Drills

Showing 3217-3240 of 4881 item(s)

Ruko-102111E-Avellanador cónico DIN 335 forma C 90º HSS-Co 5 (Ø máx. 8,3 mm)

Ruko-102111E-Avellanador cónico DIN 335 forma C 90º HSS-Co 5 (Ø máx. 8,3 mm) 2

Available

Drills

RUKO HSS-Co 5 90º conical countersink, maximum diameter 8.3 mm.

TUR 102111E

The Ruko-102111E conical countersink, with a maximum diameter of 8.3 mm, is made of HSS-Co 5. Designed for precise cutting of non-ferrous metals and steel, it features a 90° countersinking angle and a cylindrical shank.

Broca Martillo Percutor Faster Plus 15x260

Broca Martillo Percutor Faster Plus 15x260 2

Available

Drills

Faster Plus Hammer Drill Bit 15x260

COF 097815260

€12.11

Wall drill bits, SDS PLUS anchor for hammer hammer. Measurements from 4mm to 26 and lengths from 160mm to 1000mmDiameter [mm]: 15 Length [mm]: 260 Cut [mm]: 200

Ruko-2004125-Broca helicoidal DIN 338 tipo N HSS rectificada con mango reducido (Ø 12,5 mm)

Available

Drills

RUKO HSS ground twist drill bit Ø 12.5 mm, type N, DIN 338, reduced shank.

TUR 2004125

€16.20

DIN 338 Type N HSS ground twist drill bit with reduced shank (Ø 12.5 mm). Designed for drilling, it offers high concentricity and precision. Ideal for steel, cast iron, and alloys. Includes a translucent plastic case. Cutting angle: 118°. Bright finish.

Ruko-101060E-Broca escalonada HSS-E Co 5 Cobalto Ø 6,0-37,0 mm (12 pasos)

Available

Drills

RUKO HSS-E Co 5 cobalt step drill Ø 6.0-37.0 mm (12 steps)

TUR 101060E

€186.76

Ruko-101060E HSS-E Co 5 Cobalt Step Drill Bit, ideal for drilling sheet metal up to 4 mm thick. With 12 steps, a spiral flute design, and precise cutting, it guarantees optimal performance without noise or vibration. Includes a translucent plastic case.

Ruko-1081212-Broca sólida "Solid 3S" HSS vástago Weldon (Ø 12 mm)

Drills

RUKO HSS solid drill bit with Weldon shank Ø 12 mm for high precision and durability.

TUR 1081212

€47.82

Solid 3S HSS drill bit with Weldon shank (Ø 12 mm) for pillar and bench drills. 30 mm drilling depth and three cutting edges. Ideal for drilling steel, light metals, and non-ferrous metals. Includes plastic case.

Ruko-200115-Broca helicoidal DIN 338 tipo N HSS laminada con mango reducido (Ø 11,5 mm)

Available

Drills

RUKO HSS rolled twist drill bit Ø 11.5 mm, type N, DIN 338, reduced shank.

TUR 200115

€8.40

Ruko-200115 Type N HSS Rolled Twist Drill Bit with Reduced Shank (Ø 11.5 mm). Designed for drilling common materials, it offers high break strength and is ideal for large diameters. It features a cutting angle of 118°.

Available

Drills

Wood spade drill bit 28mm hepyc

ALM 3032.0465

€5.84

HEPYC 28mm wood spade drill bit, ideal for carpentry and DIY work. Its robust and sharp design guarantees a clean and precise cut in wood, offering superior performance. Made with high quality materials for greater durability and wear resistance. Hexagonal handle for a firm and secure grip. Perfect for clean and fast holes.

Blister 1 Uds Brocas Hss-Cobalto Din388 5,25 Mm

Available

Drills

Blister 1 Pcs Hss-Cobalt Drill Bits DIN388 5.25 mm

COF 09740525BL

€4.03

Drill bits in tube blister, made of high-speed steel, ground HSS Cobalt DIN 338N 118º. For steel and iron. Color blackDiameter: 5.25 mm

Ruko-102117-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 13,4 mm)

Ruko-102117-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 13,4 mm) 2

Available

Drills

RUKO HSS 90º conical countersink Ø max. 13.4 mm DIN 335 form C

TUR 102117

€24.71

The Ruko-102117 conical countersink, with a maximum diameter of 13.4 mm, features a 90° countersinking angle and an optimized design for precise cuts in non-ferrous metals, steel, and plastics. It includes a translucent plastic case.

Ruko-102120-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 19 mm)

Ruko-102120-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 19 mm) 2

Available

Drills

RUKO HSS 90º conical countersink Ø max. 19 mm DIN 335 form C

TUR 102120

€19.57

The Ruko-102120 is a DIN 335 90° conical countersink, made of HSS, with a maximum diameter of 19 mm. Designed for precise cutting of non-ferrous metals, steel, and plastics, it includes a translucent plastic case.

Drills

RUKO 20ml cutting paste for precise and long-lasting finishes.

TUR 101035

€8.92

Ruko-101035 is a 20ml cutting paste designed for precise cutting of non-ferrous metals, steel, and plastics. Its 118° cutting angle and CBN grinding ensure optimal performance without noise or vibration.

Available

Drills

Extra Long Wall Drill Bit 6mm x 400mm

COF 098506400

€4.38

Extra-long standard wall drill bit, with tungsten carbide insert (WIDIA)Diameter [mm]: 6 Length [mm]: 400

Ruko-102412-Avellanador plano DIN 373 180º HSS paso medio rosca M8

Drills

RUKO HSS 180º DIN 373 flat countersink, medium pitch M8 thread

TUR 102412

€34.67

The Ruko-102412 is a DIN 373 180° flat countersink made of HSS. Designed for hex and cylindrical head screws, it is ideal for steel and light metals. It includes a translucent plastic case and a cylindrical handle for direct drilling.

Drills

Cobalt Conical Handle Drill Bit 24 mm.

COF 09692400

€109.73

Cobalt drill bit with conical handle "Morse Cone" made of HSS CO high-speed steel, rectified and 118º tip, sharp.Diameter [mm]: 24 Cone: 3 Total length: 281 Cut length: 160

Ruko-102116A-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 12,4 mm)

Ruko-102116A-Avellanador cónico DIN 335 forma C 90º HSS (Ø máx. 12,4 mm) 2

Available

Drills

RUKO HSS 90º conical countersink for aluminum Ø max. 12.4 mm DIN 335 form C

TUR 102116A

€24.65

The Ruko-102116A countersink, with a maximum diameter of 12.4 mm, is ideal for aluminum and non-ferrous metals. It features a 90° countersinking angle and an optimized design for precise, vibration-free cutting. A plastic carrying case is included.

Ruko-101049H-Broca cónica para chapa HSS con mango hexagonal 1/4" Ø 5,0-20,0 mm

Drills

RUKO HSS conical drill bit with 1/4" hexagonal shank and diameter of 5.0-20.0 mm

TUR 101049H

€38.97

Ruko-101049H HSS tapered drill bit with 1/4" hex shank. Diameter from 5.0 to 20.0 mm. Designed for precise cuts in non-ferrous metals, steel, and plastics. Includes a translucent plastic case. Compatible with 1/4" drills and bit holders.

Ruko-214085-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 8,5 mm)

Ruko-214085-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 8,5 mm) 2

Drills

RUKO HSS Self-Centering Twist Drills Ø 8.5 mm - Pack of 10

TUR 214085

€27.09

Pack of 10 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 8.5 mm). Designed for drilling steel and other materials, they offer high concentricity, rotational accuracy, and efficient cutting in various industrial applications.

Ruko-2140575-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 5,75 mm)

Ruko-2140575-Pack de 10 brocas helicoidales DIN 338 tipo N HSS fresada-rectificada con autocentrado (Ø 5,75 mm) 2

Drills

RUKO HSS Self-Centering Twist Drills Ø 5.75 mm - Pack of 10

TUR 2140575

€13.02

Pack of 10 DIN 338 type N HSS twist drills, milled and ground, with self-centering (Ø 5.75 mm). Designed for drilling steel, cast iron, and alloys, they offer high concentricity, rotational accuracy, and efficient cutting. Ideal for demanding applications.

Ruko-108456-Broca hueca HSS multi-capas vástago Weldon (Ø 26 mm)

Drills

RUKO 26mm HSS hollow drill bit with Weldon shank for multi-layers.

TUR 108456

€63.38

Ruko-108456 HSS multi-layer hollow drill bit with Weldon shank (Ø 26 mm) and 55 mm depth. Its special spiral geometry with 3 cutting edges ensures stability and prevents breakage. No pre-drilling or centering is required for use.

Ruko-102317-Avellanador cónico DIN 335 forma C 90º HSS mango hexagonal 1/4" (Ø máx. 16,5 mm)

Ruko-102317-Avellanador cónico DIN 335 forma C 90º HSS mango hexagonal 1/4" (Ø máx. 16,5 mm) 2

Drills

RUKO HSS 90º conical countersink with 1/4" hexagonal handle (max. Ø 16.5 mm)

TUR 102317

€30.17

DIN 335 Form C 90° countersink, made of HSS with a 1/4" hexagonal shank. Ideal for non-ferrous metals, steel, and hard plastics. Optimized design for precise, vibration-free cutting. Includes a translucent plastic case.

Ruko-108520-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 20 mm)

Drills

RUKO HSS hollow drill bit with Weldon shank, 55 mm deep and 20 mm in diameter.

TUR 108520

€64.49

Ruko-108520 HSS hollow drill bit with Weldon shank and 55 mm depth (Ø 20 mm). Ideal for pillar and floor drills. Designed for drilling steel, light metals, and non-ferrous metals. Includes a translucent plastic storage case.

Drills

Hss Conical Handle Drill Bit 22 mm.

COF 09682200

€37.56

Drill with conical handle "Morse Cone" made of rectified HSS high-speed steel and 118º tip, sharp.Diameter [mm]: 22 Cone morse: 2 Total length: 248 Cut length: 150

Ruko-108521-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 21 mm)

Drills

RUKO HSS hollow drill bit, Weldon shank, 55 mm deep (Ø 21 mm)

TUR 108521

€68.99

Ruko-108521 HSS hollow drill bit with Weldon shank and 55 mm depth (Ø 21 mm). Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Includes a translucent plastic case.

Ruko-108535-Broca hueca HSS vástago Weldon profundidad 55 mm (Ø 35 mm)

Drills

RUKO HSS hollow drill bit with Weldon shank, 55 mm deep and 35 mm in diameter.

TUR 108535

€129.81

Ruko-108535 HSS hollow drill bit with Weldon shank and 55 mm depth (Ø 35 mm). Ideal for pillar and bench drills. Designed for drilling steel, light metals, and non-ferrous metals. Includes a translucent plastic case.

Product added to wishlist