Industrial automation

Showing 145-168 of 834 item(s)

Available

Industrial automation

Auxiliary contact fault/device status NC/NO

IMPO LUA1C11

LUA signaling contact 1 NO + 1 NC. TeSys range. Device short name: LUA1. Error signaling. Rotary indicator handle in ready position. [Ue] rated operating voltage: 250 V AC = 250 V DC. [Ui] rated insulation voltage: 250 V according to CSA, 250 V according to IEC 60947-5-1, 250 V according to UL. [Ith] Conventional thermal current: 5 A. Minimum switching...

Available

Industrial automation

IMN trip coil 220-240V AC

IMPO A9A26960

€74.98

iMN Acti9 undervoltage coil, Instantaneous, 220..240V AC, 50/60 Hz with action indicator. Adjustable clip mount and DIN rail mount. 18mm wide and white. Device short name: iMN. Standard control. Product compatibility with iDPN Vigi, iSW-NA, Dual Terminal, ARA, iID, iC60, Terminal and RCA. Benefits: Discover the new iC60Acti9 DIN rail circuit breaker up to...

Available

Industrial automation

2P 2A magnetic circuit breaker

IMPO GB2CD07

€42.45

Thermal-magnetic circuit breaker 1P + N 2 A Id = 26 A TeSys GB2. Network type AC DC. Utilization category: Category A according to IEC 60947-2 DC-12 according to IEC 60947-5-1 DC-13 according to IEC 60947-5-1. Rated frequency of use: 50/60 Hz in accordance with IEC 60947-2. Breaking capacity Icu = 1 kA at 48 V DC according to IEC 60947-2 Icu = 15 kA at...

Available

Industrial automation

ALTISTART-01 starter 5/5Kw three-phase 380/415V

IMPO ATS01N212QN

€295.99

The ALTISTART-01 5/5kW three-phase 380/415V starter. From the Altistart 01 range created and designed to work as a torque limiter when starting, or as a soft start or soft stop unit for asynchronous motors. This range of soft starters improves the starting performance of asynchronous motors by allowing them to start in a smooth, gradual and controlled...

Available

Industrial automation

Single pilot light IIL 110-230V AC red

IMPO A9E18320

€16.76

iIL modular pilot light, Red, LED, 110-230 V AC 50/60 Hz, IP2, Local signaling: 1 lamp, Mounting mode: Fixed, Mounting support: Symmetrical DIN rail, 82x16x69.5mm.

Available

Industrial automation

Base power 32A

IMPO LUB32

1 Reviews

€121.77

Power base 32 A clamp screw control TeSys U. Device short name: LUB. Product or component type: Non-inverting Power Base. Number of poles: 3P. Suitability for isolating: Yes. [Ith] Conventional thermal current: 32 A. Utilization category: AC-41/AC-43/AC-44. Control circuit voltage: 110...220 V DC, 110...240 V AC 50/60 Hz, 24 V AC 50/60 Hz, 24 V DC, 48 V...

Available

Industrial automation

Single pilot light IIL 110-230V AC green

IMPO A9E18321

€16.76

iIL modular pilot light, Green, 110-230 V AC 50/60 Hz, IP2, LED, Local signaling: 1 lamp, Mounting method: Fixed, Mounting support: Symmetrical DIN rail, 82x16x69.5mm.

Available

Industrial automation

Auxiliary contact block 2 NO front

IMPO LADN20

€9.44

Auxiliary contact block 2 NO screw connection TeSys D. Product compatibility CR1F. Auxiliary contact operation: Instantaneous. Connections, terminals Screw clamp terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, with cable end. Screw fixing terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, without cable end. Screw fixing terminals 1 cable...

Available

Industrial automation

Box starter 1S 12A 400V 50/60Hz

IMPO LE1D12V7

€100.94

TeSys LE, 12A boxed starter, 400 V AC coil. Range: TeSys - product name: TeSys LE - device short name: LE1D - utilization category: AC-3 - equipment composition: contactor, thermal overload relay to be ordered separately - motor power in kW: 3 kW at 220/230 V AC 50/60 Hz, 5.5 kW at 440 V AC 50/60 Hz, 5.5 kW at 380/400 V AC 50/60 Hz, 5.5 kW at 415 V AC...

Available

Industrial automation

Auxiliary contact block 3 NO/1 NC front

IMPO LADN31

€17.27

Auxiliary contact block 3 NO + 1 NC screw connection TeSys Dv. CR1F product compatibility. Auxiliary contact operation: Instantaneous. Connections, terminals Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, without cable end. Screw clamp terminals 1...

Available

Industrial automation

Temperature contact block T-0.1-30S

IMPO LADT2

€66.56

Timed contact block 1 NO + 1 NC screw connection TeSys D. Connections, terminals Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, without cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: solid, with cable end. Screw clamp...

Available

Industrial automation

Box starter 1S 18A 230V 50/60Hz

IMPO LE1D18P7

€127.46

Boxed starter 18 A coil 230 V AC TeSys LE. Short name of the LE1D device. Standard device application. Employment category AC-3. Composition of equipment Contactor Thermal overload relay to be ordered separately. [Ie] rated operating current 18 A AC-3. Motor power in kW 10 kW at 500 V AC 50/60 Hz 10 kW at 660/690 V AC 50/60 Hz 4 kW at 220/230 V AC 50/60...

Available

Industrial automation

Basic block 20A

IMPO V01

€17.13

Base block 3 poles 20 A TeSys VARIO. Product or component type: Switch body. Performance level: High performance. Number of poles: 3P. Types and composition of contacts: 3 NO. Network type: AC/DC. Mains frequency: 50/60 Hz.

Available

Industrial automation

Auxiliary contact block 2 NO side

IMPO LAD8N20

€13.06

Auxiliary contact block 2 NO TeSys D screw connection. Auxiliary contact operation: Instantaneous. Composition of contact poles 2 NO. Connections, terminals Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, without cable end. Screw clamp terminals 1...

Available

Industrial automation

Auxiliary contact block 2 NC front

IMPO LADN02

€9.38

Auxiliary contact block 2 NC screw connection TeSys D. Product compatibility CR1F. Auxiliary contact operation: Instantaneous. Connections, terminals Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, without cable end. Screw clamp terminals 1 cable...

BLOQUE CTOS AUXILIARES TESYS 2NA+2NC FRONTAL

BLOQUE CTOS AUXILIARES TESYS 2NA+2NC FRONTAL 2

Available

Industrial automation

Auxiliary contact block 2 NO/2 NC front

IMPO LADN22

3 Reviews

€18.50

Auxiliary contact block 2 NO + 2 NC screw connection TeSys D. Product compatibility CR1F. Auxiliary contact operation: Instantaneous. Composition of contact poles 2 NO + 2 NC. Connections, terminals Screw clamp terminals 1 cable 1.2.5 mm², cable stiffness: Flexible, with cable end. Screw fixing terminals 1 cable 1.2.5 mm², cable stiffness: Flexible,...

Available

Industrial automation

ISSW CM switch with 2 positions 2 contacts 20A 250V

IMPO A9E18071

€28.86

2-position linear switch Acti 9, 2 C/O, 20A, 230V, 50/60 Hz, 2-position handle control, adjustable clip mounting, DIN rail mounting, bare 9mm lower cable, with measurements of 84x36x75mm and White color. Standards: IEC 60669-1, IEC 60947-5-1.

Available

Industrial automation

2P 1A magnetic circuit breaker

IMPO GB2CD06

€42.45

Thermal-magnetic circuit breaker 1P + N 1 A Id = 14 A TeSys GB2. Network type AC DC. Utilization category: Category A according to IEC 60947-2 DC-12 according to IEC 60947-5-1 DC-13 according to IEC 60947-5-1. Rated frequency of use: 50/60 Hz in accordance with IEC 60947-2. Breaking capacity Icu = 50 kA at 230/240 V AC 50/60 Hz conforming to IEC 60947-2...

Available

Industrial automation

Installation auxiliary contact 1 NO+1 NC

IMPO LA1KN11

€8.34

Auxiliary contact block 1NO + 1NC TeSys K clamp screw connection. Device short name LA1. Auxiliary contact operation Instantaneous. Composition of contact poles 1 to + 1 NC. Connections, terminals Screw clamp terminals 1 cable 0.34...1.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 2 cable 0.34...1.5 mm², cable stiffness:...

Available

Industrial automation

Auxiliary contact installation 2 NO

IMPO LA1KN20

€8.34

Auxiliary contact block 2 NO clamp screw connection TeSys K. Device short name LA1. Instantaneous auxiliary contact operation. Composition of contact poles 2 NO. Connections, terminals Screw clamp terminals 1 cable 0.34...1.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 2 cable 0.34...1.5 mm², cable stiffness: Flexible, with cable...

Available

Industrial automation

Auxiliary contact block

IMPO LA1KN40

€15.43

Auxiliary contact block 4 NO clamp screw connection TeSys K. Device short name LA1. CA2K/CA3K product compatibility. Auxiliary contact operation Instantaneous. Composition of contact poles 4 NO. Connections, terminals Screw clamp terminals 1 cable 0.34...1.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 2 cable 0.34...1.5 mm²,...

Available

Industrial automation

Auxiliary contact block 1 NO/1 NC side

IMPO LAD8N11

€13.06

Auxiliary contact block 1NO + 1NC screw connection TeSys D. Auxiliary contact operation: Instantaneous. Composition of contact poles 1 to + 1 NC. Connections, terminals Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, with cable end. Screw clamp terminals 1 cable 1...2.5 mm², cable stiffness: Flexible, without cable end. Screw clamp...

Available

Industrial automation

Temperature contact block R-10-180S

IMPO LADR4

€80.76

Available

Industrial automation

Luminous block diameter 22 250V

IMPO ZBV6

€6.29

Luminous block Ø 22 base BA 9 s 250 V. Product range: Harmony XB4, Harmony XB5. Device short name: ZBV. Screw fixing terminals: 2 x 1.5 mm² with extr. Cable according to EN 60947-1, screw clamp terminals: 1 x 0.22 mm² without cable end according to EN 60947-1. Fixed signage. Bulb not included. BA 9s bulb base. Direct insulating separator. [Us] nominal...

Product added to wishlist