the spare parts subfamily ensures the mechanical operation of the original equipment. Its specific design ensures direct compatibility with the models indicated in the manufacturer's technical documentation.

Available

Miscellaneous

Plastic Air Cover Replacement for Ref. 50622 Brand Wadfow

GIB 051583

€0.31

The Plastic Air Cover for reference 50622 is an original replacement of the WADFOW brand, belonging to the subfamily of electroportables. This component, identified with the WSU3066-SP-19 code, is sold in one-piece minimum units and forms part of the portable electrical equipment maintenance system.

3-Piece Drill Brush Set WADFOW 2/3.5/4 inch Hex Shank

3-Piece Drill Brush Set WADFOW 2/3.5/4 inch Hex Shank 2

Available

Brushes / Bonets / Rubber Plates

3-Piece Drill Brush Set WADFOW 2/3.5/4 inch Hex Shank

GIB 051540

€6.16

The WADFOW three-brush set, code WND14031, includes a 2-inch, 4-inch model and a 3.5-inch 360-degree rotational brush set. All have 1/4 inch hexagonal stem designed for cleaning floors, porcelain, granite, tiles and carpets by electroportiles.

WADFOW 150mm Velcro Sanding Disc Set P40 Grain 10pcs

Available

Sanding Discs

WADFOW 150mm Velcro Sanding Disc Set P40 Grain 10pcs

GIB 051535

€2.69

The 150mm WADFOW velcro sanding disc features a P40 grain made of aluminium oxide for grinding applications. This set includes ten units ideal for metal and wood work, offering a practical and durable solution for surface maintenance using power tools.

WADFOW WCJ3501 22x6x2mm Tile Cutting Blade

WADFOW WCJ3501 22x6x2mm Tile Cutting Blade 2

Available

Blades and Belts

WADFOW WCJ3501 22x6x2mm Tile Cutting Blade

GIB 051527

€12.11

The WADFOW tile cutter blade, model WCJ3501, is an essential replacement compatible with references 51417 and 51286. Made of high-strength steel, it has precise dimensions of 22x6x2 millimetres to ensure efficient and durable cutting in professional masonry and construction applications.

WADFOW WCJ1501 replacement blade for tile cutter 15x6x1.5mm

WADFOW WCJ1501 replacement blade for tile cutter 15x6x1.5mm 2

Available

Blades and Belts

WADFOW WCJ1501 replacement blade for tile cutter 15x6x1.5mm

GIB 051526

€3.46

This replacement blade for tile cutter model WCJ1501 is compatible with references 51417 and 51286. Made by the WADFOW brand, it has precise dimensions of 15x6x1.5mm. Designed as an essential component for electroportiles, it ensures the correct operation of the equipment during the ceramic cutting.

Find in this section all kinds of power tools for your electrical work and diy. The best way to save time and money, is to bet on the best tools for the job.

FAQ

Frequently asked questions

Herramientas eléctricas

What products in Herramientas eléctricas?

Items in Herramientas eléctricas. Filter by brand and features.

How to choose?

Check size, material and intended use on the sheet.

Different ranges?

Yes — domestic/pro depending on the ref.

Where to see details?

On each product page.

Catalogue examples?

Generador inverter 4,5 kW modelo Dallas · Generador inverter Houston 79 CC 2,4 kW · Generador inverter Houston 79 CC 2

Product added to wishlist