2136

2136

Cobalt Wolfpack Hss Cylindrical Drill 3.00 mm.

Reference AFT 09060712

Available

€1.52

VAT included

Cylindrical Wolfpack Hss Cobalt Drill 3.00 mm.

Diameter: 3.0 mm.

Adjusted to DIN 338 standard.

Tip at 118º inclination.

General use in metals and plastics.

Made of HHS alloy and coblate, it guarantees greater durability than conventional drills, as well as superior cutting capacity, durability and resistance.

In stock 70 Items

Email address

Description

Cylindrical Wolfpack hss cobalt drill bit.
- Diameter: 3.0 mm.
- Adjusted to DIN 338 standard.
- Tip at 118º inclination.
- General use in metals and plastics.
- Made of HHS alloy and coblate guarantees greater durability than conventional drill bits, as well as superior cutting capacity, durability and resistance.

Product Details

EAN	8435231936446
Manufacturer	WOLFPACK
Reference	AFT 09060712
Measures	1x7x12 cm
High	1
Width	1
Long	7cm
Depth	7
Weight (kg)	0,002

In stock 70 Items

Reviews (0)

No reviews

GPSR

Fabricante	WOLFPACK LINEA PROFESIONAL
Dirección postal	Avenida de Andalucía 139, 18015 Granada
Contacto electrónico	[email protected]
Teléfono	+34 958208900
Referencia	AFT 09060712
EAN	8435231936446

12 other products in the same category:

Ruko-256050-Broca helicoidal DiN 1869 TL 3000 HSS-G extra larga (5x315 mm)

Ruko-256050-Broca helicoidal DiN 1869 TL 3000 HSS-G extra larga (5x315 mm) 2

Last units

Drills

RUKO extra long spiral drill bit HSS-G 5x315 mm DiN 1869 TL 3000

TUR 256050

The Ruko-256050 5x315 mm twist drill bit is designed for deep drilling under demanding conditions. Made of HSS-G steel, it offers high precision and is suitable for common materials. Slow drilling speeds and frequent chip removal are recommended.

Alargador Conos Morse Ext. 3 Int. 3

Available

Drills

Morse Taper Extension Ext. 3 Int. 3

COF 09940047

Morse cone extension accessory for adapter elements with "Morse cone"Morse Ext.: 3 Morse Int.: 3 L [mm]: 215

Ruko-108727-Broca hueca dientes metal duro vástago Weldon (Ø 27 mm)

Last units

Drills

RUKO carbide hollow drill bit Ø 27 mm with Weldon shank for precise drilling.

TUR 108727

Ruko-108727 hollow drill bit with carbide teeth and Weldon shank (Ø 27 mm). 50 mm depth, right-hand cutting. Compatible with RS 20-RS 30-RS 40 pillar drills. Ideal for steel, cast iron, non-ferrous metals, and plastics.

4597

Available

Drills

Alpen SDS Plus F8 drill bit 8.00 x 260 mm.

AFT 09089290

Alpen SDS Plus F8 drill 8.00 x 260 mm.Measure, diameter x length: 8.0 x 260 mm.High performance drill with 4 integral carbide cutting edges, Especially suitable for drilling reinforced concrete.Problem-free drilling of iron fittings.Runs with minimal vibrations and rapid removal of drilling dust. Exact through symmetrical head geometry.

Broca Hss Escalonada Ø 6 a 30 mm.

Broca Hss Escalonada Ø 6 a 30 mm. 2

Available

Drills

Stepped Hss Drill Ø 6 to 30 mm.

WOLFPACK LINEA PROFESIONAL

AFT 09062205

Stepped Hss Drill Ø 6 to 30 mm.Size: from 6 to 30 mm in diameter.Great elasticity.High resistance to fracture.Great drilling performance.Indicated for metals.

Broca cilíndrica corta hsse din-338n inox 12,00mm iz27535 koma tools / izar

Broca cilíndrica corta hsse din-338n inox 12,00mm iz27535 koma tools / izar 2

Available

Drills

HSSE DIN-338N Inox Short Cylindrical Drill Bit 12.00mm - Izar IZ27532

EDM 16592

HSSE DIN-338N Inox Short Cylindrical Drill Bit 12.00mm - Izar IZ27532 Cobalt steel drill bit for drilling stainless steels and titanium 12.00mm diameter Short and strong Complies with DIN-338N Suitable for steels with a strength of up to 1300 N/mm² Brand: Koma Tools (Izar)

Ruko-201090-Pack de 10 brocas helicoidales DIN 338 tipo N HSS laminada (Ø 9 mm)

Last units

Drills

RUKO Type N HSS Rolled Twist Drills Ø 9 mm - Pack of 10

TUR 201090

Pack of 10 DIN 338 type N HSS rolled twist drill bits (Ø 9 mm), ideal for drilling steel, cast iron, and alloys. High break strength, with a 118º cutting angle. Presented in a translucent plastic case.

Ruko-204185E-Broca helicoidal mango cónico DIN 345 tipo N HSS-Co 5 fresada-rectificada (Ø 18,50 mm)

Last units

Drills

RUKO Ø 18.50 mm HSS-Co 5 twist drill, milled and ground, type N DIN 345

TUR 204185E

Ruko-204185E tapered shank helical drill bit DIN 345 type N, made of HSS-Co 5. With a diameter of 18.50 mm, a cutting angle of 118º and a bright surface, it is ideal for working with steel, cast iron and acid-resistant steels.

BROCA HSS SERIE LARGA 5,50 MM. Venta unitaria

Available

Drills

Long HSS drill bit 5.50 mm, high-speed steel, ground, 118º, for steel and iron

COF 09860550-U

The 5.50 mm long series HSS drill bit is made of ground high-speed steel, compliant with DIN 338N, and features a 118° point. Designed for drilling steel and iron, its black finish provides durability and resistance. This product is sold individually, ideal for those seeking a quality tool for precision metalworking.

10391

10391 2

Available

Drills

Alpen Hss Sprint Master drill bit Ø 4.50 mm. (Blister 2 pieces)

AFT 09080320

Alpen Hss Sprint Master drill bit Ø 4.50 mm. (Blister 2 pieces)Diameter: 4.50 mm.Application: Universal twist drill with great elasticity. Highly suitable for use in manual drills, for processing alloy and non-alloy steel.Main features:30% faster.Use time 3 times longer.

2211

Last units

Drills

Alpen HSS Super drill bit 1.50 mm. (Blister 3 Pieces)

AFT 09080405

Alpen HSS Super drill bit 1.50 mm. (Blister 3 Pieces)Diameter: 1.5 mm.Precision grinding, minimum tolerances, maximum concentricity precision.Precise milling due to its optimized sharpening of the tip.Made of top quality steel.Resistant to breakage, due to controlled heat treatment.

Ruko-108160-Soporte rápido CM3 para pre-adaptar machos al taladro RS 40e/140e

Last units

Drills

RUKO quick support for taps to RS 40e/140e drill, compatible with CM3.

TUR 108160

Ruko-108160 quick-release chuck for pre-adapting taps to the RS 40e/140e drill. Compatible with RS 25e - RS 125e (CM2) and RS 40e - RS 140e (CM3) drills. Ideal for facilitating tap changes during drilling operations.

Product added to wishlist