Kit panel photovoltaic isolated basic 1 AC 350W
Kit photovoltaic isolated compound by:
1 photovoltaic Panel RED160 (160 Wp)
1 Battery TAB MOTION 150 (12V/150Ah)
1 Regulator VICTRON BlueSolar PWM 12/24V-10A
1 Converter VICTRON Phoenix 12V/350W
The isolated areas of the electricity distribution networks usually present a low density of population, difficult terrain and/or landscape interest.
For this reason, in most of these cases, the photovoltaic solar energy is the most economical and viable to produce electricity, and the technology is consolidated, which already has more than 50 years of implementation around the world.
Kits photovoltaic solar panels consist of the equipment necessary to generate energy according to needs (KWh/day), thus facilitating the selection of the most appropriate solution for each case, depending on the consumption of energy daily.
Kit pv Basic 1 AC 350W
Autonomy estimated with a consumption equivalent to 2/3 of the energy (Wh/day), usable in the period of winter.
Oriented, small teams consumption
The kit includes the battery terminals
Power generation (Wh/day)2 . See map at the bottom for more information on areas
- Zone 1: 280
- Zone 2: 310
- Zone 3: 380
- Zone 4: 430
- Zone 1: 500
- Zone 2: 650
- Zone 3: 660
- Zone 4: 680
Autonomy: 4 days
Map of the production of energy in an installation of photovoltaic panels
How much energy produced the pv installation?
The energy production of a photovoltaic panel depends mainly on the following factors:
- Power of the installation (Wp) and performance.
- Position of the plates; the more perpendicular the sun situemos the plate, the more energy production. In our latitude the most suitable position for photovoltaic plates of an isolated facility will be a south orientation and an inclination between 45 and 50°, in contrast to an installation of self-consumption the inclination most suitable will be 30 ° and 35 ° and in both cases, the plates shall be free of shadows.
- The incident solar radiation, will vary in function of the geographical location. On the chart indicate areas that have been considered to determine the solar production estimate, which is indicated in the descriptive tables of the kits.
In our latitude the most suitable position for photovoltaic panels of a stand-alone installation will be a south orientation and an inclination of 50 ° (favorable to the production of winter) and no shadows.
Components of the kit photovoltaic
The kit photovoltaic is composed by
Photovoltaic Panel AEG165
Battery I-ENERGY 150
Battery Monoblock semi traction lead acid open for solar applications, are battery-compact flat-plate and low-maintenance, ideal for use in small photovoltaic systems. Feature: * Plates flat thick * Up to 700 cycles to 60% depth of discharge (C10) with load profile UI to 20 ° C. * Connectors (A1, 8 Nm) * Containers made of ABS of high quality
Regulator STECA PR 1515
Charge regulators with technology PWM, which provides a high performance in the management of the process of charge/discharge of batteries, with high reliability and accuracy in installations of up to 1kWp. It has a large display that allows the user to know the status of the battery easily.
Converter VICTRON Phoenix
Converter pure sinwave output, high peak power and high efficiency. The combination of the technology of high frequency and line frequency guaranteed to give you the best of both worlds. Available in models between 150 VA and 5000 VA per module, with peak power very high
It is possible that some components may change due to updates and improvements of the kits of solar panels.
- Power (W)
No customer reviews for the moment.