Drills

Showing 469-504 of 4881 item(s)

Available

Drills

Alpen Cobalt Forte drill bit 6.00 mm. (Blister 1 Piece)

AFT 09080950

Alpen Cobalt Forte drill bit 6.00 mm. (Blister 1 Piece)Diameter: 6.0 mm.Self-centering, thanks to its specially sharpened point.Ultra-resistant, due to an edge with special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Drills

Alpen Cobalt Forte drill bit 5.50 mm. (Blister 1 Piece)

AFT 09080945

€11.22

Alpen Cobalt Forte drill bit 5.50 mm. (Blister 1 Piece)Diameter: 5.5 mm.Self-centering, thanks to its specially sharpened point.Ultra-resistant, due to an edge with special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Available

Drills

Alpen Cobalt Forte drill bit 5.00 mm. (Blister 1 Piece)

AFT 09080940

€8.93

Alpen Cobalt Forte drill bit 5.00 mm. (Blister 1 Piece)Diameter: 5.0 mm.Self-centering, thanks to its specially sharpened point.Ultra-resistant, due to an edge with a special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Available

Drills

Alpen Cobalt Forte drill bit 4.50 mm. (Blister 1 Piece)

AFT 09080935

€9.30

Alpen Cobalt Forte drill bit 4.50 mm. (Blister 1 Piece)Diameter: 4.5 mm.Self-centering, thanks to its specially sharpened tip.Ultra-resistant, due to an edge with a special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Drills

Alpen Cobalt Forte drill bit 3.50 mm. (Blister 1 Piece)

AFT 09080925

€7.15

Alpen Cobalt Forte drill bit 3.50 mm. (Blister 1 Piece)Diameter: 3.5 mm.Self-centering, thanks to its specially sharpened tip.Ultra-resistant, due to an edge with a special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Available

Drills

Alpen Cobalt Forte drill bit 3.00 mm. (Blister 1 Piece)

AFT 09080920

€6.47

Alpen Cobalt Forte drill bit 3.00 mm. (Blister 1 Piece)Diameter: 3.5 mm.Self-centering, thanks to its specially sharpened tip.Ultra-resistant, due to an edge with a special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Available

Drills

Alpen Cobalt Forte drill bit 2.50 mm. (Blister 1 Piece)

AFT 09080915

€6.47

Alpen Cobalt Forte drill bit 2.50 mm. (Blister 1 Piece)Diameter: 2.5 mm.Self-centering, thanks to its specially sharpened tip.Ultra-resistant, due to an edge with a special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Available

Drills

Alpen Cobalt Forte drill bit 2.00 mm. (Blister 1 Piece)

AFT 09080910

€6.20

Alpen Cobalt Forte drill bit 2.00 mm. (Blister 1 Piece)Diameter: 2.0 mm.Self-centering, thanks to its specially sharpened point.Ultra-resistant, due to an edge with a special heat treatment nitro-oxide.Great chip evacuation capacity due to its deeper spiral.Faster due to the special sharpening of the slot and its tip.

Available

Drills

Alpen Cobalt Forte drill bit 1.50 mm. (Blister 1 Piece)

AFT 09080905

€6.67

Alpen Cobalt Forte drill bit 1.50 mm. (Blister 1 Piece)Diameter: 1.5 mm.Self-centering, thanks to its specially sharpened point.Ultra-resistant, due to an edge with special heat treatment nitro-oxide.Great chip evacuation capacity due to its spiral.Faster due to the special sharpening of the slot and its tip.

Drills

Alpen Cobalt drill bit 12.00 mm.

AFT 09080810

€41.37

Alpen Cobalt drill bit 12.00 mm.Diameter: 12.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Cobalt drill bit 11.00 mm.

AFT 09080800

€28.73

Alpen Cobalt drill bit 11.00 mm.Diameter: 11.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Cobalt drill bit 10.50 mm.

AFT 09080795

€15.73

Alpen Cobalt drill bit 10.50 mm.Diameter: 10.50 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 10.00 mm.

AFT 09080790

€17.98

Alpen Cobalt drill bit 10.00 mm.Diameter: 10.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 9.50 mm.

AFT 09080785

€18.53

Alpen Cobalt drill bit 9.50 mm.Diameter: 9.5 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 9.00 mm.

AFT 09080780

€16.50

Alpen Cobalt drill bit 9.00 mm.Diameter: 9 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Cobalt drill bit 8.50 mm.

AFT 09080775

€12.67

Alpen Cobalt drill bit 8.50 mm.Diameter: 8.5 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Cobalt drill bit 7.50 mm.

AFT 09080765

€10.67

Alpen Cobalt drill bit 7.50 mm.Diameter: 7.5 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 7.00 mm.

AFT 09080760

€10.09

Alpen Cobalt drill bit 7.00 mm.Diameter: 7.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Cobalt drill bit 6.50 mm.

AFT 09080755

€9.61

Alpen Cobalt drill bit 6.50 mm.Diameter: 6.5 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 6.00 mm.

AFT 09080750

€8.51

Alpen Cobalt drill bit 6.00 mm.Diameter: 6.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 5.00 mm.

AFT 09080740

€6.36

Alpen Cobalt drill bit 5.00 mm.Diameter: 5.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 4.50 mm.

AFT 09080735

€6.75

Alpen Cobalt drill bit 4.50 mm.Diameter: 4.5 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 4.00 mm.

AFT 09080730

€5.77

Alpen Cobalt drill bit 4.00 mm.Diameter: 4.0 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Cobalt drill bit 1.50 mm.

AFT 09080705

€4.78

Alpen Cobalt drill bit 1.50 mm.Diameter: 1.5 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Available

Drills

Alpen Cobalt drill bit 1.00 mm.

AFT 09080700

€5.30

Alpen Cobalt drill bit 1.00 mm.Diameter: 1 mm.Self-centering due to its specially sharpened tip.Tolerance up to 600º c. Thermal stress.Due to its special sharpening, it allows easier drilling with a pressure of up to 50% lower than normal.Suitable for construction steels, alloy steels, stainless steel, copper, brass, aluminum and plastic.

Drills

Alpen Hss Super Long Drill Bit 10.00x180/120 mm.

AFT 09080690

€13.59

Alpen Hss Super Long Drill 10.00x180/120 mm.Diameter x length/spiral: 10.00 x 180/120 mm.Precision grinding, minimum tolerances, maximum precision of concentrity.Precise milling due to its optimized tip sharpening.Made of top quality steel.Resistant to breakage, due to controlled heat treatment .

Drills

Alpen Hss Super Long Drill Bit 6.00x140/90 mm.

AFT 09080660

€7.41

Alpen Hss Super Long Drill 6.00x140/90 mm.Diameter x length/spiral: 6.00 x 140/90 mm.Precision grinding, minimum tolerances, maximum precision of concentrity.Precise milling due to its optimized tip sharpening.Made of top quality steel.Resistant to breakage, due to controlled heat treatment .

Drills

Alpen Hss Super Long Drill Bit 5.50x140/90 mm.

AFT 09080645

€6.75

Alpen Hss Super Long Drill 5.50x140/90 mm.Diameter x length/spiral: 5.50 x 140/90 mm.Precision grinding, minimum tolerances, maximum concentricity precision. Precise milling due to its optimized tip sharpening.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Available

Drills

Alpen Hss Super Long Drill Bit 5.00x130/85 mm.

AFT 09080640

€5.84

Alpen Hss Super Long Drill 5.00x130/85 mm.Diameter x length/spiral: 5.00 x 130/85 mm.Precision grinding, minimum tolerances, maximum precision of concentrity.Precise milling due to its optimized tip sharpening.Made of top quality steel.Resistant to breakage, due to controlled heat treatment .

Available

Drills

Alpen Hss Super Long Drill Bit 4.50x120/80 mm.

AFT 09080635

€5.57

Alpen Hss Super Long Drill 4.50x120/80 mm.Diameter x length/spiral: 4.50 x 120/80 mm.Precision grinding, minimum tolerances, maximum precision of concentrity.Precise milling due to its optimized tip sharpening.Made of top quality steel.Resistant to breakage, due to controlled heat treatment .

Available

Drills

Alpen HSS Super drill bit 13.00 mm. (Blister 1 Piece)

AFT 09080520

€22.99

Alpen HSS Super drill bit 13.00 mm. (Blister 1 Piece)Diameter: 13.0 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Drills

Alpen HSS Super drill bit 12.00 mm. (Blister 1 Piece)

AFT 09080510

€18.79

Alpen HSS Super drill bit 12.00 mm. (Blister 1 Piece)Diameter: 12.0 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Available

Drills

Alpen HSS Super drill bit 11.00 mm. (Blister 1 Piece)

AFT 09080500

€15.68

Alpen HSS Super drill bit 11.00 mm. (Blister 1 Piece)Diameter: 11.0 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Available

Drills

Alpen HSS Super drill bit 10.00 mm. (Blister 1 Piece)

AFT 09080490

€10.93

Alpen HSS Super drill bit 10.00 mm. (Blister 1 Piece)Diameter: 10.0 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Available

Drills

Alpen HSS Super 8.00 mm drill bit. (Blister 1 Piece)

AFT 09080470

€7.61

Alpen HSS Super 8.00 mm drill bit. (Blister 1 Piece)Diameter: 8.0 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Drills

Alpen HSS Super 7.50 mm drill bit. (Blister 1 Piece)

AFT 09080465

€7.37

Alpen HSS Super 7.50 mm drill bit. (Blister 1 Piece)Diameter: 6.5 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Product added to wishlist