Industrial equipment

Showing 97-120 of 791 item(s)

Available

Industrial equipment

IMPO ZBVM1

Ø 22 integral LED light block 230/240 V. Product range: Harmony XB4, Harmony XB5. Device short name: ZBV. Screw fixing terminals: 2 x 1.5 mm² with extr. Cable according to EN 60947-1, screw clamp terminals: 1 x 0.22 mm² without cable end according to EN 60947-1. Fixed signage. Protected LEDs. Comprehensive LEDs. Direct insulating separator. Light source...

Available

Industrial equipment

Luminous block diameter 22 24V white

IMPO ZBVB1

€8.82

Light block Ø 22 integral LED 24 V. Product range: Harmony XB4, Harmony XB5. Device short name: ZBV. Screw fixing terminals: 2 x 1.5 mm² with extr. Cable according to EN 60947-1, screw clamp terminals: 1 x 0.22 mm² without cable end according to EN 60947-1. Fixed signage. Protected LEDs. Comprehensive LEDs. Direct insulating separator. Light source color,...

Available

Industrial equipment

ZB5A plastic fixing collar for electrical block

IMPO ZB5AZ009

€5.26

Electrical block fixing ring for 22mm diameter units XB5-A. This product is sold in the form of a set of 10 units. It is part of the Harmony XB5 product range. It is presented made from plastic and is designed for application in electrical blocks.

Available

Industrial equipment

Simple push button IPB 1 NO gray

IMPO A9E18032

€18.08

Simple iPB pushbuttons Acti9 1NO, 20A, 250V AC, 1 gray pushbutton, Mounting method: Fixed, Mounting support: 35mm symmetrical DIN rail, Bare cable: 9mm, 82x18x71mm, White. Standards: IEC 60669-1, IEC 60947-5-1.

Available

Industrial equipment

Centralized control IATLC 24-240V AC

IMPO A9C15404

€40.29

Auxiliary with centralized control iATLc 24...240V AC 50/60 Hz impulse. With 2-input remote control for switch. Fixed mounting, on the right side of the TL. DIN rail mounting bracket. Measurements: 81x9x60mm. White color.

Available

Industrial equipment

Set of interlocking devices iC60 iID for 8mm diameter padlock (Bag 10u)

IMPO A9A26970

€22.63

Interlocking device for padlock Ø 8mm, bag of 10 units, IK60. Lock accessory. Benefits: Discover the new iC60Acti9 DIN rail circuit breaker up to 40A. The new reference in the field of terminal distribution. Easy to select and install with robust connections and ergonomic and safe terminals (twice the standard tightening torque). Environmentally friendly,...

Available

Industrial equipment

Box starter 1S 9A 230V 50/60Hz

IMPO LE1D09P7

€91.48

Boxed starter 9 A coil 230 V AC TeSys LE. Short name of the LE1D device. Standard device application. Employment category AC-3. Composition of equipment Contactor Thermal overload relay to be ordered separately. [Ie] rated operating current 9 A AC-3. Motor power in kW 4 kW at 380/400 V AC 50/60 Hz 4 kW at 415 V AC 50/60 Hz 4 kW at 440 V AC 50/60 Hz 2.2 kW...

Available

Industrial equipment

IMX trip coil 100-415V AC

IMPO A9A26476

€72.55

iMX Acti 9 emission coil, 110..415V AC, 50/60Hz with action indicator, adjustable clip and white. Product compatibility with iC60, iDPN Vigi, Terminal, Dual Terminal, iSW-NA, ARA, RCA and iID. Benefits: Discover the new iC60Acti9 DIN rail circuit breaker up to 40A. The new reference in the field of terminal distribution. Easy to select and install with...

Available

Industrial equipment

ISSW CM switch with 2 positions 1 contact 20A 250V

IMPO A9E18070

€11.82

Acti 9 electrical circuit control, 1 NO + NC, 2-position changeover switch, 20A, 250V 50/60 Hz, 2-position handle control, adjustable clip mounting, DIN rail support, bare 9mm lower cable, 82x18x75mm and White color. Standards: IEC 60669-1, IEC 60947-5-1.

Available

Industrial equipment

Temperature contact block T-1-30S

IMPO LADS2

€93.13

Timed contact block 1 NO + 1 NC screw connection TeSys D. Connections, terminals Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, without cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: solid, with cable end. Screw clamp...

Available

Industrial equipment

Auxiliary contact fault/device status NO/NO

IMPO LUA1C20

€15.86

LUA 2 NO signaling contact TeSys range. Device short name: LUA1. Composition of auxiliary contacts: 2 NA. Error signaling, rotary indicator handle in ready position. [Ue] rated operating voltage: 250 V AC = 250 V DC. [Ui] rated insulation voltage: 250 V according to CSA, 250 V according to IEC 60947-5-1, 250 V according to UL. [Ith] Conventional thermal...

BLOQUE CTOS AUXILIARES TESYS 1NA+1NC FRONTAL

BLOQUE CTOS AUXILIARES TESYS 1NA+1NC FRONTAL 2

Available

Industrial equipment

Auxiliary contact block 1 NO/1 NC front

IMPO LADN11

€10.04

Auxiliary contact block 1 NO + 1 NC screw connection TeSys D. Product compatibility CR1F. Auxiliary contact operation: Instantaneous. Connections, terminals Screw clamp terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, with cable end. Screw fixing terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, without cable end. Screw fixing terminals 1...

Available

Industrial equipment

Box starter 1S 9A 400V 50/60Hz

IMPO LE1D09V7

€91.48

TeSys LE 9 A 400 V AC coil starter in box. Short name of the LE1D device. Standard device application. Employment category AC-3. Composition of equipment Contactor Thermal overload relay to be ordered separately. [Ie] rated operating current 9 A AC-3. Motor power in kW 4 kW at 380/400 V AC 50/60 Hz 4 kW at 415 V AC 50/60 Hz 4 kW at 440 V AC 50/60 Hz 2.2...

Available

Industrial equipment

Motorized control with automatic reclosing ARA for iC60 1P/1P+N/2P with 4 programs

IMPO A9C70132

€274.03

Motorized operator with automatic reclosing ARA for iC60 1P, 1P+N, 2P, 4 Prog, IP20, Type of control: Inhibition of automation maintained 230 V AC 50/60 Hz. Last pulse reclosing 230 V AC 50/60 Hz, Padlockable , Mounting mode: Adjustable clip, Mounting bracket: DIN rail, 440g, 93x63x75.5mm, White. Benefits: Discover the new iC60Acti9 DIN rail circuit...

Available

Industrial equipment

Base power 12A

IMPO LUB12

€103.26

Power base 12 A clamp screw control TeSys U. Device short name: LUB. Type of product or component Non-inverting Power Base. Number of poles: 3P. Suitability for isolating: Yes. [Ith] Conventional thermal current: 12 A. Utilization category: AC-41/AC-43/AC-44. Control circuit voltage: 110...220 V DC, 110...240 V AC. 50/60 Hz, 24 V AC 50/60 Hz, 24 V DC, 48...

ATV12 0,37KW 240V 1PH / FILTRO CEM CLASE B

ATV12 0,37KW 240V 1PH / FILTRO CEM CLASE B 2

Available

Industrial equipment

Variable speed drive ALTIVAR-12 0.37Kw 240V 1PH EMC filter

IMPO ATV12H037M2

€292.26

Schneider Electrics ALTIVAR-12 AC drive is a single phase variable speed asynchronous motor controller. This model has an EMC filter and has a nominal power of 0.37kW and a supply voltage of 240V. The dimensions of this variable frequency inverter are: 143mm in length, 72mm in width and 121mm in total depth. The Altivar ATV12 series consists of variable...

Available

Industrial equipment

Auxiliary contact fault/device status NC/NO

IMPO LUA1C11

€15.86

LUA signaling contact 1 NO + 1 NC. TeSys range. Device short name: LUA1. Error signaling. Rotary indicator handle in ready position. [Ue] rated operating voltage: 250 V AC = 250 V DC. [Ui] rated insulation voltage: 250 V according to CSA, 250 V according to IEC 60947-5-1, 250 V according to UL. [Ith] Conventional thermal current: 5 A. Minimum switching...

Available

Industrial equipment

IMN trip coil 220-240V AC

IMPO A9A26960

€80.34

iMN Acti9 undervoltage coil, Instantaneous, 220..240V AC, 50/60 Hz with action indicator. Adjustable clip mount and DIN rail mount. 18mm wide and white. Device short name: iMN. Standard control. Product compatibility with iDPN Vigi, iSW-NA, Dual Terminal, ARA, iID, iC60, Terminal and RCA. Benefits: Discover the new iC60Acti9 DIN rail circuit breaker up to...

Available

Industrial equipment

2P 2A magnetic circuit breaker

IMPO GB2CD07

€45.48

Thermal-magnetic circuit breaker 1P + N 2 A Id = 26 A TeSys GB2. Network type AC DC. Utilization category: Category A according to IEC 60947-2 DC-12 according to IEC 60947-5-1 DC-13 according to IEC 60947-5-1. Rated frequency of use: 50/60 Hz in accordance with IEC 60947-2. Breaking capacity Icu = 1 kA at 48 V DC according to IEC 60947-2 Icu = 15 kA at...

Available

Industrial equipment

ALTISTART-01 starter 5/5Kw three-phase 380/415V

IMPO ATS01N212QN

€304.13

The ALTISTART-01 5/5kW three-phase 380/415V starter. From the Altistart 01 range created and designed to work as a torque limiter when starting, or as a soft start or soft stop unit for asynchronous motors. This range of soft starters improves the starting performance of asynchronous motors by allowing them to start in a smooth, gradual and controlled...

Available

Industrial equipment

Single pilot light IIL 110-230V AC red

IMPO A9E18320

€17.96

iIL modular pilot light, Red, LED, 110-230 V AC 50/60 Hz, IP2, Local signaling: 1 lamp, Mounting mode: Fixed, Mounting support: Symmetrical DIN rail, 82x16x69.5mm.

Available

Industrial equipment

Base power 32A

IMPO LUB32

€121.77

Power base 32 A clamp screw control TeSys U. Device short name: LUB. Product or component type: Non-inverting Power Base. Number of poles: 3P. Suitability for isolating: Yes. [Ith] Conventional thermal current: 32 A. Utilization category: AC-41/AC-43/AC-44. Control circuit voltage: 110...220 V DC, 110...240 V AC 50/60 Hz, 24 V AC 50/60 Hz, 24 V DC, 48 V...

Available

Industrial equipment

Single pilot light IIL 110-230V AC green

IMPO A9E18321

€17.96

iIL modular pilot light, Green, 110-230 V AC 50/60 Hz, IP2, LED, Local signaling: 1 lamp, Mounting method: Fixed, Mounting support: Symmetrical DIN rail, 82x16x69.5mm.

Available

Industrial equipment

Auxiliary contact block 2 NO front

IMPO LADN20

€10.12

Auxiliary contact block 2 NO screw connection TeSys D. Product compatibility CR1F. Auxiliary contact operation: Instantaneous. Connections, terminals Screw clamp terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, with cable end. Screw fixing terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, without cable end. Screw fixing terminals 1 cable...

Product added to wishlist